Great news for drivers! They can now continue to keep the air-conditioning system on during the hot sunny days even when they stop the vehicle and switch off the engine. In collaboration with Green Power Industrial Ltd, PolyU's Department of Electrical Engineering has developed an innovative air-conditioning system for vehicles that can turn scorching summer heat into cool air without a single drop of gasoline.
Solar private car
Copyright : Partnership Development Office
Motorists are so used to turn on the engine for air-conditioning. Our solar-powered air-conditioning system for vehicles (SAV) will break this convention. Featuring photovoltaic technology and intelligent power control, SAV switches on-board air-conditioner to solar power when petrol engine shuts off, and the switch-over is automatic and seamless.
Principal investigator of this project Prof Eric Cheng explained, "Drivers of minibuses or taxis can now switch off the engine but continue to stay cool while waiting for passengers at the station. In fact, our system helps extend the operation of air-conditioner for two more hours." Prof Cheng further stressed that this device can also give good power output even during cloudy or rainy days.
Similar to a big solar charger, this system has solar photovoltaic panels on the rooftop of the vehicle to collect power for storage in a battery to support a stand-alone electric air-conditioning unit when the car engine is not running. The solar panel is made from bendy materials which can fit perfectly on any vehicle rooftop, giving it a sleek appearance. It also serves as a good thermal insulation for the interior and other valuable equipments inside the vehicle.
Idling not only pollutes the air, but is also bad for the engine as it may contaminate engine oil and accelerate the deterioration of engine components due to higher operational temperature and unnecessary prolonged operation. According to recent statistics, leaving a vehicle on idle for as short as 10 minutes a day will consume an average of 100 litres of petrol in one year . In other words, adopting our SAV can help save drivers' petrol and fuel cost.
PolyU's President Prof Timothy W. Tong hailed the device as a practical solution that could benefit thousands of professional drivers and pedestrians in the city. The installation of our SAV on a Swire Coca-Cola Hong Kong truck was first announced in October last year. A series of testing on the road have proven the system robust and effective. To make another milestone on the road to green transport, the system is now being widely deployed in public transport such as minibuses and taxis, as well as some commercial vehicles including an operation truck of the Airport Authority Hong Kong.
"We look forward to having more fruitful collaboration with Green Power Industrial Ltd and other industrial partners to build a low-carbon city. Together, we can jointly make a contribution for sustainable development of our community," said Prof Tong.As part of an on-going mission in advancing technology that safeguards natural resources and our ecosystem, SAV is the latest from a stream of PolyU's green innovations with an aim to reduce harmful emissions and eliminate the effects of climate change. This system has also brought home two international awards from the 39th International Exhibition of Inventions of Geneva in April this year. This accolade will certainly serve as recognition of the hard work, the know-how and the dedication that PolyU researchers have put in creating meaningful innovations that move us towards a sustainable society.
New algorithm for optimized stability of planar-rod objects
11.08.2016 | Institute of Science and Technology Austria
Automated driving: Steering without limits
05.02.2016 | FZI Forschungszentrum Informatik am Karlsruher Institut für Technologie
Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of light metals.
Scientists at the University of Stuttgart have now developed two new process variants that will considerably expand the areas of application for friction stir welding.
Technologie-Lizenz-Büro (TLB) GmbH supports the University of Stuttgart in patenting and marketing its innovations.
Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of...
Optical quantum computers can revolutionize computer technology. A team of researchers led by scientists from Münster University and KIT now succeeded in putting a quantum optical experimental set-up onto a chip. In doing so, they have met one of the requirements for making it possible to use photonic circuits for optical quantum computers.
Optical quantum computers are what people are pinning their hopes on for tomorrow’s computer technology – whether for tap-proof data encryption, ultrafast...
The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.
“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...
With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.
Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...
For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.
Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...
28.09.2016 | Event News
27.09.2016 | Event News
23.09.2016 | Event News
28.09.2016 | Medical Engineering
28.09.2016 | Materials Sciences
28.09.2016 | Business and Finance