Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

New hydrangea cultivars for landscape gardens

28.04.2010
Two new compact oakleaf hydrangea cultivars ideal for small gardens have been released by Agricultural Research Service (ARS) scientists.

"Ruby Slippers" and "Munchkin" are the latest cultivars released by ARS geneticist Sandy Reed with the U.S. National Arboretum's Floral and Nursery Plants Research Unit's worksite in McMinnville, Tenn. The arboretum is operated by ARS, the principal intramural scientific research agency of the U.S. Department of Agriculture (USDA).

The new cultivars are the first compact forms of Hydrangea quercifolia, a species of hydrangea native to the southeastern United States, to be released by ARS. H. quercifolia is commonly known as oakleaf hydrangea because its leaves resemble those from oak trees. According to Reed, currently available oakleaf hydrangea cultivars are taller than desired for small landscape gardens or, if shorter, don't have good flowering qualities.

Ruby Slippers and Munchkin address both of these issues. The new cultivars are small in stature and have large flower heads that stay upright, even after heavy rains. They grow 3-4 feet tall and 4-5 feet wide after nine years of growth, with flower heads held upright above their leaves, making them particularly suited for use in small residential landscapes. Flowers on Ruby Slippers open white but quickly turn pale pink and deepen into rose, while those on Munchkin open white and gradually turn medium pink. Both plants flower in early summer.

Like other oakleaf hydrangeas, Ruby Slippers and Munchkin can be grown in full sun or light shade and are hardy in USDA zones 5 to 8. They can be used in shrub borders or mass-planted in large areas. The plants have been evaluated by cooperators throughout the United States, and cooperators are currently increasing stock. Reed anticipates the plants will be widely available for sale to consumers in the next year or two.

Nursery crops are a multi-billion dollar industry. Wholesalers in 17 states surveyed by the USDA's National Agricultural Statistics Service grossed $4.65 billion in sales in 2006, the last year for which figures are available. That's an increase of 17 percent from 2003 sales. Deciduous shrubs like the oakleaf hydrangea accounted for 14 percent of the industry's total sales in 2006.

USDA is an equal opportunity provider, employer and lender. To file a complaint of discrimination, write: USDA, Director, Office of Civil Rights, 1400 Independence Ave., S.W., Washington, D.C. 20250-9410 or call (800) 795-3272 (voice), or (202) 720-6382 (TDD).

Stephanie Yao | EurekAlert!
Further information:
http://www.usda.gov

More articles from Agricultural and Forestry Science:

nachricht Farming with forests
23.09.2016 | University of Illinois College of Agricultural, Consumer and Environmental Sciences (ACES)

nachricht Ecological intensification of agriculture
09.09.2016 | Julius-Maximilians-Universität Würzburg

All articles from Agricultural and Forestry Science >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: New welding process joins dissimilar sheets better

Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of light metals.
Scientists at the University of Stuttgart have now developed two new process variants that will considerably expand the areas of application for friction stir welding.
Technologie-Lizenz-Büro (TLB) GmbH supports the University of Stuttgart in patenting and marketing its innovations.

Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of...

Im Focus: First quantum photonic circuit with electrically driven light source

Optical quantum computers can revolutionize computer technology. A team of researchers led by scientists from Münster University and KIT now succeeded in putting a quantum optical experimental set-up onto a chip. In doing so, they have met one of the requirements for making it possible to use photonic circuits for optical quantum computers.

Optical quantum computers are what people are pinning their hopes on for tomorrow’s computer technology – whether for tap-proof data encryption, ultrafast...

Im Focus: OLED microdisplays in data glasses for improved human-machine interaction

The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.

“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...

Im Focus: Artificial Intelligence Helps in the Discovery of New Materials

With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.

Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...

Im Focus: Complex hardmetal tools out of the 3D printer

For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.

Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

HLF: From an experiment to an establishment

29.09.2016 | Event News

European Health Forum Gastein 2016 kicks off today

28.09.2016 | Event News

Laser use for neurosurgery and biofabrication - LaserForum 2016 focuses on medical technology

27.09.2016 | Event News

 
Latest News

New Multiferroic Materials from Building Blocks

29.09.2016 | Materials Sciences

Silicon Fluorescent Material Developed Enabling Observations under a Bright “Biological Optical Window”

29.09.2016 | Materials Sciences

X-shape Bio-inspired Structures

29.09.2016 | Interdisciplinary Research

VideoLinks
B2B-VideoLinks
More VideoLinks >>>