Automated finishing for tool making processes – Robots remove milling traces from forming tools
Linear grinding of a milled workpiece by a robot<br>Foto: Fraunhofer IPT<br>
During the EuroMold 2011 tool and die making trade fair, the Fraunhofer IPT will be presenting this robot-based processing plant at the joint Fraunhofer booth C66 in Hall 11.
Transferring manual dexterity to a robot
The Fraunhofer IPT’s automated plant uses a lineal grinding motion to remove the milling traces that arises when manufacturing forming tools and molds. The manufacturing unit on display at the trade fair consists of a conventional industrial robot and a pneumatic smoothing tool in which the processing movements and the forces acting on the workpiece are introduced and controlled via air pressure. The processing path is programmed using the so-called “CAx-Framework” software especially developed by the Fraunhofer IPT.
Without the right tool holder or process parameters for the robot to reproduce the manual dexterity and the experience of a human operator, it was virtually impossible to automate the smoothing and brush polishing processes on freeform mold surfaces. As part of the “Green Carbody Technologies Innovation Alliance” (InnoCaT), the engineers in Aachen therefore performed scientific investigations to find the right processing methods and tools for different materials and geometries. A comparison of the results of an optical component measurement with the original design data then provided the basis for developing the optimum processing strategy for automated finishing operations.
The plan is to continue developing the system in order to fully automate the processing of free form tools both with robots as well as in milling machines.
The “Green Carbody Technologies Innovation Alliance” is an association of over 60 companies and scientific institutes that aims to make automotive manufacturing more energy and resource efficient. As part of this alliance, the Fraunhofer IPT develops new tool and mold manufacturing systems together with its industrial partners in order to reduce the resource consumption and manufacturing costs involved in component production.
Contact
Dipl.-Ing. Dennis Andrecht
Fraunhofer Institute for
Production Technology IPT
Steinbachstr. 17
52074 Aachen
Germany
Telephone +49 241 8904-718
Fax +49 241 8904-6718
dennis.andrecht@ipt.fraunhofer.de
Media Contact
More Information:
http://www.ipt.fraunhofer.deAll latest news from the category: Machine Engineering
Machine engineering is one of Germany’s key industries. The importance of this segment has led to the creation of new university degree programs in fields such as production and logistics, process engineering, vehicle/automotive engineering, production engineering and aerospace engineering among others.
innovations-report offers informative reports and articles covering technologies such as automation, motion, power train, energy, conveyor, plastics, lightweight construction, logistics/warehousing, measurement systems, machine tools and control engineering.
Newest articles
A universal framework for spatial biology
SpatialData is a freely accessible tool to unify and integrate data from different omics technologies accounting for spatial information, which can provide holistic insights into health and disease. Biological processes…
How complex biological processes arise
A $20 million grant from the U.S. National Science Foundation (NSF) will support the establishment and operation of the National Synthesis Center for Emergence in the Molecular and Cellular Sciences (NCEMS) at…
Airborne single-photon lidar system achieves high-resolution 3D imaging
Compact, low-power system opens doors for photon-efficient drone and satellite-based environmental monitoring and mapping. Researchers have developed a compact and lightweight single-photon airborne lidar system that can acquire high-resolution 3D…
