Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

A 'shrimp cocktail' to fuel cars and trucks

31.07.2009
Call it a "shrimp cocktail" for your fuel tank. Scientists in China are reporting development of a catalyst made from shrimp shells that could transform production of biodiesel fuel into a faster, less expensive, and more environmentally friendly process. Their study is scheduled for the Aug. 20 issue of ACS' Energy & Fuels, a bi-monthly journal.

Xinsheng Zheng and colleagues note that an energy-hungry world, concerned about global warming, increasingly puts its future fuel hopes on renewable fuels like biodiesel.

Today's biodiesel production processes, however, require catalysts to speed up the chemical reactions that transform soybean, canola, and other plant oils into diesel fuel. Traditional catalysts cannot be reused and must be neutralized with large amounts of water — another increasingly scarce resource — leaving behind large amounts of polluted wastewater.

The researchers describe development of a new catalyst produced from shrimp shells. In laboratory tests, the shrimp shell catalysts converted canola oil to biodiesel (89 percent conversion in three hours) faster and more efficiently than some conventional catalysts. The new catalysts also can be reused and the process minimizes waste production and pollution, the scientists note.

ARTICLE #4 FOR IMMEDIATE RELEASE
"Shrimp Shell Catalyst for Biodiesel Production"
DOWNLOAD FULL TEXT ARTICLE: http://pubs.acs.org/stoken/presspac/presspac/full/10.1021/ef900273y
CONTACT:
Xinsheng Zheng, Ph.D.
Department of Chemistry
College of Science
Hua Zhong Agriculture University
Wuhan, China 430070
Phone: 86-27-87281187
Fax: 86-27-87282133
Email: xszheng@mail.hzau.edu.cn

Michael Woods | EurekAlert!
Further information:
http://www.acs.org

More articles from Life Sciences:

nachricht Decoding the genome's cryptic language
27.02.2017 | University of California - San Diego

nachricht New risk factors for anxiety disorders
24.02.2017 | Julius-Maximilians-Universität Würzburg

All articles from Life Sciences >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Safe glide at total engine failure with ELA-inside

On January 15, 2009, Chesley B. Sullenberger was celebrated world-wide: after the two engines had failed due to bird strike, he and his flight crew succeeded after a glide flight with an Airbus A320 in ditching on the Hudson River. All 155 people on board were saved.

On January 15, 2009, Chesley B. Sullenberger was celebrated world-wide: after the two engines had failed due to bird strike, he and his flight crew succeeded...

Im Focus: Breakthrough with a chain of gold atoms

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

Im Focus: DNA repair: a new letter in the cell alphabet

Results reveal how discoveries may be hidden in scientific “blind spots”

Cells need to repair damaged DNA in our genes to prevent the development of cancer and other diseases. Our cells therefore activate and send “repair-proteins”...

Im Focus: Dresdner scientists print tomorrow’s world

The Fraunhofer IWS Dresden and Technische Universität Dresden inaugurated their jointly operated Center for Additive Manufacturing Dresden (AMCD) with a festive ceremony on February 7, 2017. Scientists from various disciplines perform research on materials, additive manufacturing processes and innovative technologies, which build up components in a layer by layer process. This technology opens up new horizons for component design and combinations of functions. For example during fabrication, electrical conductors and sensors are already able to be additively manufactured into components. They provide information about stress conditions of a product during operation.

The 3D-printing technology, or additive manufacturing as it is often called, has long made the step out of scientific research laboratories into industrial...

Im Focus: Mimicking nature's cellular architectures via 3-D printing

Research offers new level of control over the structure of 3-D printed materials

Nature does amazing things with limited design materials. Grass, for example, can support its own weight, resist strong wind loads, and recover after being...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Booth and panel discussion – The Lindau Nobel Laureate Meetings at the AAAS 2017 Annual Meeting

13.02.2017 | Event News

Complex Loading versus Hidden Reserves

10.02.2017 | Event News

International Conference on Crystal Growth in Freiburg

09.02.2017 | Event News

 
Latest News

New pop-up strategy inspired by cuts, not folds

27.02.2017 | Materials Sciences

Sandia uses confined nanoparticles to improve hydrogen storage materials performance

27.02.2017 | Interdisciplinary Research

Decoding the genome's cryptic language

27.02.2017 | Life Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>