Siemens at the Hannover Messe 2015, Hall 9, Booth 35D
The Sirius 3SK2 safety relay from Siemens offers multiple safety functions in the smallest of spaces. Thanks to the user-friendly drag & drop parameterization interface, it is simple to create safety functions that can be optionally expanded to include test and diagnostics functions.
Sirius 3SK2 safety relays come in two different variants – the 22.5-millimeter-wide device, which comes with up to four safety functions, is slimmer than any other software-parameterizable safety relay currently available on the market, while the 45-millimeter-wide device, which offers up to six safety functions, comes equipped with a diagnostics display. The functions of the 3SK2 fail-safe outputs can be assigned independently of each other.
Typical applications for Sirius 3SK2 devices include emergency stop pushbuttons, protective doors with tumblers, or material feeder systems with light barrier sensor technology. Additional safety applications are simple to implement for specific requirements.
The fail-safe outputs can be supplemented in a modular fashion as required – even without additional wiring. Just like devices in the Sirius 3SK1 series, Sirius 3SK2 units are simple to combine with conventional industrial controls, for example, devices from the Sirius 3RM1 motor starter range can be simply integrated using device connectors.
For further information, please see www.siemens.com/safety-relays
Siemens AG (Berlin and Munich) is a global technology powerhouse that has stood for engineering excellence, innovation, quality, reliability and internationality for more than 165 years. The company is active in more than 200 countries, focusing on the areas of electrification, automation and digitalization. One of the world's largest producers of energy-efficient, resource-saving technologies, Siemens is No. 1 in offshore wind turbine construction, a leading supplier of combined cycle turbines for power generation, a major provider of power transmission solutions and a pioneer in infrastructure solutions as well as automation, drive and software solutions for industry. The company is also a leading provider of medical imaging equipment – such as computed tomography and magnetic resonance imaging systems – and a leader in laboratory diagnostics as well as clinical IT. In fiscal 2014, which ended on September 30, 2014, Siemens generated revenue from continuing operations of €71.9 billion and net income of €5.5 billion. At the end of September 2014, the company had around 343,000 employees worldwide on a continuing basis.
Further information is available on the Internet at www.siemens.com
Reference Number: PR2015040175DFEN
Mr. Gerhard Stauß
Digital Factory Division
Gleiwitzer Str. 555
Tel: +49 (911) 895-7945
Gerhard Stauß | Siemens Digital Factory
Further reports about: > Digital Factory > Siemens > Sirius > computed tomography > laboratory diagnostics > magnetic resonance > magnetic resonance imaging > medical imaging > offshore wind turbine > power generation > sensor technology > specific requirements > tomography > transmission solutions > wind turbine
AchemAsia 2019 will take place in Shanghai
15.06.2018 | DECHEMA Gesellschaft für Chemische Technik und Biotechnologie e.V.
Insects supply chitin as a raw material for the textile industry
05.06.2018 | Fraunhofer-Institut für Grenzflächen- und Bioverfahrenstechnik IGB
In a recent publication in the renowned journal Optica, scientists of Leibniz-Institute of Photonic Technology (Leibniz IPHT) in Jena showed that they can accurately control the optical properties of liquid-core fiber lasers and therefore their spectral band width by temperature and pressure tuning.
Already last year, the researchers provided experimental proof of a new dynamic of hybrid solitons– temporally and spectrally stationary light waves resulting...
Scientists from the University of Freiburg and the University of Basel identified a master regulator for bone regeneration. Prasad Shastri, Professor of...
Moving into its fourth decade, AchemAsia is setting out for new horizons: The International Expo and Innovation Forum for Sustainable Chemical Production will take place from 21-23 May 2019 in Shanghai, China. With an updated event profile, the eleventh edition focusses on topics that are especially relevant for the Chinese process industry, putting a strong emphasis on sustainability and innovation.
Founded in 1989 as a spin-off of ACHEMA to cater to the needs of China’s then developing industry, AchemAsia has since grown into a platform where the latest...
The BMBF-funded OWICELLS project was successfully completed with a final presentation at the BMW plant in Munich. The presentation demonstrated a Li-Fi communication with a mobile robot, while the robot carried out usual production processes (welding, moving and testing parts) in a 5x5m² production cell. The robust, optical wireless transmission is based on spatial diversity; in other words, data is sent and received simultaneously by several LEDs and several photodiodes. The system can transmit data at more than 100 Mbit/s and five milliseconds latency.
Modern production technologies in the automobile industry must become more flexible in order to fulfil individual customer requirements.
An international team of scientists has discovered a new way to transfer image information through multimodal fibers with almost no distortion - even if the fiber is bent. The results of the study, to which scientist from the Leibniz-Institute of Photonic Technology Jena (Leibniz IPHT) contributed, were published on 6thJune in the highly-cited journal Physical Review Letters.
Endoscopes allow doctors to see into a patient’s body like through a keyhole. Typically, the images are transmitted via a bundle of several hundreds of optical...
13.06.2018 | Event News
08.06.2018 | Event News
05.06.2018 | Event News
22.06.2018 | Materials Sciences
22.06.2018 | Earth Sciences
22.06.2018 | Life Sciences