Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Solving An Evolutionary Puzzle

13.02.2014
New Bedford Harbor Pollution Prompts PCB-Resistance in Atlantic Killifish

For four decades, waste from nearby manufacturing plants flowed into the waters of New Bedford Harbor—an 18,000-acre estuary and busy seaport. The harbor, which is contaminated with polychlorinated biphenyls (PCBs) and heavy metals, is one of the EPA’s largest Superfund cleanup sites.


In a new paper published in BMC Evolutionary Biology, researchers found that changes in a receptor protein, called the aryl hydrocarbon receptor 2 (AHR2), may explain how killifish in New Bedford Harbor evolved genetic resistance to PCBs.
(Courtesy of Evan D'Alessandro, Rosenstiel School of Marine and Atmospheric Science)

It’s also the site of an evolutionary puzzle that researchers at Woods Hole Oceanographic Institution (WHOI) and their colleagues have been working to solve.

Atlantic killifish—common estuarine fishes about three inches long—are not only tolerating the toxic conditions in the harbor, they seem to be thriving there. How have they been able to adapt and live in such a highly contaminated environment?

In a new paper published in BMC Evolutionary Biology, researchers found that changes in a receptor protein, called the aryl hydrocarbon receptor 2 (AHR2), may explain how killifish in New Bedford Harbor evolved genetic resistance to PCBs.

Killifish are prey fish that do not migrate. They live their whole lives in the same area, generally within a few hundred yards of the spot where they were hatched. Unlike fish that may come in and out of the harbor sporadically during the summer months to feed, the killifish are there year round and spend winters burrowing into the contaminated sediment.

Normally when fish are exposed to harmful chemicals, the body steps up production of enzymes that break down the pollutants, a process controlled by the AHR2 protein. Some of the PCBs are not broken down in this way, and their continued stimulation of AHR2 disrupts cellular functions, leading to toxicity. In the New Bedford Harbor killifish, the AHR2 system has become resistant to this effect.

"The killifish have managed to shut down the pathway," said Mark Hahn, a biologist at WHOI and coauthor of the paper. "It’s an example of how some populations are able to adapt to changes in their environment—a snapshot of evolution at work."

The research team, which includes colleagues from the Atlantic Ecology Division of the U.S. Environmental Protection Agency, the Boston University School of Public Health, and the University of North Carolina at Charlotte, used a "candidate gene" approach, sequencing the protein-coding portion of three candidate resistance genes (AHR1, AHR2, AHRR) in fish from the New Bedford site and six other locations, both clean and polluted, along the northeast coast.

Looking for single nucleotide polymorphisms (SNPs) or subtle variations in the DNA sequence, they found differences in AHR2, which plays an important role in mediating toxicity in early life stages.

"The function of this receptor is what mediates the toxic effects," said Sibel Karchner, a coauthor and biologist in Hahn’s lab. "If you don’t have a functional receptor, then you’re not going to get the toxic effects as much as a fish that does."

AHR2 in killifish has 951 amino acids and nine of those vary among individuals. The different combinations of amino acid variants lead to 26 different forms of the protein.

"We see that the pattern of variants present in the New Bedford Harbor killifish is much different from the patterns at nearby sites, which is unexpected under normal circumstances," Hahn said. "There are a few protein variants that are common in New Bedford Harbor killifish, but uncommon elsewhere. Similarly, the protein variants that are most common at the nearby reference sites are much less common in the New Bedford Harbor killifish."

A companion paper published in BMC Evolutionary Biology by colleagues at the EPA lab in Narragansett, RI, that used a "candidate gene scan" approach—examining SNPs from 42 genes associated with the AHR pathway—also identified AHR2 as a gene that appears to be under selection and is likely to be involved in the resistance. The results suggest that evolution of resistance in independent populations of killifish converges on the same target gene.

"The results of these studies and the genetic tools developed in the course of these studies are helping to dissect how evolution occurs on a contemporary (rather than geological) scale and why some species are more likely to adapt to a rapidly changing world," said Diane Nacci, a research biologist at EPA and coauthor on both papers.

AHR2 is also the same gene identified in a 2011 Science paper by WHOI biologists and colleagues from New York University and NOAA on PCB-resistant tomcod from the Hudson River. AHR2 proteins in the Hudson River tomcod are missing two of the 1,104 amino acids normally found in this protein.

