The initial results puzzled the world three years ago: the size of the proton (to be precise, its charge radius), measured in exotic hydrogen, in which the electron orbiting the nucleus is replaced by a negatively charged muon, yielded a value significantly smaller than the one from previous investigations of regular hydrogen or electron-proton-scattering.
Photo: Dr. Franz Kottmann, Dr. Randolf Pohl, and Dr. Daniel Covita (from left to right) in front of a superconducting magnet (5 Tesla) in which the experiment is set up: both the myon detectors and the hydrogen target are located inside the magnet. The strong magnetic field is necessary for collimating the muon beam down to a size as small as the diameter of a pencil.
© CREMA-collaboration, MPQ
A new measurement by the same team confirms the value of the electric charge radius and makes it possible for the first time to determine the magnetic radius of the proton via laser spectroscopy of muonic hydrogen (Science, January 25, 2013). The experiments were carried out at the Paul Scherrer Institut (PSI) (Villigen, Switzerland) which is the only research institute in the world providing the necessary amount of muons.
The international collaboration included the Max-Planck-Institute of Quantum Optics (MPQ) in Garching near Munich, the Swiss Federal Institute of Technology ETH Zurich (Switzerland), the University of Fribourg (Switzerland), the Institut für Strahlwerkzeuge (IFSW) of the Universität Stuttgart, Dausinger & Giesen GmbH, Stuttgart, the Universities of Coimbra and Aveiro (Portugal), and the Laboratoire Kastler Brossel (LKB), Paris. The new results fuel the debate as to whether the discrepancies observed can be explained by standard physics, for example an incomplete understanding of the systematic errors that are inherent to all measurements, or whether they are due to new physics.
The hydrogen atom has played a key role in the investigation of the fundamental laws of physics. Its nucleus consists of a single positively charged proton orbited by a negatively charged electron, a model whose success dates from its proposed by Bohr in 1913. The energy levels of this simplest of atoms can be predicted with excellent precision from the theory of quantum electrodynamics.
However, the calculations have to take into account that – in contrast to the point-like electron – the proton is an extended object with a finite size, made of three quarks bound by so-call ‘gluons’. Therefore, the electric charge as well as the magnetism of the proton is distributed over a certain volume. The extended nature of the proton causes a shift of the energy levels in hydrogen. Hence the electric and the magnetic charge radii can be deduced from a measurement of the level shifts.
In 2010, the first results on the spectroscopic determination of the shift of the so-called 2S energy level in muonic hydrogen were published. The exotic atoms were generated by bombarding a target of regular hydrogen with muons from an accelerator at PSI. Muons behave a lot like electrons, except for their mass: muons are 200 times heavier than electrons. The atomic orbit of the muon is therefore much closer to the proton than the electron’s orbit in a regular hydrogen atom. This results in a much larger sensitivity of the muon’s energy level to the proton size and hence to a stronger shift of the energy levels. Measuring the level shifts is very technologically demanding: muonic hydrogen is very short-lived (muons decay after about two millionths of a second), so the light pulses for the excitation of the resonance have to be fired onto the hydrogen target only nanoseconds after the detection of a muon. The new disk laser technology developed by the Institut für Strahlwerkzeuge (IFSW) of the Universität Stuttgart was an important element to fulfil this requirement. The lasers necessary for exciting the resonance were developed by the Max-Planck-Institute of Quantum Optics in cooperation with the Laboratoire Kastler Brossel (Paris). Coimbra, Aveiro and Fribourg universities were responsible for the development of the x-rays detectors.
In the experiment described in the newly published Science article, the energy shift was determined for another transition. This leads to a new measurement of the electric charge radius of the proton. Its value of 0.84087(39) femtometres (1 fm = 0.000 000 000 000 001 metre) is in good agreement with the one published in 2010, but 1.7 times as precise. The discrepancy with existing radius measurements made in regular hydrogen or by electron-proton-scattering, the so-called proton size puzzle, has thus been reaffirmed.
