Quantum marbles in a bowl of light

an artistic illustration of a matter wave rolling down a steep potential hill.
Image: Enrique Sahagún – Scixel

An international study shows which factors determine the speed limit for quantum computations.

Which factors determine how fast a quantum computer can perform its calculations? Physicists at the University of Bonn and the Technion – Israel Institute of Technology have devised an elegant experiment to answer this question. The results of the study are published in the journal Science Advances.

Quantum computers are highly sophisticated machines that rely on the principles of quantum mechanics to process information. This should enable them to handle certain problems in the future that are completely unsolvable for conventional computers. But even for quantum computers, fundamental limits apply to the amount of data they can process in a given time.

Quantum gates require a minimum time

The information stored in conventional computers can be thought of as a long sequence of zeros and ones, the bits. In quantum mechanics it is different: The information is stored in quantum bits (qubits), which resemble a wave rather than a series of discrete values. Physicists also speak of wave functions when they want to precisely represent the information contained in qubits.

In a traditional computer, information is linked together by so-called gates. Combining several gates allows elementary calculations, such as the addition of two bits. Information is processed in a very similar way in quantum computers, where quantum gates change the wave function according to certain rules.

Quantum gates resemble their traditional relatives in another respect: “Even in the quantum world, gates do not work infinitely fast,” explains Dr. Andrea Alberti of the Institute of Applied Physics at the University of Bonn. “They require a minimum amount of time to transform the wave function and the information this contains.”

More than 70 years ago, Soviet physicists Leonid Mandelstam and Igor Tamm deduced theoretically this minimum time for transforming the wave function. Physicists at the University of Bonn and the Technion have now investigated this Mandelstam-Tamm limit for the first time with an experiment on a complex quantum system. To do this, they used cesium atoms that moved in a highly controlled manner. “In the experiment, we let individual atoms roll down like marbles in a light bowl and observe their motion,” explains Alberti, who led the experimental study.

Atoms can be described quantum mechanically as matter waves. During the journey to the bottom of the light bowl, their quantum information changes. The researchers now wanted to know when this “deformation” could be identified at the earliest. This time would then be the experimental proof of the Mandelstam-Tamm limit. The problem with this, however, is: that in the quantum world, every measurement of the atom’s position inevitably changes the matter wave in an unpredictable way. So it always looks like the marble has deformed, no matter how quickly the measurement is made. “We therefore devised a different method to detect the deviation from the initial state,” Alberti says.

For this purpose, the researchers began by producing a clone of the matter wave, in other words an almost exact twin. “We used fast light pulses to create a so-called quantum superposition of two states of the atom,” explains Gal Ness, a doctoral student at the Technion and first author of the study. “Figuratively speaking, the atom behaves as if it had two different colors at the same time.” Depending on the color, each atom twin takes a different position in the light bowl: One is high up on the edge and “rolls” down from there. The other, conversely, is already at the bottom of the bowl. This twin does not move – after all, it cannot roll up the walls and so does not change its wave function.

The physicists compared the two clones at regular intervals. They did this using a technique called quantum interference, which allows differences in waves to be detected very precisely. This enabled them to determine after what time a significant deformation of the matter wave first occurred.

Two factors determine the speed limit

By varying the height above the bottom of the bowl at the start of the experiment, the physicists were also able to control the average energy of the atom. Average because, in principle, the amount cannot be determined exactly. The “position energy” of the atom is therefore always uncertain. “We were able to demonstrate that the minimum time for the matter wave to change depends on this energy uncertainty,” says Professor Yoav Sagi, who led the partner team at Technion: “The greater the uncertainty, the shorter the Mandelstam-Tamm time.”

This is exactly what the two Soviet physicists had predicted. But there was also a second effect: If the energy uncertainty was increased more and more until it exceeded the average energy of the atom, then the minimum time did not decrease further – contrary to what the Mandelstam-Tamm limit would actually suggest. The physicists thus proved a second speed limit, which was theoretically discovered about 20 years ago. The ultimate speed limit in the quantum world is therefore determined not only by the energy uncertainty, but also by the mean energy.

“It is the first time that both quantum speed boundaries could be measured for a complex quantum system, and even in a single experiment,” Alberti enthuses. Future quantum computers may be able to solve problems rapidly, but they too will be constrained by these fundamental limits.

Funding:

The study was funded by the Reinhard Frank Foundation (in collaboration with the German Technion Society), the German Research Foundation (DFG), the Helen Diller Quantum Center at the Technion, and the German Academic Exchange Service (DAAD).

Publication: Gal Ness, Manolo R. Lam, Wolfgang Alt, Dieter Meschede, Yoav Sagi and Andrea Alberti: Observing crossover between quantum speed limits; Science Advances; DOI: https://dx.doi.org/10.1126/sciadv.abj9119

Contact:

Dr. Andrea Alberti
Institut für Angewandte Physik (IAP)
Universität Bonn
Tel. +49-228/73-3471
E-Mail: alberti@iap.uni-bonn.de

Journal: Science Advances
DOI: 10.1126/sciadv.abj9119
Method of Research: Experimental study
Subject of Research: Not applicable
Article Title: Observing crossover between quantum speed limits
Article Publication Date: 22-Dec-2021

Media Contact

Johannes Seiler
University of Bonn
j.seiler@uni-bonn.de
Office: 0049-228-734-728

Expert Contact

Dr. Andrea Alberti
University of Bonn
alberti@iap.uni-bonn.de
Office: +49-228-733471

Media Contact

Johannes Seiler
University of Bonn

All latest news from the category: Physics and Astronomy

This area deals with the fundamental laws and building blocks of nature and how they interact, the properties and the behavior of matter, and research into space and time and their structures.

innovations-report provides in-depth reports and articles on subjects such as astrophysics, laser technologies, nuclear, quantum, particle and solid-state physics, nanotechnologies, planetary research and findings (Mars, Venus) and developments related to the Hubble Telescope.

Back to home

Comments (0)

Write a comment

Newest articles

World’s smallest molecular machine

… reversible sliding motion in ammonium-linked ferrocene. Researchers stabilized ferrocene molecules on a flat substrate for the first time, creating an electronically controllable sliding molecular machine. Artificial molecular machines, nanoscale…

Towards the control of chemical reactions

Overcoming one of the challenges of quantum mechanics: A major result in quantum mechanics has been achieved: for the first time, the temporal evolution of a quantum system has been…

Planets form through domino effect

New radio astronomy observations of a planetary system in the process of forming show that once the first planets form close to the central star, these planets can help shepherd…