Science has known about plant hormones since Charles Darwin experimented with plant shoots and showed that the shoots bend toward the light as long as their tips, which are secreting a growth hormone, aren’t cut off.
But it is only recently that scientists have begun to put a molecular face on the biochemical systems that modulate the levels of plant hormones to defend the plant from herbivore or pathogen attack or to allow it to adjust to changes in temperature, precipitation or soil nutrients.
Now, a cross-Atlantic collaboration between scientists at Washington University in St. Louis, and the European Synchrotron Radiation Facility and the European Molecular Biology Laboratory, both in Grenoble, France, has revealed the workings of a switch that activates plant hormones, tags them for storage or marks them for destruction.
The research appeared online in the May 24 issue of Science Express and will be published in a forthcoming issue of Science.
“The enzymes are cellular stop/go switches that turn hormone responses on and off,” says Joseph Jez, PhD, associate professor of biology in Arts & Sciences at WUSTL and senior author on the paper.
The research is relevant not just to design of herbicides — some of which are synthetic plant hormones — but also to the genetic modification of plants to suit more extreme growing conditions due to unchecked climate change.
What plant hormones do
Plants can seem pretty defenseless. After all, they can’t run from the weed whacker or move to the shade when they’re wilting, and they don’t have teeth, claws, nervous systems, immune systems or most of the other protective equipment that comes standard with an animal chassis.
But they do make hormones. Or to be precise — because hormones are often defined as chemicals secreted by glands and plants don’t have glands — they make chemicals that in very low concentrations dramatically alter their development, growth or metabolism. In the original sense of the word “hormone,” which is Greek for impetus, they stir up the plant.
In plants as in animals, hormones control growth and development. For example, the auxins, one group of plant hormones, trigger cell division, stem elongation and differentiation into roots, shoots and leaves. The herbicide 2,4-D is a synthetic auxin that kills broadleaf plants, such as dandelions or pigweed, by forcing them to grow to the point of exhaustion.
Asked for his favorite example of a plant hormone, Corey S. Westfall brings up its chemical defense systems. Westfall, a graduate student in the Jez laboratory, who together with Chloe Zubieta, PhD, a staff scientist at the European Synchrotron Radiation Facility did most of the work on the research.
Walking through a public park in St. Louis near WUSTL, Westfall often sees oak leaves with brown spots on them. The spots are cells that have deliberately committed cell suicide to deny water and nutrients to a pathogen that landed in the center of the spot. This form of self-sterilization is triggered by the plant hormone salicylic acid.
Westfall also mentions the jasmonates, which cause plants to secrete compounds such as tannins that discourage herbivores. Tannins are toxic to insects because they bind to salivary proteins and inactivate them. So insects that ingest lots of tannins fail to gain weight and may eventually die.
A little more, a little less
Hormones, in other words, allow plants to respond quickly and sometimes dramatically to developmental cues and environmental stresses. But in order to respond appropriately, plants have to be able to sensitively control the level and activity of the hormone molecules.
The Science paper reveals a key control mechanism: a family of enzymes that attach amino acids to hormone molecules to turn the hormones on or off. Depending on the hormone and the amino acid, the reaction can activate the hormone, put it in storage or mark it for destruction.
For example, in the model plant, thale cress, fewer than 5 percent of the auxins are found in the active free-form. Most are conjugated (attached) to amino acids and inactive, constituting a pool of molecules that can be quickly converted to the active free form.
The attachment of amino acids is catalyzed by a large family of enzymes (proteins) called the GH3s, which probably originated 400 million years ago, before the evolution of land plants. The genes diversified over time: there are only a few in mosses, but 19 in thale cress and more than 100 in total.
“Nature finds things that works and sticks with them,” Jez says. The GH3s, he says, are a remarkable example of gene family expansion to suit multiple purposes.
A swiveling hormone modification machine
The first GH3 gene — from soybean — was sequenced in 1984. But gene (or protein) sequences reveal little about what proteins do and how they do it. To understand function, the scientists had to figure out how these enzymes, which start out as long necklaces of amino acids, fold into knobbly globules with protective indentations for chemical reactions.
Unfortunately, protein folding is a notoriously hard problem, one as yet beyond the reach of computer calculations at least as a matter of routine. So most protein structures are still solved by the time-intensive process of crystallizing the protein and bombarding the crystal with X-rays to locate the atoms within it. Both the Jez lab and the Structural Biology Group at European Synchrotron Radiation Facility specialize in protein crystallization.
