Scientists devise method to prevent deadly hospital infections without antibiotics

Harmful microbes grow freely on implanted medical devices. A new method to apply a surface coating treatment to medical devices is likely to improve their safety, reducing patient complications and deaths.
Credit: Amir Sheikhi/Penn State

Novel surface treatment developed at UCLA stops microbes from adhering to medical devices like catheters and stents.

A hospital or medical clinic might be the last place you’d expect to pick up a nasty infection, but approximately 1.7 million Americans do each year, resulting in nearly 100,000 deaths from infection-related complications and roughly $30 billion in direct medical costs.

The biggest culprits, experts say — accounting for two-thirds of these infections — are medical devices like catheters, stents, heart valves and pacemakers, whose surfaces often become covered with harmful bacterial films. But a novel surface treatment developed by a UCLA-led team of scientists could help improve the safety of these devices and ease the economic burden on the health care system.

The new approach, tested in both laboratory and clinical settings, involves depositing a thin layer of what is known as zwitterionic material on the surface of a device and permanently binding that layer to the underlying substrate using ultraviolet light irradiation. The resulting barrier prevents bacteria and other potentially harmful organic materials from adhering to the surface and causing infection.

The team’s findings are published May 19 in the journal Advanced Materials.

In the laboratory, researchers applied the surface treatment to several commonly used medical device materials, then tested the modified materials’ resistance to various types of bacteria, fungi and proteins. They found that the treatment reduced biofilm growth by more than 80% — and in some cases up 93%, depending on the microbial strain.

“The modified surfaces exhibited robust resistance against microorganisms and proteins, which is precisely what we sought to achieve,” said Richard Kaner, UCLA’s Dr. Myung Ki Hong Professor of Materials Innovation and senior author of the research. “The surfaces greatly reduced or even prevented biofilm formation.

“And our early clinical results have been outstanding,” Kaner added.

The clinical research involved 16 long-term urinary catheter users who switched to silicone catheters with the new zwitterionic surface treatment. This modified catheter is the first product made by a company Kaner founded out of his lab, called SILQ Technologies Corp., and has been cleared for use in patients by the Food and Drug Administration.

Ten of the patients described their urinary tract condition using the surface-treated catheter as “much better” or “very much better,” and 13 chose to continue using the new catheter over conventional latex and silicone options after the study period ended.

“One patient came to UCLA a few weeks ago to thank us for changing her life — something that, as a materials scientist, I never thought was possible,” Kaner said. “Her previous catheters would become blocked after four days or so. She was in pain and needed repeated medical procedures to replace them. With our surface treatment, she now comes in every three weeks, and her catheters work perfectly without encrustation or occlusion — a common occurrence with her previous ones.”

Such catheter-related urinary tract problems are illustrative of the issues plaguing other medical devices, which, once inserted or implanted, can become breeding grounds for bacteria and harmful biofilm growth, said Kaner, a member of the California NanoSystems Institute at UCLA who is also a distinguished professor of chemistry and biochemistry, and of materials science and engineering. The pathogenic cells pumped out by these highly resilient biofilms then cause recurring infections in the body.

In response, medical staff routinely give strong antibiotics to patients using these devices, a short-term fix that poses a longer-term risk of creating life-threatening, antibiotic-resistant “superbug” infections. The more widely and frequently antibiotics are prescribed, Kaner said, the more likely bacteria are to develop resistance to them. A landmark 2014 report by the World Health Organization recognized this antibiotic overuse as an imminent public health threat, with officials calling for an aggressive response to prevent “a post-antibiotic era in which common infections and minor injuries which have been treatable for decades can once again kill.”

“The beauty of this technology,” Kaner said, “is that it can prevent or minimize the growth of biofilm without the use of antibiotics. It protects patients using medical devices — and therefore protects all of us — against microbial resistance and the proliferation of superbugs.”

The surface treatment’s zwitterion polymers are known to be extremely biocompatible, and they absorb water very tightly, forming a thin hydration barrier that prevents bacteria, fungi and other organic materials from adhering to surfaces, Kaner said. And, he noted, the technology is highly effective, non-toxic and relatively low in cost compared with other current surface treatments for medical devices, like antibiotic- or silver-infused coatings.

Beyond its use in medical devices, the surface treatment technique could have non-medical applications, Kaner said, potentially extending the lifetimes of water-treatment devices and improving lithium-ion battery performance.

Funding sources for the study included the National Institutes of Health, the National Science Foundation, the Canadian Institutes of Health Research, SILQ Technologies Corp. and the UCLA Sustainability Grand Challenge.

Co–lead authors of the study are Brian McVerry, Alex Polasko and Ethan Rao. McVerry helped develop this and other surface treatments during his UCLA doctoral research with Kaner and co-founded SILQ Technologies Corp., where is he now chief technology officer. Rao, director of research and development at SILQ, and study co-author Na He, a process engineer at SILQ, have conducted UCLA research in Kaner’s laboratory.

Other co-authors are the UCLA Samueli School of Engineering’s Shaily Mahendra, a professor of civil and environmental engineering, and Dino Di Carlo, a professor of bioengineering and of mechanical and aerospace engineering; Amir Sheikhi, an assistant professor of chemical and biomedical engineering at Penn State University; and Ali Khademhosseini, CEO of the Terasaki Institute for Biomedical Innovation and formerly a professor of bioengineering, chemical and biomolecular engineering, and radiological sciences at UCLA.

Media Contact

Stuart Wolpert
University of California – Los Angeles
swolpert@stratcomm.ucla.edu
Office: 310-206-0511

www.ucla.edu

Media Contact

Stuart Wolpert
University of California - Los Angeles

All latest news from the category: Life Sciences and Chemistry

Articles and reports from the Life Sciences and chemistry area deal with applied and basic research into modern biology, chemistry and human medicine.

Valuable information can be found on a range of life sciences fields including bacteriology, biochemistry, bionics, bioinformatics, biophysics, biotechnology, genetics, geobotany, human biology, marine biology, microbiology, molecular biology, cellular biology, zoology, bioinorganic chemistry, microchemistry and environmental chemistry.

Back to home

Comments (0)

Write a comment

Newest articles

Using GPUs to discover human brain connectivity

A new GPU-based machine learning algorithm developed by researchers at the Indian Institute of Science (IISc) can help scientists better understand and predict connectivity between different regions of the brain….

Detection of cancer biomarkers from blood samples

… using nanopore-based DNA computing technology. Cholangiocarcinoma, also known as bile duct cancer, is a cancer type with a characteristically high mortality. At the time of diagnosis, most bile duct…

Thin-film photovoltaic technology combines efficiency and versatility

Researchers at KIT develop perovskite/CIS tandem solar cells with an efficiency of nearly 25 percent; combination of materials enables mobile applications. Stacking solar cells increases their efficiency. Working with partners…

Partners & Sponsors