Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:


How Nano-Sensors Help with Treatment


ESF-funded project "SenseCare” at Chemnitz University of Technology successfully completed - Therapeutic support, especially for diabetes mellitus

In the medical field, flexible and highly sensitive sensors can combine diagnostics and treatment with high comfort for patients.

Pressure sensors at specific anatomical points of the foot transmit therapy-relevant data.

Photo: Screenshot project video

Printed, ultra-thin, and highly sensitive nanocomposite sensors, in particular, offer an adaptable and reliable solution to current technologies such as pressure sensors - a solution on which Chemnitz University of Technology has conducted research and presented results and prototypes.

The results are particularly relevant with regard to the treatment of patients in whom the blood sugar level is abnormally high (diabetes mellitus).

The aim of the project "High tech sensor technology for the challenge of demographic change in Saxony", which is based at the Professorship of Electrical Measurements and Sensor Technology (Prof. Dr. Olfa Kanoun) at Chemnitz University of Technology, was to develop sensor mats to support the treatment of pressure ulcers in patients with diabetes mellitus.

A special novelty of this project is the embedding of carbon nanotubes (CNT) based sensors that can measure pressure with high precision. The use of CNTs for the production of pressure sensors is a unique selling point of "SenseCare" for the healthcare and medical sector. A video clip presents essential aspects of this project in detail.

Prototypes illustrate areas of application - Mobile use via app possible

With their embedded sensor technology, these sensor mats are able to detect changes in temperature, pressure and humidity when they come into contact with the human body. For this purpose, the project team produced ultra-thin sensors in the micrometer range.

For comparison: human hair is between 30 and 120 micrometers thick. The research team developed the sensors on the basis of CNTs, which in turn are printed on polymer films. These sensors are suitable as aids in health care and for monitoring patients with certain health problems such as diabetes-related ulcers or non-healing wounds.

The operating principle of CNT-based pressure sensors is based on the measurable change in the electrical resistance of the sensor material when pressure, temperature and humidity change.

Two prototypes were developed for testing the sensors: a mat and a sole. The mat can be double-layered, i.e. it works on both sides and is capable of sensing temperature and humidity on one side and pressure on the other. The insole, on the other hand, can sense pressure at specific anatomical points, for example the ball of the foot and the heel.

This data is measured in real time and can be displayed via a graphical user interface. This is of particular interest to diabetes mellitus patients. In the laboratory this is done on the desktop, but mobile use via an app is conceivable and feasible.

The sensor insole can be used with patients to detect increased pressure on the foot to prevent foot injuries. Experienced users ensure that the pressure is distributed evenly. Patients with diabetes mellitus receive feedback via the ultra-thin shoe sole to correct their gait. After miniaturisation, the sensor mat can be used in the care sector to prevent bed sores and pressure sores in bedridden senior citizens or patients.

Successful presentation at trade fair - More quality of treatment and life

At the leading trade fair for sensors and measuring systems "Sensor+Test" last year, the sensor mat was presented to a specialist audience and received very positive reactions from the participants.

The developments in sensor technology achieved in "SenseCare" have a lot of potential because demographic change and the increasing proportion of diabetes mellitus make user-friendly solutions a necessity in order to enable more treatment and quality of life for those affected, their relatives and caregivers. This technology can prevent further physical damage and relieve the burden on caregivers. With its extremely thin sensors, the developed sensor solution is cost-effective and durable, thus representing an advance over existing sensor systems.

Background: "SenseCare”

The "SenseCare" research project was led by Prof. Dr. Olfa Kanoun, holder of the Professorship of Electrical Measurements and Sensor Technology at Chemnitz University of Technology. A multidisciplinary core team of nine young scientists worked on the project. The departments of Inorganic Chemistry (Prof. Dr. Heinrich Lang), Digital Printing and Imaging Technology (Prof. Dr. Reinhard Baumann), Microsystems and Biomedical Engineering (Prof. Dr. Jan Mehner) and Human Locomotion (Prof. Dr. Thomas L. Milani) were also involved. "SenseCare" was financed by the European Social Fund (ESF) and with tax money from the Free State of Saxony based on the budget approved by the members of the Saxon State Parliament.

Wissenschaftliche Ansprechpartner:

Prof. Dr.-Ing. Olfa Kanoun, Professorship of Electrical Measurements and Sensor Technology, Tel. +49 (0) 371/531-36931, E-Mail:

Weitere Informationen:

Matthias Fejes | Technische Universität Chemnitz
Further information:

More articles from Power and Electrical Engineering:

nachricht Anode material for safe batteries with a long cycle life
06.08.2020 | Karlsruher Institut für Technologie (KIT)

nachricht ETRI develops eco-friendly color thin-film solar cells
31.07.2020 | National Research Council of Science & Technology

All articles from Power and Electrical Engineering >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: ScanCut project completed: laser cutting enables more intricate plug connector designs

Scientists at the Fraunhofer Institute for Laser Technology ILT have come up with a striking new addition to contact stamping technologies in the ERDF research project ScanCut. In collaboration with industry partners from North Rhine-Westphalia, the Aachen-based team of researchers developed a hybrid manufacturing process for the laser cutting of thin-walled metal strips. This new process makes it possible to fabricate even the tiniest details of contact parts in an eco-friendly, high-precision and efficient manner.

Plug connectors are tiny and, at first glance, unremarkable – yet modern vehicles would be unable to function without them. Several thousand plug connectors...

Im Focus: New Strategy Against Osteoporosis

An international research team has found a new approach that may be able to reduce bone loss in osteoporosis and maintain bone health.

Osteoporosis is the most common age-related bone disease which affects hundreds of millions of individuals worldwide. It is estimated that one in three women...

Im Focus: AI & single-cell genomics

New software predicts cell fate

Traditional single-cell sequencing methods help to reveal insights about cellular differences and functions - but they do this with static snapshots only...

Im Focus: TU Graz Researchers synthesize nanoparticles tailored for special applications

“Core-shell” clusters pave the way for new efficient nanomaterials that make catalysts, magnetic and laser sensors or measuring devices for detecting electromagnetic radiation more efficient.

Whether in innovative high-tech materials, more powerful computer chips, pharmaceuticals or in the field of renewable energies, nanoparticles – smallest...

Im Focus: Tailored light inspired by nature

An international research team with Prof. Cornelia Denz from the Institute of Applied Physics at the University of Münster develop for the first time light fields using caustics that do not change during propagation. With the new method, the physicists cleverly exploit light structures that can be seen in rainbows or when light is transmitted through drinking glasses.

Modern applications as high resolution microsopy or micro- or nanoscale material processing require customized laser beams that do not change during...

All Focus news of the innovation-report >>>



Industry & Economy
Event News

“Conference on Laser Polishing – LaP 2020”: The final touches for surfaces

23.07.2020 | Event News

Conference radar for cybersecurity

21.07.2020 | Event News

Contact Tracing Apps against COVID-19: German National Academy Leopoldina hosts international virtual panel discussion

07.07.2020 | Event News

Latest News

Rare Earth Elements in Norwegian Fjords?

06.08.2020 | Earth Sciences

Anode material for safe batteries with a long cycle life

06.08.2020 | Power and Electrical Engineering

Turning carbon dioxide into liquid fuel

06.08.2020 | Life Sciences

Science & Research
Overview of more VideoLinks >>>