Two papers appearing in the journals Nature Communications and Nature Nanotechnology describe portable devices that combine microfluidic technology with nuclear magnetic resonance (NMR) to not only diagnose these important infections but also determine the presence of antibiotic-resistant bacterial strains.
On this 2.5- by 7.5-cm cartridge, DNA extracted from sputum samples is amplified in the chambers on the left. TB-specific sequences are magnetically labeled in the microfluidic mixing channels in the center and detected by passage through the micro-NMR coil on the right.
Credit: Center for Systems Biology, Massachusetts General Hospital
"Rapidly identifying the pathogen responsible for an infection and testing for the presence of resistance are critical not only for diagnosis but also for deciding which antibiotics to give a patient," says Ralph Weissleder, MD, PhD, director of the MGH Center for Systems Biology (CSB) and co-senior author of both papers. "These described methods allow us to do this in two to three hours, a vast improvement over standard culturing practice, which can take as much as two weeks to provide a diagnosis."
Investigators at the MGH CSB previously developed portable devices capable of detecting cancer biomarkers in the blood or in very small tissue samples. Target cells or molecules are first labeled with magnetic nanoparticles, and the sample is then passed through a micro NMR system capable of detecting and quantifying levels of the target. But initial efforts to adapt the system to bacterial diagnosis had trouble finding antibodies – the detection method used in the earlier studies – that would accurately detect the specific bacteria. Instead the team switched to targeting specific nucleic acid sequences.
The system described in the Nature Communications paper, published on April 23, detects DNA from the tuberculosis bacteria in small sputum samples. After DNA is extracted from the sample, any of the target sequence that is present is amplified using a standard procedure, then captured by polymer beads containing complementary nucleic acid sequences and labeled with magnetic nanoparticles with sequences that bind to other portions of the target DNA. The miniature NMR coil incorporated into the device – which is about the size of a standard laboratory slide – detects any TB bacterial DNA present in the sample.
Tests of the device on samples from patients known to have TB and from healthy controls identified all positive samples with no false positives in less than three hours. Existing diagnostic procedures can take weeks to provide results and can miss up to 40 percent of infected patients. Results were even stronger for patients infected with both TB and HIV – probably because infection with both pathogens leads to high levels of the TB bacteria – and specialized nucleic acid probes developed by the research team were able to distinguish treatment-resistant bacterial strains.
The Nature Nanotechnology paper, being issued online today, describes a similar system using ribosomal RNA (rRNA) – already in use as a bacterial biomarker – as a target for nanoparticle labeling. The investigators developed both a universal nucleic acid probe that detects an rRNA region common to many bacterial species and a set of probes that target sequences specific to 13 clinically important pathogens, including Streptococcus pneumoniae, Escherichia coli and methicillin-resistant Staphylococcus aureus (MRSA).
The device was sensitive enough to detect as few as one or two bacteria in a 10 ml blood sample and to accurately estimate bacterial load. Testing the system on blood samples from patients with known infections accurately identified the particular bacterial species in less than two hours and also detected two species that had not been identified with standard culture techniques.
While both systems require further development to incorporate all steps into sealed, stand-alone devices, reducing the risk of contamination, Weissleder notes that the small size and ease of use of these devices make them ideal for use in developing countries. "The magnetic interactions that pathogen detection is based on are very reliable, regardless of the quality of the sample, meaning that extensive purification – which would be difficult in resource-limited setting – is not necessary. The ability to diagnose TB in a matter of hours could allow testing and treatment decisions within the same clinic visit, which can be crucial to controlling the spread of TB in developing countries."
Hakho Lee, PhD, of the MGH Center for Systems Biology. co-senior author of both papers, notes that the system will alsohave important applications in developed countries. "The capacity of the system not only to identify bacterial species but also to differentiate factors such as antibiotic resistance will help clinicians treat patients with the 'right' drugs from the start, which also helps reduce the emergence of treatment-resistant strains. The fact that this device requires only a tiny drop of the sample to be tested will be helpful in instances when specimens can be hard to obtain, such as treating children or seniors."
Weissleder is a professor of Radiology, and Lee is an assistant professor of Radiology at Harvard Medical School. Co-lead authors of the Nature Communications paper are Monty Liong, PhD, of the MGH CSB and Anh Hoang, PhD, of the MGH Center for Engineering in Medicine; co-authors include investigators from Harvard School of Public Health and the Broad Institute. Hyun Jung Chung, PhD, of the MGH CSB is lead author of the Nature Nanotechnology report.
Support for both studies includes National Institutes of Health grants R01EB004626, R01EB010011, R01HL113156, P41EB002503, HHSN268201000044C, R01HL113156 and T32CA79443. The MGH has applied for patents on the technology described in this paper.
Massachusetts General Hospital, founded in 1811, is the original and largest teaching hospital of Harvard Medical School. The MGH conducts the largest hospital-based research program in the United States, with an annual research budget of more than $775 million and major research centers in AIDS, cardiovascular research, cancer, computational and integrative biology, cutaneous biology, human genetics, medical imaging, neurodegenerative disorders, regenerative medicine, reproductive biology, systems biology, transplantation biology and photomedicine. In July 2012, MGH moved into the number one spot on the 2012-13 U.S. News & World Report list of "America's Best Hospitals."
Sue McGreevey | EurekAlert!
Further reports about: > Bird Communication > Broad Institute > DNA > Escherichia coli > MGH > Medical Wellness > Nanotechnology > Nature Immunology > Nature Nanotechnology > Portable breast scanner > bacterial species > bacterial strains > blood sample > cancer biomarker > developing countries > health services > magnetic nanoparticles > neurodegenerative disorder > nucleic acid sequence > radiology > resistant bacteria > synthetic biology
Custom-tailored strategy against glioblastomas
26.09.2016 | Rheinische Friedrich-Wilhelms-Universität Bonn
New leukemia treatment offers hope
23.09.2016 | King Abdullah University of Science and Technology
Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of light metals.
Scientists at the University of Stuttgart have now developed two new process variants that will considerably expand the areas of application for friction stir welding.
Technologie-Lizenz-Büro (TLB) GmbH supports the University of Stuttgart in patenting and marketing its innovations.
Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of...
Optical quantum computers can revolutionize computer technology. A team of researchers led by scientists from Münster University and KIT now succeeded in putting a quantum optical experimental set-up onto a chip. In doing so, they have met one of the requirements for making it possible to use photonic circuits for optical quantum computers.
Optical quantum computers are what people are pinning their hopes on for tomorrow’s computer technology – whether for tap-proof data encryption, ultrafast...
The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.
“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...
With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.
Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...
For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.
Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...
28.09.2016 | Event News
27.09.2016 | Event News
23.09.2016 | Event News
28.09.2016 | Earth Sciences
28.09.2016 | Power and Electrical Engineering
28.09.2016 | Event News