NREL Survey Shows Dramatic Improvement in B100 Biodiesel Quality

The ASTM standards serve as guidelines for industry and are designed to ensure quality at the pump for consumers – along with reliable operation of the nation’s vehicles powered by biodiesel blends.

“The survey showed a major improvement over results from previous years,” NREL Senior Chemist Teresa Alleman said. “In our 2007 survey of B100 biodiesel, less than half of the samples met quality specifications. More stringent quality requirements, along with the voluntary BQ-9000 quality management program, are among the reasons for this marked improvement.”

B100 is not commonly used as a fuel, but is blended with petroleum diesel, typically in blends up to 20%, and has been part of the industry's steady growth in the past decade. B100 production increased from 27.9 million gallons in 2004 to more than 1 billion gallons in 2012.

For the most recent survey conducted from August 2011 to February 2012, NREL researchers collected fuel samples from 53 producers and 14 terminals from across the United States. Terminals from the East and West Coasts, the Rocky Mountain region, and the Midwest were tested for a range of critical properties, such as free and total glycerin content, metals content, and cloud point that could have an immediate impact on operability.

To ensure product quality, ASTM published the first B100 quality standards in 2002. ASTM International does not enforce fuel quality, but it is a leader in the development and delivery of international voluntary consensus standards. Its specifications are frequently adopted by state and local governments to ensure fuel quality and are monitored by industry members. NREL is among the organizations participating in the development of standards.

The anonymous data from the NREL study “Quality Parameters and Chemical Analysis for Biodiesel Produced in the United States in 2011” are in publication and available on NREL’s website for use by interested parties.

NREL is the U.S. Department of Energy's primary national laboratory for renewable energy and energy efficiency research and development. NREL is operated for DOE by the Alliance for Sustainable Energy, LLC.

Media Contact

David Glickson EurekAlert!

More Information:

http://www.nrel.gov

All latest news from the category: Power and Electrical Engineering

This topic covers issues related to energy generation, conversion, transportation and consumption and how the industry is addressing the challenge of energy efficiency in general.

innovations-report provides in-depth and informative reports and articles on subjects ranging from wind energy, fuel cell technology, solar energy, geothermal energy, petroleum, gas, nuclear engineering, alternative energy and energy efficiency to fusion, hydrogen and superconductor technologies.

Back to home

Comments (0)

Write a comment

Newest articles

Recovering phosphorus from sewage sludge ash

Chemical and heat treatment of sewage sludge can recover phosphorus in a process that could help address the problem of diminishing supplies of phosphorus ores. Valuable supplies of phosphorus could…

Efficient, sustainable and cost-effective hybrid energy storage system for modern power grids

EU project HyFlow: Over three years of research, the consortium of the EU project HyFlow has successfully developed a highly efficient, sustainable, and cost-effective hybrid energy storage system (HESS) that…

After 25 years, researchers uncover genetic cause of rare neurological disease

Some families call it a trial of faith. Others just call it a curse. The progressive neurological disease known as spinocerebellar ataxia 4 (SCA4) is a rare condition, but its…

Partners & Sponsors