Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Stanford researchers discover how brain regions work together, or alone

03.02.2014
Our brains have billions of neurons grouped into different regions. These regions often work alone, but sometimes must join forces. How do regions communicate selectively?

Stanford researchers may have solved a riddle about the inner workings of the brain, which consists of billions of neurons, organized into many different regions, with each region primarily responsible for different tasks.

The various regions of the brain often work independently, relying on the neurons inside that region to do their work. At other times, however, two regions must cooperate to accomplish the task at hand.

The riddle is this: what mechanism allows two brain regions to communicate when they need to cooperate yet avoid interfering with one another when they must work alone?

In a paper published today in Nature Neuroscience, a team led by Stanford electrical engineering professor Krishna Shenoy reveals a previously unknown process that helps two brain regions cooperate when joint action is required to perform a task.

"This is among the first mechanisms reported in the literature for letting brain areas process information continuously but only communicate what they need to," said Matthew T. Kaufman, who was a postdoctoral scholar in the Shenoy lab when he co-authored the paper.

Kaufman initially designed his experiments to study how preparation helps the brain make fast and accurate movements – something that is central to the Shenoy lab's efforts to build prosthetic devices controlled by the brain.

But the Stanford researchers used a new approach to examine their data that yielded some findings that were broader than arm movements.

The Shenoy lab has been a pioneer in analyzing how large numbers of neurons function as a unit. As they applied these new techniques to study arm movements, the researchers discovered a way that different regions of the brain keep results localized or broadcast signals to recruit other regions as needed.

"Our neurons are always firing, and they're always connected," explained Kaufman, who is now pursuing brain research at Cold Spring Harbor Laboratory in New York. "So it's important to control what signals are communicated from one area to the next."

Experimental design

The scientists derived their findings by studying monkeys that had been trained to make precise arm movements. The monkeys were taught to pause briefly before making the reach, thus letting their brain prepare for a moment before moving.

Remember, the goal was to help build brain-controlled prostheses. Because the neurons in the brain always send out signals, engineers must be able to differentiate the command to act from the signals that accompany preparation.

To understand how this worked with the monkey's arm, the scientists took electrical readings at three places during the experiments: from the arm muscles, and from each of two motor cortical regions in the brain known to control arm movements.

The muscle readings enabled the scientists to ascertain what sorts of signals the arm receives during the preparatory state compared with the action step.

The brain readings were more complex.

Two regions control arm movements. They are located near the top center of the brain, an inch to the side.

Each of the two regions is made up of more than 20 million neurons. The scientists wanted to understand the behavior of both regions, but they couldn't probe millions of neurons. So they took readings from carefully chosen samples of about 100 to 200 individual neurons in each of the two regions.

During experiments the scientists examined the monkeys' brain readings at two levels.

On one level, they considered the activity of individual neurons – how quickly or slowly the neurons fired signals.

At a higher level, the scientists also identified patterns of changes in the activity of many neurons. This is a relatively new technique for neuroscience, called a population and dimensionality analysis. Its goal is to understand how neurons work together in entire regions of the brain.

Hunting for the signal

The key findings emerged from understanding how individual neurons worked together as a population to drive the muscles.

As the monkey prepared for movement but held its arm still, many neurons in both of the motion-control regions registered big changes in activity.

But this preparatory activity did not drive the movement. Why?

The scientists realized that, during the preparatory stage, the brain carefully balanced the activity changes of all those individual neurons inside each region. While some neurons fired faster, others slowed down so that the entire population broadcast a constant message to the muscles.

But at the moment of action, the population readings changed in a measurable and consistent way.

By looking at the data, the scientists could correlate these changes at the population level to the flexing of the muscles. This change at the population level differentiated action from preparation.

Broader ramifications

The Stanford researchers put great effort into the mathematical analysis of their data. They had to be sure that each of the two populations of neurons exhibited the key muscle-controlling changes in activity when (and only when) the muscles flexed. This was the signal they had set out to find.

Kaufman said he was about one year into what turned out to be a three-year project when he realized there might be broader ramifications to this population-level and dimensionality identification idea.

He was presenting an early version of the brain-to-muscle results at a scientific conference when a question from one his peers caused him to think. He had found population-level signals between the brain regions and the muscles. Did the two brain regions, each partially in control of the action, couple and uncouple with each other in a similar way?

"I started the analysis in my hotel room that night at one a.m.," Kaufman recalled. "Soon enough, the results were clear."

"The serendipitous interplay between basic science and engineering never ceases to amaze me," said Professor Shenoy, who is also professor of neurobiology (by courtesy) and bioengineering (affiliate), and a Bio-X faculty member. "Some of the best ideas for the design of prosthetic systems to help people with paralysis come from basic neuroscience research, as is the case here, and some of the deepest scientific insights come from engineering measurement and medical systems."

Also contributing to this paper were former postdocs Mark M. Churchland, now a professor of neuroscience at Columbia University and co-director of the Grossman Center for the Statistics of the Mind, and Dr. Stephen I. Ryu, now a consulting associate professor of electrical engineering at Stanford and a neurosurgeon at the Palo Alto Medical Foundation.

Principal funding for the work came from the National Science Foundation, the Defense Advanced Research Projects Agency, the National Institutes of Health (NIH) and the NIH Director's Pioneer Award.

Tom Abate | EurekAlert!
Further information:
http://www.stanford.edu

More articles from Life Sciences:

nachricht Chains of nanogold – forged with atomic precision
23.09.2016 | Suomen Akatemia (Academy of Finland)

nachricht Self-assembled nanostructures hit their target
23.09.2016 | King Abdullah University of Science and Technology

All articles from Life Sciences >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: OLED microdisplays in data glasses for improved human-machine interaction

The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.

“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...

Im Focus: Artificial Intelligence Helps in the Discovery of New Materials

With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.

Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...

Im Focus: Complex hardmetal tools out of the 3D printer

For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.

Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...

Im Focus: Launch of New Industry Working Group for Process Control in Laser Material Processing

At AKL’16, the International Laser Technology Congress held in May this year, interest in the topic of process control was greater than expected. Appropriately, the event was also used to launch the Industry Working Group for Process Control in Laser Material Processing. The group provides a forum for representatives from industry and research to initiate pre-competitive projects and discuss issues such as standards, potential cost savings and feasibility.

In the age of industry 4.0, laser technology is firmly established within manufacturing. A wide variety of laser techniques – from USP ablation and additive...

Im Focus: New laser joining technologies at ‘K 2016’ trade fair

Every three years, the plastics industry gathers at K, the international trade fair for plastics and rubber in Düsseldorf. The Fraunhofer Institute for Laser Technology ILT will also be attending again and presenting many innovative technologies, such as for joining plastics and metals using ultrashort pulse lasers. From October 19 to 26, you can find the Fraunhofer ILT at the joint Fraunhofer booth SC01 in Hall 7.

K is the world’s largest trade fair for the plastics and rubber industry. As in previous years, the organizers are expecting 3,000 exhibitors and more than...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Experts from industry and academia discuss the future mobile telecommunications standard 5G

23.09.2016 | Event News

ICPE in Graz for the seventh time

20.09.2016 | Event News

Using mathematical models to understand our brain

16.09.2016 | Event News

 
Latest News

Chains of nanogold – forged with atomic precision

23.09.2016 | Life Sciences

New leukemia treatment offers hope

23.09.2016 | Health and Medicine

Self-assembled nanostructures hit their target

23.09.2016 | Life Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>