"Even though the specific molecular changes that are found in PCB-resistant tomcod and killifish are different, in both species AHR2 seems to be one of the genes—possibly the major gene—that is responsible for the resistance," Hahn said.

While the killifish themselves seem to be immune to the toxic effects of the PCBs, they can still transfer contaminants up the food chain. They’re a major source of food for bluefish, striped bass and other fish eaten by humans.

Despite their healthy appearance, there could be unknown negative costs for the New Bedford Harbor killifish associated with the resistance to PCBs. Researchers will look next at whether the adaptation affects how the killifish are able to respond to other kinds of stressors in their environment, such as low oxygen levels.

"Obviously, the fact that they are resistant to PCBs allows them to survive in this really polluted environment, but what will happen once the harbor gets cleaned up? There could be costs that make it no longer adaptive for these fish to live there," Hahn said.

"It’s a fascinating example of how human activities can drive evolution," he added. "The ability to adapt to changing conditions is going to become even more important as humans impact the environment, whether it’s from ocean acidification or increasing temperatures or other types of global changes that are occurring."

In addition to Hahn and Karchner, WHOI researchers involved in the work included lead author Adam Reitzel (now an Assistant Professor at the University of North Carolina at Charlotte) and Diana Franks. This work was supported by the National Insitute of Environmental Health Sciences through the Superfund Research Program at Boston University, the Hudson River Foundation, and a National Science Foundation grant.

The Woods Hole Oceanographic Institution is a private, non-profit organization on Cape Cod, Mass., dedicated to marine research, engineering, and higher education. Established in 1930 on a recommendation from the National Academy of Sciences, its primary mission is to understand the ocean and its interaction with the Earth as a whole, and to communicate a basic understanding of the ocean's role in the changing global environment.

Originally published: February 12, 2014

Media Relations Office | EurekAlert!
Further information:
http://www.whoi.edu

More articles from Life Sciences:

nachricht New mechanisms uncovered explaining frost tolerance in plants
26.09.2016 | Technische Universität München

nachricht Chains of nanogold – forged with atomic precision
23.09.2016 | Suomen Akatemia (Academy of Finland)

All articles from Life Sciences >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: OLED microdisplays in data glasses for improved human-machine interaction

The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.

“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...

Im Focus: Artificial Intelligence Helps in the Discovery of New Materials

With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.

Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...

Im Focus: Complex hardmetal tools out of the 3D printer

For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.

Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...

Im Focus: Launch of New Industry Working Group for Process Control in Laser Material Processing

At AKL’16, the International Laser Technology Congress held in May this year, interest in the topic of process control was greater than expected. Appropriately, the event was also used to launch the Industry Working Group for Process Control in Laser Material Processing. The group provides a forum for representatives from industry and research to initiate pre-competitive projects and discuss issues such as standards, potential cost savings and feasibility.

In the age of industry 4.0, laser technology is firmly established within manufacturing. A wide variety of laser techniques – from USP ablation and additive...

Im Focus: New laser joining technologies at ‘K 2016’ trade fair

Every three years, the plastics industry gathers at K, the international trade fair for plastics and rubber in Düsseldorf. The Fraunhofer Institute for Laser Technology ILT will also be attending again and presenting many innovative technologies, such as for joining plastics and metals using ultrashort pulse lasers. From October 19 to 26, you can find the Fraunhofer ILT at the joint Fraunhofer booth SC01 in Hall 7.

K is the world’s largest trade fair for the plastics and rubber industry. As in previous years, the organizers are expecting 3,000 exhibitors and more than...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Experts from industry and academia discuss the future mobile telecommunications standard 5G

23.09.2016 | Event News

ICPE in Graz for the seventh time

20.09.2016 | Event News

Using mathematical models to understand our brain

16.09.2016 | Event News

 
Latest News

Stronger turbine blades with molybdenum silicides

26.09.2016 | Materials Sciences

Scientists Find Twisting 3-D Raceway for Electrons in Nanoscale Crystal Slices

26.09.2016 | Materials Sciences

Lowering the Heat Makes New Materials Possible While Saving Energy

26.09.2016 | Materials Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>