Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Big ice may explain Mars’ double-layer craters

06.08.2013
Brown planetary geologists have an explanation for the formation of more than 600 “double-layer ejecta” (DLE) craters on Mars. The Martian surface was covered with a thick sheet of ice at impact. Ejected material would later slide down steep crater sides and across the ice, forming a second layer.

Geologists from Brown University have developed a promising new explanation for a mysterious type of crater on the surface on Mars.


An odd type of crater
Double-layer ejecta craters could form when ejected material slides down steep crater walls and across ice, forming a top layer. Striations, common in landslides on Earth, radiate out from the crater rim. Credit: NASA

Double-layered ejecta craters or DLEs, like other craters, are surrounded by debris excavated by an impactor. What makes DLEs different is that the debris forms two distinct layers — a large outer layer with a smaller inner layer sitting on top. These distinctive craters were first documented in data returned from the Viking missions to Mars in the 1970s, and scientists have been trying ever since to figure out how the double-layer pattern forms.

A new study by Brown graduate student David Kutai Weiss and James W. Head, professor of geological science, suggests that DLEs are the result of impacts onto a surface that was covered by a layer of glacial ice tens of meters thick.

“Recent discoveries by planetary geoscientists at Brown and elsewhere have shown that the climate of Mars has varied in the past,” Head said. “During these times, ice from the polar caps is redistributed into the mid-latitudes of Mars as a layer about 50 meters thick, in the same place that we see that the DLEs have formed. This made us think that this ice layer could be part of the explanation for the formation of the unusual DLE second layer,” Head said.

In the scenario Weiss and Head lay out, the impact blasts through the ice layer, spitting rock and other ejecta out onto the surrounding ice. But because that ejected material sits on slippery ice, it doesn’t all stay put. Weiss and Head believe the layering occurs when material near the top of an upraised crater rim slides down the slippery ice and overtops material on the lower slopes. That landslide, enabled by steep slopes and a slick ice layer, creates the DLEs’ telltale two-layered appearance.

“I think for the first time since DLEs were discovered in the 1970s we have a model for their formation that appears to be consistent with a very wide range of known data,” Weiss said. An understanding of how these and other crater types formed could help researchers to reconstruct the environmental conditions at the time of the impacts.

The research will be published in the journal Geophysical Research Letters. An early version of the paper went online on July 25.

A good fit to the data

The landslide scenario explains several of the distinct features of DLEs. Most directly, it explains radial striations — grooves radiating out from the crater rim — that are common on the inner ejecta layer of DLEs. Striations are common in landslides on Earth, Weiss said, “especially landslides on glaciers.”

That got Weiss and Head thinking that ice could be a key ingredient for making a DLE. Ice would reduce the coefficient of friction on the slopes of crater rims, increasing the likelihood of a slide. “When I did a quick calculation, I realized that the landslide wouldn't be expected to happen [on crater rims] unless the ejecta was landsliding on an ice layer,” Weiss said.

The scenario also requires a steep slope on the outside of a crater rim. A raised rim is partly a function of crater size, with larger craters generally having less uplift. Weiss calculated that craters larger than about 25 kilometers probably wouldn’t have steep enough rims to cause an icy landslide. With those results in hand, he surveyed about 600 known DLEs and found that nearly all of them are between one and 25 kilometers in diameter.

The ice model also accounts for other distinctive features of DLEs. For example, unlike other crater types, DLEs tend not to have secondary craters surrounding them. Secondary craters are the result of big chunks of ejecta blasted out of the main crater, leaving gouges in the surrounding surface when they land. But if that surrounding surface were covered by ice, evidence of shallow secondary craters would disappear when the ice disappeared.

The model also appears to explain the locations of DLEs at middle or high latitudes — areas where scientists believe there may once have been glacial ice on Mars.

Ultimately, understanding how DLEs and other crater types are formed could lead to a better understanding of Mars’ past.

“There are over 600 DLEs on the Martian surface, so reconciling how they formed with our knowledge of the climate of Mars is pretty important,” Weiss said. “It could tell us a lot about the history of the martian climate on a global scale.”

The work was supported by a NASA grant to Head.

Editors: Brown University has a fiber link television studio available for domestic and international live and taped interviews, and maintains an ISDN line for radio interviews. For more information, call (401) 863-2476.

Catherine Puckett | EurekAlert!
Further information:
http://www.usgs.gov

More articles from Earth Sciences:

nachricht Early organic carbon got deep burial in mantle
25.04.2017 | Rice University

nachricht New atlas provides highest-resolution imagery of the Polar Regions seafloor
25.04.2017 | British Antarctic Survey

All articles from Earth Sciences >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Making lightweight construction suitable for series production

More and more automobile companies are focusing on body parts made of carbon fiber reinforced plastics (CFRP). However, manufacturing and repair costs must be further reduced in order to make CFRP more economical in use. Together with the Volkswagen AG and five other partners in the project HolQueSt 3D, the Laser Zentrum Hannover e.V. (LZH) has developed laser processes for the automatic trimming, drilling and repair of three-dimensional components.

Automated manufacturing processes are the basis for ultimately establishing the series production of CFRP components. In the project HolQueSt 3D, the LZH has...

Im Focus: Wonder material? Novel nanotube structure strengthens thin films for flexible electronics

Reflecting the structure of composites found in nature and the ancient world, researchers at the University of Illinois at Urbana-Champaign have synthesized thin carbon nanotube (CNT) textiles that exhibit both high electrical conductivity and a level of toughness that is about fifty times higher than copper films, currently used in electronics.

"The structural robustness of thin metal films has significant importance for the reliable operation of smart skin and flexible electronics including...

Im Focus: Deep inside Galaxy M87

The nearby, giant radio galaxy M87 hosts a supermassive black hole (BH) and is well-known for its bright jet dominating the spectrum over ten orders of magnitude in frequency. Due to its proximity, jet prominence, and the large black hole mass, M87 is the best laboratory for investigating the formation, acceleration, and collimation of relativistic jets. A research team led by Silke Britzen from the Max Planck Institute for Radio Astronomy in Bonn, Germany, has found strong indication for turbulent processes connecting the accretion disk and the jet of that galaxy providing insights into the longstanding problem of the origin of astrophysical jets.

Supermassive black holes form some of the most enigmatic phenomena in astrophysics. Their enormous energy output is supposed to be generated by the...

Im Focus: A Quantum Low Pass for Photons

Physicists in Garching observe novel quantum effect that limits the number of emitted photons.

The probability to find a certain number of photons inside a laser pulse usually corresponds to a classical distribution of independent events, the so-called...

Im Focus: Microprocessors based on a layer of just three atoms

Microprocessors based on atomically thin materials hold the promise of the evolution of traditional processors as well as new applications in the field of flexible electronics. Now, a TU Wien research team led by Thomas Müller has made a breakthrough in this field as part of an ongoing research project.

Two-dimensional materials, or 2D materials for short, are extremely versatile, although – or often more precisely because – they are made up of just one or a...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Expert meeting “Health Business Connect” will connect international medical technology companies

20.04.2017 | Event News

Wenn der Computer das Gehirn austrickst

18.04.2017 | Event News

7th International Conference on Crystalline Silicon Photovoltaics in Freiburg on April 3-5, 2017

03.04.2017 | Event News

 
Latest News

NASA's Fermi catches gamma-ray flashes from tropical storms

25.04.2017 | Physics and Astronomy

Researchers invent process to make sustainable rubber, plastics

25.04.2017 | Materials Sciences

Transfecting cells gently – the LZH presents a GNOME prototype at the Labvolution 2017

25.04.2017 | Life Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>