In their report in the October issue of Preventive Medicine, Massachusetts General Hospital (MGH) investigators describe customer responses to surveys taken before and after the 2010 implementation of a system using green, yellow or red "traffic light" labels to reflect the nutritional quality of items.
In the Mass. General Hospital cafeteria, color-coded labels indicate the healthiest sandwich choices (green), along with those designated less (yellow) and least (red) healthy.
Credit: Mass. General Hospital Nutrition and Food Service
"Several small, experimental studies have suggested that 'traffic light' labels can be an effective method of promoting healthier choices, but there have been few real-world studies of customers' perceptions and purchasing behaviors in response to this type of labeling," explains Lillian Sonnenberg, DSc, RD, LDN, MGH Nutrition and Food Service, the corresponding author of the current report.
"Our results suggest that these labels are an effective method for conveying information about healthy and unhealthy choices and for prompting changes in purchasing behavior."
While many restaurants and other food service locations are now posting the calorie content of their standard items and make detailed information – such as fat, cholesterol and sodium content – available on request, the researchers note that interpreting this information requires knowledge and skills that many do not possess.
To find a simpler way to encourage more healthful purchases at the hospital's food service locations, MGH Nutrition and Food Service put together a plan that started with color-coding each item sold in the main cafeteria – green for the healthiest items, such as fruits, vegetables and lean meats; yellow for less healthy items, and red for those with little or no nutritional value.
Signage encouraged frequent purchase of green items, less frequent for yellow and discouraged purchase of red items. Cafeteria cash registers were programmed to record each purchased item as green, yellow or red, starting three months before the labeling intervention began.
Previous reports from the MGH team have described how the program – a second phase of which included rearranging items in refrigerators to bring healthy choices to eye level – increased sales of green items while decreasing purchase of red items. The current paper reports results of a survey taken during the month before and the two months after the labeling intervention began in March 2010. Research coordinators approached customers who had just made purchases and asked them to participate in the brief survey.
Participants were asked whether they had noticed any nutritional information in the cafeteria or on food labels, which factors most influenced their purchases, how often they consider nutrition information before making food choices, and how often they "choose food that is healthy." After introduction of the color-coded labels, respondents were also asked whether they had noticed the labels and if the labels had influenced their purchases.
During the baseline period before the labeling intervention, 204 individuals completed the survey, and 243 did so in the weeks following. While 46 percent of respondents indicated that health/nutrition was an important factor in their choices at baseline, 61 percent did so after the intervention. The percentage of those indicating that they looked at available nutritional information before a purchase doubled from 15 to 33 percent, although there was no significant difference in the percentage reporting they usually or always choose healthy foods. Respondents who reported noticing the new labels bought a greater proportion of green items and fewer red items than did those who did not notice, and the influence was even stronger among those who indicated being influenced by the labels.
"While our results can't give concrete information about customers' nutritional knowledge, people were more likely to indicate that health and nutrition were important factors in their decision when the labels were in place, and those who noticed the labels were more likely to purchase healthy items," Sonnenberg says. "Although we haven't directly compared these "traffic light" labels to other systems, we can say that these labels appear to be more effective than the standard nutritional labeling available on packaged products. The strategy is simpler for customers to understand at the point of purchase and, once the appropriate labels for each item are determined, is relatively easy to implement."
The labeling system – along with second phase of adjusting the positioning of items, which was not included in the current study – as now in place at all MGH food service locations. Co-authors of the Preventive Medicine article are Susan Barraclough, MS, RD, LDN, and Emily Gelsomin, RD, LDN, MGH Nutrition and Food Services; Anne Thorndike, MD, MPH, MGH division of General Medicine; Douglas Levy, PhD, Mongan Institute of Health Policy at MGH; and Jason Riis, PhD, Harvard Business School.
Massachusetts General Hospital, founded in 1811, is the original and largest teaching hospital of Harvard Medical School. The MGH conducts the largest hospital-based research program in the United States, with an annual research budget of more than $775 million and major research centers in AIDS, cardiovascular research, cancer, computational and integrative biology, cutaneous biology, human genetics, medical imaging, neurodegenerative disorders, regenerative medicine, reproductive biology, systems biology, transplantation biology and photomedicine.
Cassandra Aviles | EurekAlert!
Custom-tailored strategy against glioblastomas
26.09.2016 | Rheinische Friedrich-Wilhelms-Universität Bonn
New leukemia treatment offers hope
23.09.2016 | King Abdullah University of Science and Technology
Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of light metals.
Scientists at the University of Stuttgart have now developed two new process variants that will considerably expand the areas of application for friction stir welding.
Technologie-Lizenz-Büro (TLB) GmbH supports the University of Stuttgart in patenting and marketing its innovations.
Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of...
Optical quantum computers can revolutionize computer technology. A team of researchers led by scientists from Münster University and KIT now succeeded in putting a quantum optical experimental set-up onto a chip. In doing so, they have met one of the requirements for making it possible to use photonic circuits for optical quantum computers.
Optical quantum computers are what people are pinning their hopes on for tomorrow’s computer technology – whether for tap-proof data encryption, ultrafast...
The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.
“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...
With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.
Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...
For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.
Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...
28.09.2016 | Event News
27.09.2016 | Event News
23.09.2016 | Event News
28.09.2016 | Earth Sciences
28.09.2016 | Power and Electrical Engineering
28.09.2016 | Event News