Microplastics transport metallic pollutants: pursuing the Trojan horse

The different materials range in size from several millimetres (larger particles) to less than 100 micrometres. The shape of the particles themselves is not important for the new method. HZG/Lars Hildebrandt

Microplastics in the environment are viewed as a global problem from more than one angle: on the one hand, laboratory tests have shown that the plastic particles can be toxic, while on the other, particles can serve as a vehicle for the transport of pollutants in the environment.

The latter is due to the chemical and physical properties of the microplastics: for example, some pollutants found in rivers or in seawater can accumulate in plastic. Others are already contained within the particles from the manufacturing process so they can carry an entire cocktail of varying substances.

This is what the scientists refer to as the “Trojan horse effect”. There have been so far very few scientifically reliable studies on the type and number of metals accumulating in plastic that are relevant in terms of environmental toxicology.

Researchers from the Helmholtz-Zentrum Geesthacht (HZG), the German Federal Institute of Hydrology (BfG) and Christian Albrechts University in Kiel (CAU) have now presented in the scientific journal PLOS ONE a validated microwave-assisted method with which the most important types of plastics can be studied in regard to the metals they can contain.

Fifty different metals measured in microplastic particles

“The basis for reliable scientific determination of metal pollutant transport by microplastics is through validated laboratory methods,” says Lars Hildebrandt, the study’s first author and doctoral candidate in the HZG’s department for Marine Bioanalytical Chemistry. “The new methods can now quantify over fifty different metals in microplastic particles.”

For their measurements, Hildebrandt’s team used certified plastic reference materials in the microplastic size range up to five millimetres. With these materials, the scientists know exactly which metals are contained in the materials due to the production process and should therefore appear in the results.

The researchers treated the materials with various combinations of strong acids and heated them with microwave radiation until the respective material completely dissolved. In this way, they were able to determine a suitable acid mixture with which all examined materials are reliably dissolved.

The samples were then studied using a mass spectrometer. Which elements and what quantities contained in the sample could then be verified.

Metals detectable from plastic production and the environment

In the microplastic particles the new method can be utilized to detect both the metals used in plastic production and those that can bind to the particles from the environment, such as from seawater. For example, the metalloid antimony is often used as a catalyst for the production of PET and can therefore be found in the plastic itself. Heavy metals such as cadmium and lead, which are toxic for many organisms, can also be present from the production process, but can also be bound to the surface of the particles from the environment.

The approach presented in the study was used just recently to track metal-labelled nanoplastic particles in a test system (see publication listed under “Further Information”).

In the next step, the scientists now plan a targeted deployment of microplastic samples in the Elbe estuary and at specific points in the river. Containers are to be placed on a rack, which in simplified terms can be thought of as specialized tea eggs, which contain the sample material.

“What interests us is which metals from the water bind to the surface of the plastic, something scientists refer to in this context as 'sorption’.” We will then take samples at regular intervals in order to measure the concentrations in the plastic with our new method and thus investigate the accumulation over time,” explains chemist Hildebrandt on the future outlook.

Lars Hildebrandt
Institute of Coastal Research / Department of Marine Bioanalytical Chemistry
Helmholtz-Zentrum Geesthacht
Tel: +49 (0)4152 87-1813

Dr. rer. nat. Daniel Pröfrock
Head of the department
Institute of Coastal Research / Department of Marine Bioanalytical Chemistry
Helmholtz-Zentrum Geesthacht
Tel: +49 (0)4152 87-2846

Hildebrandt L, von der Au M, Zimmermann T, Reese A, Ludwig J, Pröfrock D (2020) A metrologically traceable protocol for the quantification of trace metals in different types of microplastic. PLoS ONE 15(7): e0236120. https://journals.plos.org/plosone/article?id=10.1371/journal.pone.0236120

https://www.hzg.de Website of Helmholtz-Zentrum Geesthacht
https://www.frontiersin.org/articles/10.3389/fenvs.2020.00089/full Hildebrandt L, Mitrano DM, Zimmermann T and Pröfrock D (2020) A Nanoplastic Sampling and Enrichment Approach by Continuous Flow Centrifugation. Front. Environ. Sci. 8:89. doi: 10.3389/fenvs.2020.00089

Media Contact

Dr. Torsten Fischer idw - Informationsdienst Wissenschaft

All latest news from the category: Ecology, The Environment and Conservation

This complex theme deals primarily with interactions between organisms and the environmental factors that impact them, but to a greater extent between individual inanimate environmental factors.

innovations-report offers informative reports and articles on topics such as climate protection, landscape conservation, ecological systems, wildlife and nature parks and ecosystem efficiency and balance.

Back to home

Comments (0)

Write a comment

Newest articles

Photonic chip integrates sensing and computing for ultrafast machine vision

Technology eliminates optical-electronic conversions, holds promise for revolutionizing edge intelligence. Researchers have demonstrated a new intelligent photonic sensing-computing chip that can process, transmit and reconstruct images of a scene within…

Pair plasmas found in deep space can now be generated in the lab

An international team of scientists has developed a novel way to experimentally produce plasma ‘fireballs’ on Earth. Black holes and neutron stars are among the densest known objects in the…

New fabric makes urban heat islands more bearable

With applications in clothing, construction and food storage, the new textile reduces heat from both the sun and thermal radiation from nearby buildings. This year has already seen massive heatwaves…

Partners & Sponsors