In addition, the new measurement allows a determination of the magnetic radius of the proton for the first time by laser spectroscopy of muonic hydrogen. This results in a value of 0.87(6) femtometres, in agreement with all previous measurements. Though the precision is, at present, of the same order as in other experiments, laser spectroscopy of muonic hydrogen has the potential of achieving a much better accuracy in the determination of the magnetic proton radius in the future.Physicists around the world are actively seeking a solution to the proton size puzzle. Previous measurements in regular hydrogen and by electron-proton-scattering are being reanalyzed and even repeated. Theorists of various disciplines suggested ways to explain the discrepancy. Very interesting proposals explain the discrepancies by physics beyond the standard model. Other explanations suggest a proton structure of higher complexity than assumed today which only reveals itself under the influence of the heavy muon. New measurements are needed to check on these possibilities. Muon-proton-scattering experiments are being developed at PSI, new precision measurements at the electron accelerator in Mainz are being considered, and the PSI team plans to measure, for the first time ever, laser spectroscopy of the muonic helium atom in the course of this year. The required modifications of the current laser system are being investigated in the frame of the project “Thin-disk laser for muonic atoms spectroscopy” which (financed by the Swiss National Science Foundation (SNSF) and the Deutsche Forschungsgemeinschaft (DFG)) is carried out at the ETH Zürich (Prof. Dr. Klaus Kirch, Dr. Aldo Antognini) and at the IFSW (Prof. Dr. Thomas Graf, Dr. Andreas Voß). The Project “Muonic Helium” is also generously supported by the European Research Council (ERC) by an ERC Starting Grant held by Dr. Randolf Pohl from the MPQ in Garching.
Olivia Meyer-StrengOriginal publication:
Science, January 25, 2013
The experiment was the collaborative success of many institutes from various countries: Max-Planck-Institute of Quantum Optics, Garching, Germany, Institute for Particle Physics, ETH Zurich, Switzerland, Laboratoire Kastler Brossel, École Normale Supérieure, CNRS, and Université P. et M. Curie, Paris, France, Dausinger & Giesen GmbH, Stuttgart, Germany, Departamento de Física, Universidade de Coimbra, Portugal, Departamento de Física, Universidade de Aveiro, Portugal, Physics Department, Yale University, New Haven, USA, Institut für Strahlwerkzeuge, Universität Stuttgart, Germany, Physics Department, National Tsing Hua University, Hsinchu, Taiwan, Département de Physique, Université de Fribourg, Switzerland, Department of Chemistry, Princeton University, Princeton, USA, Paul Scherrer Institute, Villigen, Switzerland, Ludwig-MaximiliansUniversität, Munich, GermanyContact:
Dr. Olivia Meyer-Streng | Max-Planck-Institut
Spiral arms: not just in galaxies
30.09.2016 | Max-Planck-Institut für Radioastronomie
Discovery of an Extragalactic Hot Molecular Core
29.09.2016 | National Astronomical Observatory of Japan
Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of light metals.
Scientists at the University of Stuttgart have now developed two new process variants that will considerably expand the areas of application for friction stir welding.
Technologie-Lizenz-Büro (TLB) GmbH supports the University of Stuttgart in patenting and marketing its innovations.
Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of...
Optical quantum computers can revolutionize computer technology. A team of researchers led by scientists from Münster University and KIT now succeeded in putting a quantum optical experimental set-up onto a chip. In doing so, they have met one of the requirements for making it possible to use photonic circuits for optical quantum computers.
Optical quantum computers are what people are pinning their hopes on for tomorrow’s computer technology – whether for tap-proof data encryption, ultrafast...
The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.
“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...
With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.
Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...
For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.
Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...
30.09.2016 | Event News
29.09.2016 | Event News
28.09.2016 | Event News
30.09.2016 | Life Sciences
30.09.2016 | Life Sciences
30.09.2016 | Earth Sciences