One last time on Earth it has been turned on in France in December 2019. The next time the MOMA laser developed by the Laser Zentrum Hannover e.V. (LZH) is going into operation will be on Mars. The ExoMars rover into which the laser is integrated has now successfully passed the thermal vacuum tests at Airbus in Toulouse, France.
For 18 days the ExoMars rover Rosalind Franklin was subjected to thermal vacuum tests at Airbus. There, it had to withstand strong changes in temperature and vacuum. The tests at Airbus imitate the conditions on Mars and simulate two hot and two cold Mars days. These so-called sols last approximately 24 hours.
Turned on for the last time on Earth: the MOMA laser integrated into the flight model of the mass spectrometer in the NASA Goddard Space Flight Center.
Searching for traces of life
The LZH laser is a central component of the Mars Organic Molecule Analyzer (MOMA) measuring instrument, which is installed in the rover's Analytical Lab Drawer (ALD).
The MOMA laser is supposed to bring soil samples into gas phase on Mars. The probe will then be analyzed with a mass spectrometer to examine the sample’s molecular composition. If the rover were to find organic molecules, it could be an indication of past life on Mars.
Small, light and very robust laser
The solid-state laser head is diode-pumped and emits in the UV spectral range with a wavelength of 266 nm. It is the first laser for space applications with this UV wavelength. It has an adjustable laser pulse energy of up to 130 µJ. Its special properties are however weight, size and above all its robustness. With a length of about 20 cm, it only weighs about 220 g.
Planned mission start in summer 2020
Having successfully past the tests, the rover will now be integrated into the landing module of the overall system. For this purpose, it will travel to Cannes in the next few weeks. Its last stop on Earth is Baikonur in Kazakhstan, from where the ExoMars mission will start probably in July or August next year.
Additionally, the LZH has recently delivered the flight spare model of the laser to NASA, where it is currently being built into the flight spare model of the MOMA instrument. These models serve to simulate and correct possible errors on Earth.
ExoMars is an astrobiology project of the European Space Agency ESA in cooperation with the Russian space agency Roskosmos with the participation of NASA.
The laser development is funded by the space agency of the German Aerospace Center with funds from the Federal Ministry of Economics and Technology based on a decision of the German Bundestag under the grant numbers 50QX1002 and 50QX1402.
Lena Bennefeld | Laser Zentrum Hannover e.V.
Spintronics: Researchers show how to make non-magnetic materials magnetic
06.08.2020 | Martin-Luther-Universität Halle-Wittenberg
Manifestation of quantum distance in flat band materials
05.08.2020 | Institute for Basic Science
Scientists at the Fraunhofer Institute for Laser Technology ILT have come up with a striking new addition to contact stamping technologies in the ERDF research project ScanCut. In collaboration with industry partners from North Rhine-Westphalia, the Aachen-based team of researchers developed a hybrid manufacturing process for the laser cutting of thin-walled metal strips. This new process makes it possible to fabricate even the tiniest details of contact parts in an eco-friendly, high-precision and efficient manner.
Plug connectors are tiny and, at first glance, unremarkable – yet modern vehicles would be unable to function without them. Several thousand plug connectors...
An international research team has found a new approach that may be able to reduce bone loss in osteoporosis and maintain bone health.
Osteoporosis is the most common age-related bone disease which affects hundreds of millions of individuals worldwide. It is estimated that one in three women...
Traditional single-cell sequencing methods help to reveal insights about cellular differences and functions - but they do this with static snapshots only...
“Core-shell” clusters pave the way for new efficient nanomaterials that make catalysts, magnetic and laser sensors or measuring devices for detecting electromagnetic radiation more efficient.
Whether in innovative high-tech materials, more powerful computer chips, pharmaceuticals or in the field of renewable energies, nanoparticles – smallest...
An international research team with Prof. Cornelia Denz from the Institute of Applied Physics at the University of Münster develop for the first time light fields using caustics that do not change during propagation. With the new method, the physicists cleverly exploit light structures that can be seen in rainbows or when light is transmitted through drinking glasses.
Modern applications as high resolution microsopy or micro- or nanoscale material processing require customized laser beams that do not change during...
23.07.2020 | Event News
21.07.2020 | Event News
07.07.2020 | Event News
06.08.2020 | Earth Sciences
06.08.2020 | Power and Electrical Engineering
06.08.2020 | Life Sciences