CoAxial-Extruder-Extruder with coaxial solid feeding screw
The CoAxial Extruder is an extruder with an independently
controlled feeding screw. This additional feeding screw extends over the whole feeding section. The plasticizing screw within the feeding section may be designed with flights so it works like a normal screw in a smooth barrel or a grooved bush extruder with static barrel. This leads to reduced abrasion. The total specific throughput is the sum of each of the individual flow rates conveyed by the feeding screw and plasticizing screw, respectively. The interior surface design of the feeding screw may be either smooth or grooved. This design concept contains a suitable control system for the regulation of the flow rate according to the process parameters.
Further Information: PDF
PROvendis GmbH
Phone: +49 (0)208/94105 0
Contact
Dipl.-Ing. Alfred Schillert
Media Contact
All latest news from the category: Technology Offerings
Newest articles
Recovering phosphorus from sewage sludge ash
Chemical and heat treatment of sewage sludge can recover phosphorus in a process that could help address the problem of diminishing supplies of phosphorus ores. Valuable supplies of phosphorus could…
Efficient, sustainable and cost-effective hybrid energy storage system for modern power grids
EU project HyFlow: Over three years of research, the consortium of the EU project HyFlow has successfully developed a highly efficient, sustainable, and cost-effective hybrid energy storage system (HESS) that…
After 25 years, researchers uncover genetic cause of rare neurological disease
Some families call it a trial of faith. Others just call it a curse. The progressive neurological disease known as spinocerebellar ataxia 4 (SCA4) is a rare condition, but its…