Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Solar Power: Is It Time for the Big Push?

04.02.2013
There are great expectations for solar power, especially in the coming years, when the International Energy Agency projects solar to grow faster than any other renewable power. But what does science need to do to more fully respond to the opportunities ahead?
Recently, three researchers discussed this with fellow scientist Harry A. Atwater, Jr., director of the DOE Energy Frontier Research Center on Light-Material Interactions in Solar Energy Conversion, as well as member of the Kavli Nanoscience Institute (KNI) at the California Institute of Technology. To really give solar power a push, the scientists raised advancing how new materials are created, developed and brought to industry.

“We need to engage with manufacturers and end-users of the technology as soon as possible, rather than spend years doing lab demonstrations before anyone talks with industry,” said Michael Wasielewski, director of the Argonne-Northwestern Solar Energy Research Center and professor at Northwestern University. “We need to take advantage of manufacturers' expertise in how things are really done. On our part, we need to let them know about promising materials sooner, so they start to think about commercialization pathways earlier in the process.”

It was also pointed out that barriers in the laboratory needed breaking. “I work more on the physics side, but there is a separation between what I do and the chemistry needed to make this work,” said Albert Polman, director of the Dutch Foundation for Fundamental Research on Matter's Institute for Atomic and Molecular Physics in Amsterdam, The Netherlands. “To make things happen faster, we need to have the disciplines talk to one another more than in the past.”

Another challenge is making new technology more affordable. Nathan Lewis is principal investigator of the Joint Center for Artificial Photosynthesis, the U.S. Department of Energy’s Energy Innovation Hub in Fuels from Sunlight at the California Institute of Technology, where he is also a member of KNI. Said Lewis, “[W]e need to really scale up manufacturing to make this technology cheap. Right now, making solar cells is like making other highly engineered technologies, such as silicon chips. What we need are technologies that let us churn it out inexpensively, like newspaper or bubble wrap.”

Scaling up means bridging a financial gulf, noted Atwater. “[T]o commercialize solar technologies, we must get past the valley of death – that big gap between demonstrating a technology and finding someone to invest $100 million for large-scale manufacturing,” he said.

For the complete discussion, visit:
http://www.kavlifoundation.org/science-spotlights/caltech-solar-power-big-push

James Cohen | Newswise
Further information:
http://www.kavlifoundation.org

More articles from Power and Electrical Engineering:

nachricht Did you know that the wrapping of Easter eggs benefits from specialty light sources?
13.04.2017 | Heraeus Noblelight GmbH

nachricht To e-, or not to e-, the question for the exotic 'Si-III' phase of silicon
05.04.2017 | Carnegie Institution for Science

All articles from Power and Electrical Engineering >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Making lightweight construction suitable for series production

More and more automobile companies are focusing on body parts made of carbon fiber reinforced plastics (CFRP). However, manufacturing and repair costs must be further reduced in order to make CFRP more economical in use. Together with the Volkswagen AG and five other partners in the project HolQueSt 3D, the Laser Zentrum Hannover e.V. (LZH) has developed laser processes for the automatic trimming, drilling and repair of three-dimensional components.

Automated manufacturing processes are the basis for ultimately establishing the series production of CFRP components. In the project HolQueSt 3D, the LZH has...

Im Focus: Wonder material? Novel nanotube structure strengthens thin films for flexible electronics

Reflecting the structure of composites found in nature and the ancient world, researchers at the University of Illinois at Urbana-Champaign have synthesized thin carbon nanotube (CNT) textiles that exhibit both high electrical conductivity and a level of toughness that is about fifty times higher than copper films, currently used in electronics.

"The structural robustness of thin metal films has significant importance for the reliable operation of smart skin and flexible electronics including...

Im Focus: Deep inside Galaxy M87

The nearby, giant radio galaxy M87 hosts a supermassive black hole (BH) and is well-known for its bright jet dominating the spectrum over ten orders of magnitude in frequency. Due to its proximity, jet prominence, and the large black hole mass, M87 is the best laboratory for investigating the formation, acceleration, and collimation of relativistic jets. A research team led by Silke Britzen from the Max Planck Institute for Radio Astronomy in Bonn, Germany, has found strong indication for turbulent processes connecting the accretion disk and the jet of that galaxy providing insights into the longstanding problem of the origin of astrophysical jets.

Supermassive black holes form some of the most enigmatic phenomena in astrophysics. Their enormous energy output is supposed to be generated by the...

Im Focus: A Quantum Low Pass for Photons

Physicists in Garching observe novel quantum effect that limits the number of emitted photons.

The probability to find a certain number of photons inside a laser pulse usually corresponds to a classical distribution of independent events, the so-called...

Im Focus: Microprocessors based on a layer of just three atoms

Microprocessors based on atomically thin materials hold the promise of the evolution of traditional processors as well as new applications in the field of flexible electronics. Now, a TU Wien research team led by Thomas Müller has made a breakthrough in this field as part of an ongoing research project.

Two-dimensional materials, or 2D materials for short, are extremely versatile, although – or often more precisely because – they are made up of just one or a...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Fighting drug resistant tuberculosis – InfectoGnostics meets MYCO-NET² partners in Peru

28.04.2017 | Event News

Expert meeting “Health Business Connect” will connect international medical technology companies

20.04.2017 | Event News

Wenn der Computer das Gehirn austrickst

18.04.2017 | Event News

 
Latest News

Wireless power can drive tiny electronic devices in the GI tract

28.04.2017 | Medical Engineering

Ice cave in Transylvania yields window into region's past

28.04.2017 | Earth Sciences

Nose2Brain – Better Therapy for Multiple Sclerosis

28.04.2017 | Life Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>