From January 29 – 31, Siemens will be exhibiting its portfolio of modular solutions for automation, energy management and heat recovery at booth B19 in Hall 4.
The focus of the Siemens offering will be on the Simatic product spectrum with the scalable Simatic PCS 7 process control system, and on its wide-ranging process instrumentation and analytics portfolio for the biogas industry.
Siemens will also be showcasing its SST-040 mini steam turbine designed for the generation of electricity in the 60 – 300 kilowatt power range.
The company will also be unveiling its Set BGA(Bio- Gas-Analysis) system based on the Ultramat 23 gas analyzer.
Completing the Siemens trade fair offering will be a lecture on the topic of “Distributed power generation from waste heat“ as part of the Forum enertec in Hall 4 (January 29, 2013, 2 p.m.).
| Siemens Presseservice
Fraunhofer HHI at Mobile World Congress with VR and 5G technologies
24.02.2017 | Fraunhofer-Institut für Nachrichtentechnik, Heinrich-Hertz-Institut, HHI
MWC 2017: 5G Capital Berlin
24.02.2017 | FOKUS - Fraunhofer-Institut für Offene Kommunikationssysteme
On January 15, 2009, Chesley B. Sullenberger was celebrated world-wide: after the two engines had failed due to bird strike, he and his flight crew succeeded after a glide flight with an Airbus A320 in ditching on the Hudson River. All 155 people on board were saved.
On January 15, 2009, Chesley B. Sullenberger was celebrated world-wide: after the two engines had failed due to bird strike, he and his flight crew succeeded...
In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport
Cells need to repair damaged DNA in our genes to prevent the development of cancer and other diseases. Our cells therefore activate and send “repair-proteins”...
The Fraunhofer IWS Dresden and Technische Universität Dresden inaugurated their jointly operated Center for Additive Manufacturing Dresden (AMCD) with a festive ceremony on February 7, 2017. Scientists from various disciplines perform research on materials, additive manufacturing processes and innovative technologies, which build up components in a layer by layer process. This technology opens up new horizons for component design and combinations of functions. For example during fabrication, electrical conductors and sensors are already able to be additively manufactured into components. They provide information about stress conditions of a product during operation.
The 3D-printing technology, or additive manufacturing as it is often called, has long made the step out of scientific research laboratories into industrial...
Nature does amazing things with limited design materials. Grass, for example, can support its own weight, resist strong wind loads, and recover after being...
13.02.2017 | Event News
10.02.2017 | Event News
09.02.2017 | Event News
27.02.2017 | Materials Sciences
27.02.2017 | Interdisciplinary Research
27.02.2017 | Life Sciences