Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Siemens solutions for integrated water resources management at the IWRM Karlsruhe

15.11.2012
On November 21 and 22 at the IWRM Congress in Karlsruhe, the Siemens Industry Automation Division will be presenting its portfolio for the planning, engineering and efficient operation of complex water management systems.

Showcased at the Siemens booth will be a range of high-performance solutions for water and waste water treatment facilities as well as desalination plants. The Congress will be focusing on issues surrounding the protection and sustainable utilization of water as a resource.



The growing global requirement for drinking water has triggered a continuing rise in the number of large and complex water treatment plants. Alongside new water and waste water treatment facilities, in many parts of the world the planning and implementation of desalination plants is also on the rise. Visitors to the exhibition staged alongside the IWRM Congress will have a chance to visit the Siemens booth to find out more about the concept of integrated engineering.

Integrated engineering offers operators an efficient solution encompassing not only the planning and engineering of new plants but also their subsequent automation. Plants of all different sizes and levels of complexity can be effectively planned and designed using the Comos engineering software.

Using a newly established interface, prepared engineering data can be transmitted directly to the Simatic PCS 7 process control system, substantially simplifying and speeding up the process of plant commissioning. The Comos engineering software solution also permits the selection and configuration of field devices.

The PIA Life Cycle Portal online configurator supports the simple selection and fault-free collation of device order numbers both quickly and accurately.

When it comes to rapid engineering of field devices across the whole life cycle of a plant – whether at the detail engineering, plant expansion or maintenance stage – the new interface to the PIA Life Cycle Portal makes available the necessary technical data.

With five keynote speeches as well as 15 workshops encompassing over 60 presentations, the IWRM 2012 will offer participants the opportunity to find out everything they could wish to know about water resources management. Together with the trade exhibition staged at the same time, the Conference is a key international information and communication platform for the water industry.

The German Federal Ministry of Education and Research will also be present at the event to report on its integrated water resources management-related activities. The IWRM 2012 will be rounded off by the presentation of the NEO Innovation Prize for outstanding work in research and innovation. With participants from more than 25 countries expected to attend this year’s event, the IWRM Karlsruhe 2012 creates the ideal link between science, practice and politics.

Siemens Sensors Environmental
www.siemens.com/environmental
Siemens Integrated Engineering
www.siemens.com/comos-pcs7

| Siemens Infrastructure
Further information:
http://www.siemens.com

More articles from Trade Fair News:

nachricht Complex hardmetal tools out of the 3D printer
21.09.2016 | Fraunhofer-Institut für Keramische Technologien und Systeme IKTS

nachricht Launch of New Industry Working Group for Process Control in Laser Material Processing
20.09.2016 | Fraunhofer-Institut für Lasertechnik ILT

All articles from Trade Fair News >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: OLED microdisplays in data glasses for improved human-machine interaction

The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.

“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...

Im Focus: Artificial Intelligence Helps in the Discovery of New Materials

With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.

Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...

Im Focus: Complex hardmetal tools out of the 3D printer

For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.

Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...

Im Focus: Launch of New Industry Working Group for Process Control in Laser Material Processing

At AKL’16, the International Laser Technology Congress held in May this year, interest in the topic of process control was greater than expected. Appropriately, the event was also used to launch the Industry Working Group for Process Control in Laser Material Processing. The group provides a forum for representatives from industry and research to initiate pre-competitive projects and discuss issues such as standards, potential cost savings and feasibility.

In the age of industry 4.0, laser technology is firmly established within manufacturing. A wide variety of laser techniques – from USP ablation and additive...

Im Focus: New laser joining technologies at ‘K 2016’ trade fair

Every three years, the plastics industry gathers at K, the international trade fair for plastics and rubber in Düsseldorf. The Fraunhofer Institute for Laser Technology ILT will also be attending again and presenting many innovative technologies, such as for joining plastics and metals using ultrashort pulse lasers. From October 19 to 26, you can find the Fraunhofer ILT at the joint Fraunhofer booth SC01 in Hall 7.

K is the world’s largest trade fair for the plastics and rubber industry. As in previous years, the organizers are expecting 3,000 exhibitors and more than...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Experts from industry and academia discuss the future mobile telecommunications standard 5G

23.09.2016 | Event News

ICPE in Graz for the seventh time

20.09.2016 | Event News

Using mathematical models to understand our brain

16.09.2016 | Event News

 
Latest News

Chains of nanogold – forged with atomic precision

23.09.2016 | Life Sciences

New leukemia treatment offers hope

23.09.2016 | Health and Medicine

Self-assembled nanostructures hit their target

23.09.2016 | Life Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>