Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Grow Your Own Teeth

03.05.2004


People who have lost or damaged teeth could soon be growing their own, thanks to a major scientific breakthrough by a start-up, Odontis Ltd, formed by King’s College, London. An investment of £400,000 from NESTA (the National Endowment for Science, Technology and the Arts) – the organisation that nurtures UK creativity and innovation and the Wellcome Trust biomedial research charity, will enable the company to move onto the next stage of development.



Damaged or missing teeth are a large and significant problem with dentures, bridges or synthetic implants being the only treatment currently available. These methods are often invasive and surgically traumatic.

Odontis’ pioneering technology will allow the patient to grow his or her own natural replacement teeth instead of having a synthetic implant. As well as the benefit of not experiencing surgical trauma, there is also the psychological boost of ‘having one’s own teeth’.


The project is the brainchild of genetic research scientist, Professor Paul Sharpe, who is currently the Head of Division of Craniofacial Biology and Biomaterials of the Dental Institute, Kings College London. His discovery is based on human stem cell technology.

Stem cells are taken from the patient, treated and cultured in a laboratory, then re-implanted in the patient’s jaw under the gum at the site of the missing or extracted tooth. This then grows into a fully-formed, live tooth in the same way that teeth develop naturally.

To date, no companies or research groups in the world have been able to demonstrate the formation of a living, natural tooth.

In both the US and UK, adults aged over 50 lose on average 12 teeth, including four wisdom molars, from a full complement of 32 teeth. Lost teeth can lead to problems with health, nutrition and appearance.

On receiving NESTA’s investment, Professor Sharpe says: “We are delighted to receive this investment from NESTA and the Wellcome Trust. It will be a major help in taking the technology forward which will be eventually used on patients.”

The project is receiving a total investment of £500,000: £100,000 from NESTA, £300,000 University Translation Award from the Wellcome Trust and £100,000 from a business angel. Kinetique Biomedical Seed Fund has already invested £250,000 in the proof of concept phase.

Professor Sharpe, adds: “A key medical advantage of our technology is that a living tooth can preserve the health of the surrounding tissues much better than artificial prosthesis. Teeth are living, and they are able to respond to a person’s bite. They move, and in doing so they maintain the health of the surrounding gums and teeth.”

Mark White, NESTA Invention and Innovation Director, says: “Odontis have come up with a dental method that is highly innovative and pioneering in its approach. We hope that our seed investment will bring about a major success story for UK the research and science community.”

Hannah Daws | alfa
Further information:
http://www.nesta.org.uk

More articles from Health and Medicine:

nachricht New leukemia treatment offers hope
23.09.2016 | King Abdullah University of Science and Technology

nachricht Alzheimer’s: Cellular Mechanism Provides Explanation Model for Declining Memory Performance
21.09.2016 | Deutsches Zentrum für Neurodegenerative Erkrankungen e.V. (DZNE)

All articles from Health and Medicine >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: OLED microdisplays in data glasses for improved human-machine interaction

The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.

“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...

Im Focus: Artificial Intelligence Helps in the Discovery of New Materials

With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.

Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...

Im Focus: Complex hardmetal tools out of the 3D printer

For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.

Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...

Im Focus: Launch of New Industry Working Group for Process Control in Laser Material Processing

At AKL’16, the International Laser Technology Congress held in May this year, interest in the topic of process control was greater than expected. Appropriately, the event was also used to launch the Industry Working Group for Process Control in Laser Material Processing. The group provides a forum for representatives from industry and research to initiate pre-competitive projects and discuss issues such as standards, potential cost savings and feasibility.

In the age of industry 4.0, laser technology is firmly established within manufacturing. A wide variety of laser techniques – from USP ablation and additive...

Im Focus: New laser joining technologies at ‘K 2016’ trade fair

Every three years, the plastics industry gathers at K, the international trade fair for plastics and rubber in Düsseldorf. The Fraunhofer Institute for Laser Technology ILT will also be attending again and presenting many innovative technologies, such as for joining plastics and metals using ultrashort pulse lasers. From October 19 to 26, you can find the Fraunhofer ILT at the joint Fraunhofer booth SC01 in Hall 7.

K is the world’s largest trade fair for the plastics and rubber industry. As in previous years, the organizers are expecting 3,000 exhibitors and more than...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Experts from industry and academia discuss the future mobile telecommunications standard 5G

23.09.2016 | Event News

ICPE in Graz for the seventh time

20.09.2016 | Event News

Using mathematical models to understand our brain

16.09.2016 | Event News

 
Latest News

Chains of nanogold – forged with atomic precision

23.09.2016 | Life Sciences

New leukemia treatment offers hope

23.09.2016 | Health and Medicine

Self-assembled nanostructures hit their target

23.09.2016 | Life Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>