A light in the dark: How the trajectory of protons is made visible
In-beam MRI of the 2nd (current) generation.
Source: Stephan Wiegand / Hochschulmedizin Dresden
The aim of proton radiation therapy in fighting cancer is to kill as many tumor cells as possible while also protecting the surrounding healthy tissue. As there is yet no direct method for mapping the beam range during dose delivery, physicians work with safety margins around the tumor that affect the conformity of dose distribution and reduce accurate targeting. Dresden scientists led by Prof. Aswin L. Hoffmann have succeeded in visualizing the proton beam’s trajectory in a fluid-filled phantom using an “in-beam MRI” prototype. By utilizing this method they revealed the proton beam’s range during irradiation. (Proceedings of the National Academy of Science – DOI: 10.1073/pnas.2301160120).
In contrast to photons, protons possess an important advantage: they have a defined range—that is, a point at which they release their maximum energy. In proton radiation therapy, this property makes it possible to stop the radiation within the tumor tissue and apply a high dose of radiation in that area, while at the same time greatly reducing the dose delivered to the surrounding healthy tissue. Proton radiation therapy is therefore mainly used to treat children, but also adults with tumors located near normal tissue that is highly sensitive to radiation. To control dose delivery, a direct method is required that measures and images the beam’s range in relation to the patient’s anatomy during irradiation. Because such a method is yet unavailable, safety margins have so far been used around the tumor tissue, which leads to irradiation of normal tissue and limits the maximum possible dose in the tumor.
Source: Stephan Wiegand / Hochschulmedizin Dresden
The group led by Hoffmann has been researching the technical integration of magnetic resonance imaging (MRI) and proton therapy since 2016. Using an “in-beam MRI” prototype, Hoffman and his group have succeeded for the first time in the world in visualizing the proton beam in a fluid-filled phantom and in using this method to reveal the proton beam’s range during radiation. “The result of our work could significantly alter the quality assurance of proton therapy. Previously, measurements were often made indirectly, but now proton beam imaging can occur directly during dose application,” Hoffman explains. “My dream is to be able to apply this method in the future for monitoring patient treatments.”
The study demonstrated the feasibility of proton beam visualization in liquid media. As predicted, the MRI images obtained during irradiation showed that the penetration depth increased with increasing proton energy, and therefore the strength of the MRI signal also increased with the increasing proton current. “This result is an important step in image-guided proton therapy,” says Prof. Mechthild Krause, director of OncoRay. “Real-time MRI imaging has already made its way into conventional photon radiotherapy. Professor Hoffmann and his team are working on a prototype for a new irradiation device that should also establish real-time MRI imaging in proton therapy.”
The results from Hoffmann’s group provide hope that a new dimension in cancer patient treatment will be possible. Currently, a new large-scale MRI system is being installed in the OncoRay building. This will make it possible for the first time to perform proton irradiation and real-time MRI simultaneously, while it will also provide the ability to vary direction and strength of the magnetic field relative to the patient. This could enable a more precise use of proton therapy in a few years for mobile tumors in that it will even better preserve the healthy tissue and will irradiate the tumor tissue with a higher dosage.
Wissenschaftliche Ansprechpartner:
Prof. Aswin L. Hoffmann I Institute of Radiooncology – OncoRay (HZDR) and Department of Radiotherapy and Radiooncology (University Hospital Carl Gustav Carus at TU Dresden)
Phone: +49 (0)351 458-3932 I Email: aswin.hoffmann@ukdd.de
Originalpublikation:
Sebastian Gantz, Leonhard Karsch, Jörg Pawelke, Juliane Peter, Sonja Schellhammer, Julien Smeets, Erik van der Kraaij and Aswin Hoffmann: Direct visualization of proton beam irradiation effects in liquids by MRI, Proceedings of the National Academy of Science, 2023, DOI: 10.1073/pnas.2301160120
Media Contact
All latest news from the category: Medical Engineering
The development of medical equipment, products and technical procedures is characterized by high research and development costs in a variety of fields related to the study of human medicine.
innovations-report provides informative and stimulating reports and articles on topics ranging from imaging processes, cell and tissue techniques, optical techniques, implants, orthopedic aids, clinical and medical office equipment, dialysis systems and x-ray/radiation monitoring devices to endoscopy, ultrasound, surgical techniques, and dental materials.
Newest articles
Webb captures top of iconic horsehead nebula in unprecedented detail
NASA’s James Webb Space Telescope has captured the sharpest infrared images to date of a zoomed-in portion of one of the most distinctive objects in our skies, the Horsehead Nebula….
Cost-effective, high-capacity, and cyclable lithium-ion battery cathodes
Charge-recharge cycling of lithium-superrich iron oxide, a cost-effective and high-capacity cathode for new-generation lithium-ion batteries, can be greatly improved by doping with readily available mineral elements. The energy capacity and…
Novel genetic plant regeneration approach
…without the application of phytohormones. Researchers develop a novel plant regeneration approach by modulating the expression of genes that control plant cell differentiation. For ages now, plants have been the…
