Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Nearly zero-energy buildings: A difficult challenge for Southern Europe

20.12.2017

Researchers at the UPV/EHU-University of the Basque Country have analyzed the building situation in countries in southern Europe

Over the coming years there is a legal commitment for all the countries of Europe to improve the energy efficiency of buildings, which boils down to constructing nearly zero-energy buildings (nZEBs), in other words, buildings that consume the minimum of energy.


This is a thermal image of a Basque Country building in the 70s, where heat loss is evidenced due to lack of insulation.

Credit: Juan María Hidalgo / UPV/EHU

The EU Directive 31/2010 establishes two key deadlines: that all public buildings must be nZEBs as from 1 January, 2019, and two years later, by 1 January 2021, all new buildings must be nZEBs. "It is only 1 year until the first commitment and yet many countries are a long way from meeting this level of energy efficiency in buildings.

The countries that have made the most progress in this challenge are the ones in central and northern Europe," explained Juan María Hidalgo, co-author of the study.

This research led by the Université de Liege was carried out by over a dozen European researchers and analyses the construction situation in seven countries in Southern Europe (Cyprus, France, Greece, Italy, Portugal, Romania and Spain). Each country has subtle differences in the technical definitions that make it very difficult to directly compare the nZEB regulations and impulse programmes. That is why "we participants in the study made an effort to reach agreement on a common methodology. It was the only way of making real comparisons on a like-for-like basis," added Hidalgo.

Social and technological barriers

The research focussed on the comparison of the social and technological barriers hampering the development of nZEBs, with respect to both new buildings and the retrofitting of existing properties. Until now many studies justified the south-north delays by citing the economic context. Yet this work has shown that there are other barriers, such as sociological ones and the climate conditions of each country that greatly affect the achieving of the aims of nearly zero-energy buildings.

"The poor training of practically all the players, starting with the administration, including construction workers, and going right up to citizens, constitutes a huge human chain in which there is still a lack of understanding about what nZEBs are and how to achieve them," stressed Hidalgo. Yet "building design has to be studied in greater detail to resolve the changes of season such as winter and summer, etc.", added Hidalgo. "The Basque Country could be a good test bench for that as it has nearly the whole range of climates in the study. Despite being a small region, we have to apply very different design criteria in coastal areas, mountainous areas, areas in the south, etc."

"If these barriers are not overcome, there will very likely be dissatisfaction with the actual result, since problems of thermal comfort, overheating, unnecessary additional costs in the building, etc. could arise, often exacerbated by the poor functioning of the buildings," said the researcher. So "the study is proposing improvements in the regulations, design, construction and use for buildings of this type," he added.

The researcher also stressed that because of the location and orientation possibilities, the use of new materials and technologies integrated into the design, it is more difficult to build a new nZEB than to transfer this concept to the sphere of retrofitting, since there is less room for manoeuvre and the costs also rise.

Juan María Hidalgo says "we are hoping that this study will help to solve the main difficulties in the sector and enable us to get to 2020 with a better-prepared building sector, with better tools and greater awareness". That way "it will be possible to build nZEBs that meet the needs of everyone, at the lowest cost and with the least environmental impact possible".

###

Bibliographical reference

Shady Attia, Polyvios Eleftheriou, Flouris Xeni, Rodolphe Morlot, Christophe Menézo, Vasilis Kostopoulos, Maria Betsi, Iakovos Kalaitzoglou, Lorenzo Pagliano, Maurizio Cellura, Manuela Almeida, Marco Ferreira, Tudor Baracu, Viorel Badescu, Ruxandra Crutescu, Juan Maria Hidalgo-Betanzos. "Overview and future challenges of nearly zero energy buildings (nZEB) design in Southern Europe" Energy and Buildings. Vol. 155. November 2017. Pages 439-458. https://doi.org/10.1016/j.enbuild.2017.09.043

Media Contact

Matxalen Sotillo
komunikazioa@ehu.eus
34-688-673-770

 @upvehu

http://www.ehu.es 

Matxalen Sotillo | EurekAlert!

More articles from Power and Electrical Engineering:

nachricht World's smallest optical implantable biodevice
26.04.2018 | Nara Institute of Science and Technology

nachricht Cell membrane inspires new ultrathin electronic film
26.04.2018 | University of Tokyo

All articles from Power and Electrical Engineering >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Why we need erasable MRI scans

New technology could allow an MRI contrast agent to 'blink off,' helping doctors diagnose disease

Magnetic resonance imaging, or MRI, is a widely used medical tool for taking pictures of the insides of our body. One way to make MRI scans easier to read is...

Im Focus: BAM@Hannover Messe: innovative 3D printing method for space flight

At the Hannover Messe 2018, the Bundesanstalt für Materialforschung und-prüfung (BAM) will show how, in the future, astronauts could produce their own tools or spare parts in zero gravity using 3D printing. This will reduce, weight and transport costs for space missions. Visitors can experience the innovative additive manufacturing process live at the fair.

Powder-based additive manufacturing in zero gravity is the name of the project in which a component is produced by applying metallic powder layers and then...

Im Focus: Molecules Brilliantly Illuminated

Physicists at the Laboratory for Attosecond Physics, which is jointly run by Ludwig-Maximilians-Universität and the Max Planck Institute of Quantum Optics, have developed a high-power laser system that generates ultrashort pulses of light covering a large share of the mid-infrared spectrum. The researchers envisage a wide range of applications for the technology – in the early diagnosis of cancer, for instance.

Molecules are the building blocks of life. Like all other organisms, we are made of them. They control our biorhythm, and they can also reflect our state of...

Im Focus: Spider silk key to new bone-fixing composite

University of Connecticut researchers have created a biodegradable composite made of silk fibers that can be used to repair broken load-bearing bones without the complications sometimes presented by other materials.

Repairing major load-bearing bones such as those in the leg can be a long and uncomfortable process.

Im Focus: Writing and deleting magnets with lasers

Study published in the journal ACS Applied Materials & Interfaces is the outcome of an international effort that included teams from Dresden and Berlin in Germany, and the US.

Scientists at the Helmholtz-Zentrum Dresden-Rossendorf (HZDR) together with colleagues from the Helmholtz-Zentrum Berlin (HZB) and the University of Virginia...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

VideoLinks
Industry & Economy
Event News

Invitation to the upcoming "Current Topics in Bioinformatics: Big Data in Genomics and Medicine"

13.04.2018 | Event News

Unique scope of UV LED technologies and applications presented in Berlin: ICULTA-2018

12.04.2018 | Event News

IWOLIA: A conference bringing together German Industrie 4.0 and French Industrie du Futur

09.04.2018 | Event News

 
Latest News

World's smallest optical implantable biodevice

26.04.2018 | Power and Electrical Engineering

Molecular evolution: How the building blocks of life may form in space

26.04.2018 | Life Sciences

First Li-Fi-product with technology from Fraunhofer HHI launched in Japan

26.04.2018 | Power and Electrical Engineering

VideoLinks
Science & Research
Overview of more VideoLinks >>>