Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

How do rotor blades deform in wind gusts?

17.02.2020

In the research project TurbuMetric, scientists from the Jade University of Applied Sciences, the University of Oldenburg and the University of Applied Sciences Emden/Leer are investigating how wind turbines deform during turbulent inflow conditions.

In the research project TurbuMetric, scientists from the Jade University of Applied Sciences, the University of Oldenburg and the University of Applied Sciences Emden/Leer are investigating how wind turbines deform during turbulent inflow conditions.


Flow field over the rotor blade of a model wind turbine. The circle marks the stall, which is the point where the flow starts to detach

Graphic: T. Wester, ForWind


Experimental setup for determining the flow around a rotating blade of the model wind turbine

Photo: J. Puczylowski, ForWind

"The aim of our project is to develop measurement methods that show the deformation of the rotor blades while simultaneously measuring the wind field," says project leader Prof. Dr. Thomas Luhmann from the Jade University.

"This knowledge will help to improve strategies for reducing loads and extending the service life of the rotor blades or to design new blades that operate well even in turbulent flows". There are already findings on the behavior of rotor blades in normal wind, but no suitable methods are available yet for measuring the behavior in extreme gusty wind situations.

First measurements in the wind tunnel

The scientists have now carried out first experimental tests in the large wind tunnel of the Center for Wind Energy Research (ForWind) at the Institute of Physics at the University of Oldenburg.

This large research device, which is unique in its dimensions and characteristics, allows the researchers to generate turbulence in a controlled way and thus study realistic wind fields and their interaction with wind turbines.

For the measurements the scientists use a model wind turbine with rotor blades of 90 centimeters in length – about 70 times smaller than in reality. The blades run at 600 rotations per minute, so that the tip of the blade reaches a speed of 57 meters per second.

"We therefore have to develop a highly dynamic measuring method that covers the entire surface of the rotor blade and works in a non-contact way so that the measurements are not affected," explains Luhmann.

Make tiny particles visible and detect them

In order to be able to measure turbulent flow and deformation of the rotor blades simultaneously, two methods are combined: The Particle Image Velocimetry (PIV) method and photogrammetric measurements.

With the PIV method, a laser makes tiny particles visible, which are added to the air. High-speed cameras record the movements of the passing particles and the change of their positions from one image to the next is used to calculate flow direction and velocity.

Each camera takes up to 12,000 images per second, which results in a very high temporal and spatial resolution. "Of particular interest is, when and how the flow detaches from the rotating blade and which wind situations lead to the largest impacts and thus to the greatest dynamic loads on the components of the wind turbine," explains Dr. Gerd Gülker, who is leading the sub-project at ForWind.

The PIV method is combined with photogrammetric measurements. Four high-speed cameras observe the entire wind rotor and capture 200 images per second. "From the recorded image data, we can derive 3D point clouds and determine their deformations," explains Simon Nietiedt, researcher at the Jade University.

"The result provides data for the entire surface of the rotor blades and is highly accurate – despite the high dynamics of the measured object". The scientists face the challenge to combine both systems in such a way that all data is represented in one system in a temporally and geometrically correct way.

About the project

The research project "TurbuMetric – Optical 3D measurement techniques for the acquisition of dynamic fluid-structure interactions in turbulent wind environments" is a joint project of the Jade University of Applied Sciences, the University of Oldenburg and the University of Applied Sciences Emden/Leer. Starting in 2018 it is granted for three years by the Lower Saxony Ministry of Science and funded by the European Regional Development Fund (EFRE) with around 1.3 million euros.

Wissenschaftliche Ansprechpartner:

Prof. Dr. Thomas Luhmann, luhmann@jade-hs.de, 0441 7708 - 3172
Dr. Gerd Gülker, gerd.guelker@uol.de, 0441 798 - 3511

Katrin Keller | idw - Informationsdienst Wissenschaft
Further information:
http://www.jade-hs.de

Further reports about: rotor blades tiny particles wind tunnel wind turbine wind turbines

More articles from Physics and Astronomy:

nachricht Spintronics: Researchers show how to make non-magnetic materials magnetic
06.08.2020 | Martin-Luther-Universität Halle-Wittenberg

nachricht Manifestation of quantum distance in flat band materials
05.08.2020 | Institute for Basic Science

All articles from Physics and Astronomy >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: ScanCut project completed: laser cutting enables more intricate plug connector designs

Scientists at the Fraunhofer Institute for Laser Technology ILT have come up with a striking new addition to contact stamping technologies in the ERDF research project ScanCut. In collaboration with industry partners from North Rhine-Westphalia, the Aachen-based team of researchers developed a hybrid manufacturing process for the laser cutting of thin-walled metal strips. This new process makes it possible to fabricate even the tiniest details of contact parts in an eco-friendly, high-precision and efficient manner.

Plug connectors are tiny and, at first glance, unremarkable – yet modern vehicles would be unable to function without them. Several thousand plug connectors...

Im Focus: New Strategy Against Osteoporosis

An international research team has found a new approach that may be able to reduce bone loss in osteoporosis and maintain bone health.

Osteoporosis is the most common age-related bone disease which affects hundreds of millions of individuals worldwide. It is estimated that one in three women...

Im Focus: AI & single-cell genomics

New software predicts cell fate

Traditional single-cell sequencing methods help to reveal insights about cellular differences and functions - but they do this with static snapshots only...

Im Focus: TU Graz Researchers synthesize nanoparticles tailored for special applications

“Core-shell” clusters pave the way for new efficient nanomaterials that make catalysts, magnetic and laser sensors or measuring devices for detecting electromagnetic radiation more efficient.

Whether in innovative high-tech materials, more powerful computer chips, pharmaceuticals or in the field of renewable energies, nanoparticles – smallest...

Im Focus: Tailored light inspired by nature

An international research team with Prof. Cornelia Denz from the Institute of Applied Physics at the University of Münster develop for the first time light fields using caustics that do not change during propagation. With the new method, the physicists cleverly exploit light structures that can be seen in rainbows or when light is transmitted through drinking glasses.

Modern applications as high resolution microsopy or micro- or nanoscale material processing require customized laser beams that do not change during...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

VideoLinks
Industry & Economy
Event News

“Conference on Laser Polishing – LaP 2020”: The final touches for surfaces

23.07.2020 | Event News

Conference radar for cybersecurity

21.07.2020 | Event News

Contact Tracing Apps against COVID-19: German National Academy Leopoldina hosts international virtual panel discussion

07.07.2020 | Event News

 
Latest News

Rare Earth Elements in Norwegian Fjords?

06.08.2020 | Earth Sciences

Anode material for safe batteries with a long cycle life

06.08.2020 | Power and Electrical Engineering

Turning carbon dioxide into liquid fuel

06.08.2020 | Life Sciences

VideoLinks
Science & Research
Overview of more VideoLinks >>>