These facts and figures, including the current status of healthcare systems across the continent, were included in the EHRA White Book2.
"This document is intended to be the starting point in a move towards a homogeneous way of looking at data, resources, physicians, etc., across Europe. Comparison among the countries belonging to the European Society of Cardiology (ESC)3, should help to standardise health resources by promoting knowledge of the status and bringing it to the attention of all public authorities" explained Christian Wolpert, Chairman of the National Societies who contributed the information gathered in the White Book.
"One of the roles of a European Association like the European Heart Rhythm Association (EHRA), a registered branch of the European Society of Cardiology (ESC), is to promote equal access to therapy for all patients across Europe. To do so, the first step is to compile data on the current situation in various ESC membership countries, compare them, and propose actions to move towards harmonization. The current leadership of EHRA agreed on the importance of obtaining as much current information as possible concerning the situation of the practice of electrophysiology in Europe" stressed Wolpert.
Under the leadership of Professors Christian Wolpert from Germany, Panos Vardas from Greece and Josep Brugada from Spain, a group worked to collect the most recent figures. To ensure up to date data, Presidents of the different Working Groups and National Societies were contacted and asked not only to provide data, but also to verify and authorize all the information that became available through various sources.
Wolpert declared that this data is also the point of comparison for the future: " By knowing where we are today, we will be able to benchmark in the future and see how diverse countries evolve. This means that this book must be an ongoing process, with updated information, new and additional data, and the inclusion of information from those countries that have not yet been able to collect and transmit their records."
Explaining the data, Prof Wolpert highlighted certain trends, such as the fact that "more and more, cardiologists represent the majority of implanters while surgeons are decreasingly active in these procedures."
There is a disparate coverage of diseases and treatments within the European Union and the European Society of Cardiology member countries outside of the EU. Some of the countries have no reimbursement e.g. for ICD or pacemaker therapy and the penetration of catheter ablation of atrial fibrillation is very different. Data shows big differences across ESC member countries in:
The number of trained physicians and specialised centres
The number of implantations which seems to depend not only on reimbursement and financial resources, but also to be a function of the number of centres and physicians dedicated to electrophysiology and implantation of devices.
The numbers of ICD implanting centres range from less than 1 to 6.87 per million citizens.
Pacemaker therapy is performed in the range of 88 to a maximum of around 1200/ million inhabitants.
ICD implant rates including CRT-D devices range from approx. 2.5 to 354 per million inhabitants. The data shows an increase for a subset of 16 western and northern European countries around 15% from 2006 to 2007.
Regarding a potentially different medical consensus in specific countries the use of biventricular pacemakers vs. biventricular ICDs shows a 8:1 ratio at the highest down to 1:1.2 ratio as the lowest.
In the field of invasive electrophysiology and catheter ablation for supraventricular and ventricular arrhythmias the number of centres available is variable ranging from less than 0.2 to more than 3 centres/ million. The total number of catheter ablations is increasing and reaches a maximum of more than 200/ million in approx. half of the countries. However, there is a strong discrepancy comparing all 35 countries, displaying a wide range from less than 20 to more than 450/ million.
The same is true for catheter ablation of atrial fibrillation which varies tremendously, linked to reimbursement policies but also to different approaches in the various EP societies.
"As an example, Germany, hosting the EUROPACE meeting this year, has one of the highest implant rates for ICD's in Europe with a total of 1037 centres which implant pacemakers; 200 centres implanting CRT resynchronisation devices and a total of 360 ICD implanting institutions" highlights Prof Wolpert.
"Within the Non-EU ESC member countries, there has been a steady increase of therapy availability and disease coverage, however, there are still many countries that struggle with reimbursement, trained personnel and technical support, which requires a strong effort and leaves much space for improvement. It is the task and the intention of EHRA to support any initiative to improve steadily the situation for these countries in order to reduce the disparities".
The first EHRA White Book was published in 2008 containing information for 2006 and 2007 from 35 of the 51 ESC member countries from all sites of Europe and parts of the Middle East. The book was made fully available to the public in an electronic version and within short time it became one of the most popular downloads in the EHRA website.
"We hope that this book will be useful to all electrophysiologists and health care providers in Europe and will initiate an era of evolution towards a more unified Europe in terms of equal access to therapy for all patients, regardless of their country origin", concluded Prof Wolpert.
ESC Press Office | EurekAlert!
A promising target for kidney fibrosis
21.04.2017 | Brigham and Women's Hospital
Stem cell transplants: activating signal paths may protect from graft-versus-host disease
20.04.2017 | Technische Universität München
More and more automobile companies are focusing on body parts made of carbon fiber reinforced plastics (CFRP). However, manufacturing and repair costs must be further reduced in order to make CFRP more economical in use. Together with the Volkswagen AG and five other partners in the project HolQueSt 3D, the Laser Zentrum Hannover e.V. (LZH) has developed laser processes for the automatic trimming, drilling and repair of three-dimensional components.
Automated manufacturing processes are the basis for ultimately establishing the series production of CFRP components. In the project HolQueSt 3D, the LZH has...
Reflecting the structure of composites found in nature and the ancient world, researchers at the University of Illinois at Urbana-Champaign have synthesized thin carbon nanotube (CNT) textiles that exhibit both high electrical conductivity and a level of toughness that is about fifty times higher than copper films, currently used in electronics.
"The structural robustness of thin metal films has significant importance for the reliable operation of smart skin and flexible electronics including...
The nearby, giant radio galaxy M87 hosts a supermassive black hole (BH) and is well-known for its bright jet dominating the spectrum over ten orders of magnitude in frequency. Due to its proximity, jet prominence, and the large black hole mass, M87 is the best laboratory for investigating the formation, acceleration, and collimation of relativistic jets. A research team led by Silke Britzen from the Max Planck Institute for Radio Astronomy in Bonn, Germany, has found strong indication for turbulent processes connecting the accretion disk and the jet of that galaxy providing insights into the longstanding problem of the origin of astrophysical jets.
Supermassive black holes form some of the most enigmatic phenomena in astrophysics. Their enormous energy output is supposed to be generated by the...
The probability to find a certain number of photons inside a laser pulse usually corresponds to a classical distribution of independent events, the so-called...
Microprocessors based on atomically thin materials hold the promise of the evolution of traditional processors as well as new applications in the field of flexible electronics. Now, a TU Wien research team led by Thomas Müller has made a breakthrough in this field as part of an ongoing research project.
Two-dimensional materials, or 2D materials for short, are extremely versatile, although – or often more precisely because – they are made up of just one or a...
20.04.2017 | Event News
18.04.2017 | Event News
03.04.2017 | Event News
25.04.2017 | Physics and Astronomy
25.04.2017 | Materials Sciences
25.04.2017 | Life Sciences