By good fortune, the scientists were able to freeze the enzymes in two different conformations. This information and that gleaned by mutating the amino acids lining the enzyme’s active site let them piece together what the enzymes were doing.
It turned out that the GH3 enzymes, which fold into a shape called a hammer and anvil, cataylze a two-step chemical reaction. In the first step, the enzyme’s active site is open allowing ATP (adenosine triphosphate, the cell’s energy storage molecule) and the free acid form of the plant hormone to enter.
Once the molecules are bound, the enzyme strips phosphate groups off the ATP molecule to form AMP and sticks the AMP onto an “activated” form of the hormone, a reaction called adenylation.
Adenylation triggers part of the enzyme to rotate over the active site, preparing it to catalyze the second reaction, in which an amino acid is snapped onto the hormone molecule. This is called a transferase reaction.
“After you pop off the two phosphates,” Jez says, “the top of the molecule ratchets in and sets up a completely different active site. We were lucky enough to capture that crystallographically because we caught the enzyme in both positions.”
The same basic two-step reaction can either activate or inactivate a hormone molecule. Addition of the amino acid isoleucine to a jasmonate, for example, makes the jasmonate hormone bioactive. On the other hand addition of the amino acid aspartate to the auxin known as IAA marks it for destruction.
This is the first time any GH3 structure has been solved.
Plant breeding in a hurry
Understanding the powerful plant hormone systems will give scientists a much faster and more targeted way to breed and domesticate plant species, speed that will be needed to keep up with the rapid shift of plant growing zones.
Plant hormones, like animal hormones, typically affect the transcription of many genes and so have multiple effects, some desirable and others undesirable. But GH3 mutants provide a tantalizing glimpse of what might be possible: some are resistant to bacterial pathogens, others to fungal pathogens and some are exceptionally drought tolerant.
Westfall mentions that in 2003, a scientist at Purdue University figured out that a corn strain that had a short stalk but normal ears and tassels had a mutation that interferes with the flow of the hormone auxin in the plant.
Because the plants are so much smaller, they are relatively drought resistant and might be able to grow in India, where North American corn varieties cannot survive. Similar high-yield dwarf varieties might prevent famine in areas of the world where many people are at risk of starvation.
Diana Lutz | EurekAlert!
Rising water temperatures could endanger the mating of many fish species
03.07.2020 | Alfred-Wegener-Institut, Helmholtz-Zentrum für Polar- und Meeresforschung
Moss protein corrects genetic defects of other plants
03.07.2020 | Rheinische Friedrich-Wilhelms-Universität Bonn
Solar cells based on perovskite compounds could soon make electricity generation from sunlight even more efficient and cheaper. The laboratory efficiency of these perovskite solar cells already exceeds that of the well-known silicon solar cells. An international team led by Stefan Weber from the Max Planck Institute for Polymer Research (MPI-P) in Mainz has found microscopic structures in perovskite crystals that can guide the charge transport in the solar cell. Clever alignment of these "electron highways" could make perovskite solar cells even more powerful.
Solar cells convert sunlight into electricity. During this process, the electrons of the material inside the cell absorb the energy of the light....
Empa researchers have succeeded in applying aerogels to microelectronics: Aerogels based on cellulose nanofibers can effectively shield electromagnetic radiation over a wide frequency range – and they are unrivalled in terms of weight.
Electric motors and electronic devices generate electromagnetic fields that sometimes have to be shielded in order not to affect neighboring electronic...
A promising operating mode for the plasma of a future power plant has been developed at the ASDEX Upgrade fusion device at Max Planck Institute for Plasma...
Live event – July 1, 2020 - 11:00 to 11:45 (CET)
"Automation in Aerospace Industry @ Fraunhofer IFAM"
The Fraunhofer Institute for Manufacturing Technology and Advanced Materials IFAM l Stade is presenting its forward-looking R&D portfolio for the first time at...
With an X-ray experiment at the European Synchrotron ESRF in Grenoble (France), Empa researchers were able to demonstrate how well their real-time acoustic monitoring of laser weld seams works. With almost 90 percent reliability, they detected the formation of unwanted pores that impair the quality of weld seams. Thanks to a special evaluation method based on artificial intelligence (AI), the detection process is completed in just 70 milliseconds.
Laser welding is a process suitable for joining metals and thermoplastics. It has become particularly well established in highly automated production, for...
02.07.2020 | Event News
19.05.2020 | Event News
07.04.2020 | Event News
03.07.2020 | Life Sciences
03.07.2020 | Studies and Analyses
03.07.2020 | Power and Electrical Engineering