These events are expensive, time-consuming and potentially dangerous. To help first responders at all levels of government deal safely and more effectively with suspected biothreat agents, the National Institute of Standards and Technology (NIST) and a broad team of federal, state and local agencies and other organizations worked together to update an existing standard for sample collection and develop overall guidance for when to collect a sample and how to coordinate with other agencies and organizations.
The original standard protocol for collecting and preserving samples of suspicious powders was developed and published in 2006 at the request of the U.S. Department of Homeland Security by a multiagency team coordinated by NIST and AOAC (Association of Analytical Communities) International. It outlined a two-step process for collecting bulk samples of suspicious powder from a solid surface such as a desktop or tile, and the collection of residual material with swabs for use in field evaluation.
Recommendations for developing new, general guidelines to facilitate sample collection and coordination with a receiving laboratory came from members of two focus groups from the first responder community. With expertise in sample collection and forensic research, and unique relationships with government agencies and stakeholder communities, NIST, together with a coalition of federal, state and local agencies and stakeholder organizations, was able to revise the standard and develop new guidance.
Because many of the organizations involved in responding to these incidents have different concerns and needs for sample collection, broad acceptance of the new standard and guidance is critical. For example, first responders initially assess a situation by performing a risk assessment in coordination with public health response, including the Centers for Disease Control and Prevention, and law enforcement, including the Federal Bureau of Investigation. The primary concern of this assessment is protecting the public while preserving the chain of custody if the incident is a confirmed biothreat event and material is used as evidence in a criminal investigation.
"The new guidance explains that first response agencies should do the legwork now to establish relationships they will need in the event of an incident," says Jayne Morrow, an environmental engineer at NIST who led the revision project. "For example, it provides recommendations regarding who should be at the planning table, and it even recommends creating a laminated card of phone numbers for expert support to enable first responders to effectively address one of these situations.
"What first responders tell us they like about this guidance is that it's appropriate for any jurisdiction, regardless of its size and resources," says Morrow. "And the key message is that, through response coordination and communication, we can effectively deal with an event in a timely and appropriate manner."
The revised protocol, "Standard Practices for Bulk Sample Collection and Swab Sample Collection of Visible Powders Suspected of Being Biothreat Agents from Nonporous Surfaces" (E2458-10) and the "Standard Guide for Operational Guidelines for Initial Response to a Suspected Biothreat Agent" (E2770-10) are now available from ASTM International, a provider of international voluntary consensus standards.
Jennifer Huergo | EurekAlert!
Link Discovered between Immune System, Brain Structure and Memory
26.04.2017 | Universität Basel
Researchers develop eco-friendly, 4-in-1 catalyst
25.04.2017 | Brown University
More and more automobile companies are focusing on body parts made of carbon fiber reinforced plastics (CFRP). However, manufacturing and repair costs must be further reduced in order to make CFRP more economical in use. Together with the Volkswagen AG and five other partners in the project HolQueSt 3D, the Laser Zentrum Hannover e.V. (LZH) has developed laser processes for the automatic trimming, drilling and repair of three-dimensional components.
Automated manufacturing processes are the basis for ultimately establishing the series production of CFRP components. In the project HolQueSt 3D, the LZH has...
Reflecting the structure of composites found in nature and the ancient world, researchers at the University of Illinois at Urbana-Champaign have synthesized thin carbon nanotube (CNT) textiles that exhibit both high electrical conductivity and a level of toughness that is about fifty times higher than copper films, currently used in electronics.
"The structural robustness of thin metal films has significant importance for the reliable operation of smart skin and flexible electronics including...
The nearby, giant radio galaxy M87 hosts a supermassive black hole (BH) and is well-known for its bright jet dominating the spectrum over ten orders of magnitude in frequency. Due to its proximity, jet prominence, and the large black hole mass, M87 is the best laboratory for investigating the formation, acceleration, and collimation of relativistic jets. A research team led by Silke Britzen from the Max Planck Institute for Radio Astronomy in Bonn, Germany, has found strong indication for turbulent processes connecting the accretion disk and the jet of that galaxy providing insights into the longstanding problem of the origin of astrophysical jets.
Supermassive black holes form some of the most enigmatic phenomena in astrophysics. Their enormous energy output is supposed to be generated by the...
The probability to find a certain number of photons inside a laser pulse usually corresponds to a classical distribution of independent events, the so-called...
Microprocessors based on atomically thin materials hold the promise of the evolution of traditional processors as well as new applications in the field of flexible electronics. Now, a TU Wien research team led by Thomas Müller has made a breakthrough in this field as part of an ongoing research project.
Two-dimensional materials, or 2D materials for short, are extremely versatile, although – or often more precisely because – they are made up of just one or a...
20.04.2017 | Event News
18.04.2017 | Event News
03.04.2017 | Event News
26.04.2017 | Materials Sciences
26.04.2017 | Agricultural and Forestry Science
26.04.2017 | Physics and Astronomy