Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

University of Oxford signs RFEL for initial signal processing study contract for ...

18.02.2014

... the Square Kilometre Array radio astronomy project

The University of Oxford, a member of the Low Frequency Aperture Array (LFAA) consortium, working together with the Square Kilometre Array (SKA) Organisation to build the world's largest radio telescope, has signed an initial study contract with RFEL. The contract covers the design of an FPGA-based signal processing architecture for the channelisation and beam forming functions in the antenna processing hardware.


Artist's composition of the 4 SKA instruments spread on the African (right of the image) and Australian (left of the image) continent.
Photo credit: SKA Organisation

Image downloadable from
https://www.skatelescope.org/wp-content/uploads/2013/12/SKAall_night1.full.jpg

RFEL, who specialises in high performance, electronic video and signal processing solutions, was selected because of the company's expertise in novel signal processing architectures and optimal VHDL coding that allows complex designs to "fit" into small FPGAs without compromising overall system performance. The SKA, which will be built over the next decade, will comprise of thousands of dish telescopes and hundreds of thousands of dipole antennas. Each of the dipole antennas will have two of these channelisers, to process the signals. It is therefore vital to keep the power requirements and costs of each processing card to a minimum.

The study involves the creation of a highly-configurable, fixed-point Matlab model, where channelisation parameters and beam forming strategies can be entered. Stimulus can then be presented to the model to allow the fidelity of performance to be monitored against immediate feedback of FPGA resource usage, and power dissipation for any given design configuration. RFEL is drawing on its years of work in this area of signal processing and its extensive Matlab and VHDL "module" library, to enable the SKA to achieve the maximum system performance matched to the FPGA cost and power dissipation limitations of such a large scientific instrument.

Alex Kuhrt, RFEL's CEO, announced, "We are delighted to have been awarded this contract. This is a highly prestigious, international project with around 100 organisations from 20 countries participating in the design and development. We will be able to draw on our previous work on solutions for radio telescopes, such as for the Max Planck Institute for Radio Astronomy."

The antennae will be located in Australia and Africa to form a radio telescope that spans two continents and a total collecting area of one square kilometre. Rather than just clustered in the central core regions, the telescopes will be arranged in multiple spiral arm configurations, with the antennae extending to vast distances from the central cores, creating what is known as a long baseline interferometer array. It will have an unprecedented scope in observations, exceeding the image resolution quality of the Hubble Space Telescope by a factor of 50 times, whilst also having the ability to image huge areas of sky ten times faster than any existing facilities.

The SKA will address fundamental unanswered questions about the Universe including how the first stars and galaxies formed after the big bang, how dark energy is accelerating the expansion of the Universe, the role of magnetism in the cosmos, the nature of gravity, and the search for life beyond Earth.

Artist's composition of the 4 SKA instruments spread on the African (right of the image) and Australian (left of the image) continent. 

Photo credit: SKA Organisation

Image downloadable from
https://www.skatelescope.org/wp-content/uploads/2013/12/SKAall_night1.full.jpg

In such an array, physical distance separates the telescopes, and the distance between them is calculated precisely using the time difference between the arrival of radio signals at each receiver. Computers can then calculate how to combine these signals to synthesise something the equivalent size of a single dish measuring the width of the distance between the two scopes. In doing so, these interferometry techniques enable astronomers to emulate a telescope with a size equal to the maximum separation between the telescopes in the array, or if needed, just the distance between a subset of telescopes, or indeed, multiple subsets of the main array. This way, rather than build one gigantic dish, the capabilities of one huge dish are in some ways surpassed by the flexibility that this interferometry configuration brings.

SKA

The SKA project is an international effort to build the world's largest radio telescope, with a square kilometre (one million square metres) of collecting area. The scale of the SKA represents a huge leap forward in both engineering and research & development towards building and delivering a radio telescope, and will deliver a correspondingly transformational increase in science capability when operational. The SKA Organisation, with its headquarters at Jodrell Bank Observatory near Manchester, UK, was established in December 2011 as a not-for-profit company in order to formalise relationships between the international partners and to centralise the leadership of the project. Eleven countries are currently members of the SKA Organisation, and some further countries expressed their interest in joining the project in the near-term future.

Contact information: William Garnier, Communications and Outreach Manager, SKA Organisation.

Email: w.garnier@skatelescope.org Phone: +44 (0) 161 306 9613 www.skatelescope.org

RFEL
RFEL Ltd is a UK-based innovative electronic systems designer, providing real-time high specification signal, image and video processing products, FPGA solutions and design services to defence, security, communications and instrumentation markets.


Further Information and illustrations
RFEL Ltd
E info@rfel.com
T +44 (0) 1983 216600
Press Information
Nigel Robson, Vortex PR
E nigel@vortexpr.com
T +44 (0) 1481 233080
www.vortexpr.com

All trademarks are the property of their respective owners

Nigel Robson | Vortex PR
Further information:
http://www.rfel.com

Further reports about: Max Planck Institute RFEL SKA radio signal radio telescope signal processing

More articles from Physics and Astronomy:

nachricht Spiral arms: not just in galaxies
30.09.2016 | Max-Planck-Institut für Radioastronomie

nachricht Discovery of an Extragalactic Hot Molecular Core
29.09.2016 | National Astronomical Observatory of Japan

All articles from Physics and Astronomy >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: New welding process joins dissimilar sheets better

Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of light metals.
Scientists at the University of Stuttgart have now developed two new process variants that will considerably expand the areas of application for friction stir welding.
Technologie-Lizenz-Büro (TLB) GmbH supports the University of Stuttgart in patenting and marketing its innovations.

Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of...

Im Focus: First quantum photonic circuit with electrically driven light source

Optical quantum computers can revolutionize computer technology. A team of researchers led by scientists from Münster University and KIT now succeeded in putting a quantum optical experimental set-up onto a chip. In doing so, they have met one of the requirements for making it possible to use photonic circuits for optical quantum computers.

Optical quantum computers are what people are pinning their hopes on for tomorrow’s computer technology – whether for tap-proof data encryption, ultrafast...

Im Focus: OLED microdisplays in data glasses for improved human-machine interaction

The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.

“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...

Im Focus: Artificial Intelligence Helps in the Discovery of New Materials

With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.

Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...

Im Focus: Complex hardmetal tools out of the 3D printer

For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.

Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Call for Paper – Panacea Green Infrastructure?

30.09.2016 | Event News

HLF: From an experiment to an establishment

29.09.2016 | Event News

European Health Forum Gastein 2016 kicks off today

28.09.2016 | Event News

 
Latest News

Researcher creates a controlled rogue wave in realistic oceanic conditions

30.09.2016 | Earth Sciences

Call for Paper – Panacea Green Infrastructure?

30.09.2016 | Event News

Spiral arms: not just in galaxies

30.09.2016 | Physics and Astronomy

VideoLinks
B2B-VideoLinks
More VideoLinks >>>