However, in addition to lightning in the troposphere, there are kinds of lightning discharges which occur above the thunderstorms. Up to now, lightning discharges above storms include sprite, elves (Emissions of Light and VLF perturbation due to EMP Sources, elves), Blue jet and Gigantic jet etc, and all of these discharges are totally named as Transient Luminous Events (TLEs). Gigantic jets were observed in America, Taiwan and Europe regions. Gigantic jet is sporadic compared with sprite, elves etc. Is there gigantic jet in middle latitude region in mainland China?
This images shows: (a) Observed gigantic jet in this paper; (b) Gigantic jet producing storm A and five sprite producing storm B. The two yellow lines represent the range of the line-of-sight extending from the observation site, that is, the camera field of view (FOV). The pink line is the gigantic jet azimuth in the camera FOV.
Credit: ©Science China Press
A recent study entitled "A gigantic jet event observed over a thunderstorm in mainland China", has been published in Chinese Science Bulletin, 2012, Vol 57(36). Detailed analysis of the observed gigantic jet and its associated storm were analyzed by using multiple data sets including low-light level observation, lightning location network, Doppler radar data and infrared weather images. This report was accomplished by the corresponding author Jing YangCa research associate from Key Laboratory of Middle Atmosphere and Global Environment Observation (LAGEO), Institute of Atmospheric Physics, Chinese Academy of Sciences.
Gigantic jet is a kind of large transient discharge which occurs above thunderstorms. It initiates from the thundercloud top and develops upward to the ionosphere, and connects the thunderstorm and ionosphere directly. Previous studies show that gigantic jet is often observed in tropical or subtropical regions, sometimes over winter thunderstorms. Is there gigantic jet in middle latitude region in mainland China? In addition, previous studies show that gigantic jet and sprites often occurred over the same storm. Is there any special case except this?
A gigantic jet event observed in middle latitude region in mainland China was first reported. The results show that the gigantic jet has tree-like shape, and the gigantic jet producing storm center located at about 35.6‹N, 119.8‹E. Different from other study that sprites and gigantic jets were produced by the same storm, two different storms produced two types of TLEs, that is, the gigantic jet producing storm produced only one gigantic jet event during its lifetime and five sprites were produced over another storm in this study. Also different from results in other studies that positive CGs dominated during a time period centered at gigantic jet, negative CGs dominated during a time period centered at the gigantic jet event and during most of the time in storm life in this study.
Gigantic jet starts from the thundercloud top and propagates upwards to the ionosphere, and it has a direct influence on the ionosphere potential and the electrical environment in the near space. Studies on this kind of discharge will provide an important protection for the space environment.Contact: Yang Jing
Science China Press Co., Ltd. (SCP) is a scientific journal publishing company of the Chinese Academy of Sciences (CAS). For 50 years, SCP takes its mission to present to the world the best achievements by Chinese scientists on various fields of natural sciences researches. http://www.scichina.com/
Yan Bei | EurekAlert!
A new 3D viewer for improved digital geoscience mapping
20.09.2016 | Uni Research
The significance of seaweed
16.09.2016 | King Abdullah University of Science and Technology
The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.
“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...
With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.
Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...
For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.
Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...
At AKL’16, the International Laser Technology Congress held in May this year, interest in the topic of process control was greater than expected. Appropriately, the event was also used to launch the Industry Working Group for Process Control in Laser Material Processing. The group provides a forum for representatives from industry and research to initiate pre-competitive projects and discuss issues such as standards, potential cost savings and feasibility.
In the age of industry 4.0, laser technology is firmly established within manufacturing. A wide variety of laser techniques – from USP ablation and additive...
Every three years, the plastics industry gathers at K, the international trade fair for plastics and rubber in Düsseldorf. The Fraunhofer Institute for Laser Technology ILT will also be attending again and presenting many innovative technologies, such as for joining plastics and metals using ultrashort pulse lasers. From October 19 to 26, you can find the Fraunhofer ILT at the joint Fraunhofer booth SC01 in Hall 7.
K is the world’s largest trade fair for the plastics and rubber industry. As in previous years, the organizers are expecting 3,000 exhibitors and more than...
23.09.2016 | Event News
20.09.2016 | Event News
16.09.2016 | Event News
23.09.2016 | Life Sciences
23.09.2016 | Health and Medicine
23.09.2016 | Life Sciences