Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Electric pulses precisely shape 3D-printed metal parts

28.05.2020

Professor Dirk Bähre and his research team at Saarland University have developed a non-contact method of transforming metal parts fabricated by a 3D printer into high-precision technical components for specialist applications. The novel method enables them to process parts made from strong, lightweight metals to produce precision-finished components with complex geometries and dimensional tolerances of a few thousandths of a millimetre. The team of manufacturing technologists combine metal 3D printing and electrochemical machining (ECM).

Complex technical systems like the engines that power cars, planes or rockets are made from a large number of highly specialized metal components. To ensure that all of these parts fit together perfectly and are able to withstand extreme mechanical stresses, each and every one of them has to be manufactured very precisely.


Professor Dirk Bähre (l., here with Stefan Wilhelm from his research group) and his team of researchers at Saarland University are specialists in the field of precision machining and finishing.

Oliver Dietze

‘Tolerances can be down in the micrometre range,’ explains Professor Dirk Bähre from Saarland University. While metal 3D printing is now an established means of fabricating components with complex geometries, these additive processes, which build up the part layer by layer, are not sufficiently precise for components that have to meet extremely strict dimensional requirements.

And in some cases, the geometry of the part may be too complex to be produced by conventional metal 3D printing.

Dirk Bähre and his research team have set themselves the goal of refining the workpieces from the 3D printer so that their dimensions are correct down to a few thousandths of a millimetre. ‘Our technology for post-processing additively manufactured metal parts offers a cost-effective means of producing high-precision functional surfaces for applications where extremely tight tolerances are crucial.

It enables large numbers of parts to be post-processed efficiently and economically,’ says Bähre. He and his team of researchers at Saarland University are specialists in the field of precision machining and finishing. They have developed novel techniques in which they combine metal 3D printing with electrochemical machining.

By removing material electrochemically, even the most complex geometries can be created in the hardest of metals. ‘Our non-destructive, non-contact manufacturing technology enables us to efficiently machine parts with intricate geometries even when made from high-strength materials,’ explains Bähre.

The workpieces, which are bathed in a flowing electrolyte solution, can be electrochemically machined to the required geometry working to tolerances of a few thousandths of a millimetre – without any mechanical contact and without imparting any mechanical stresses to the workpiece.

All the engineers need is a source of electrical power. A high electric current flows between a tool (the cathode) and the conductive workpiece (the anode), which has been produced in a 3D printing process. The workpiece is immersed in a conducting fluid (the electrolyte), which is simply an aqueous salt solution. The electrochemical machining process causes minute particles of metals to be removed from the surface of the workpiece.

The metal atoms on the surface of the workpiece enter the solution as positively charged metal ions enabling the workpiece to very precisely attain the required geometric form. ‘By adjusting the duration of the current pulses and the vibration of the tool, we can remove surface material very uniformly leaving particularly smooth surfaces and achieving high dimensional precision,’ says Bähre.

The researchers rigorously examine not only the metals used, such as aluminium, titanium or steel alloys, but also the individual process steps involved. ‘Optimizing post-processing requires a thorough understanding of both the material and the process. We need to know, for example, exactly what happened to the metal during the preceding 3D printing stage.

That’s why we carefully study the microstructure of the metal produced in the 3D printing process. By meticulously examining both process technology and material behaviour, we can improve and optimize the electrochemical methods in order to obtain even smoother surfaces or more complex geometries at even higher levels of precision,’ explains Dirk Bähre.

The team carries out a large number of experiments in which they first fabricate the metal part using 3D printing technology and then determine how the subsequent electrochemical machining stage can be optimized to yield the required results. ‘We examine in detail how the different material and process parameters interact and then determine how the overall production process should be configured,’ explains Bähre.

In some cases, for instance, the order in which the process steps are performed proves to be critical. The researchers conduct a systematic analysis of all the influencing parameters, performing highly-precise measurements and detailed analyses. As a result, the engineers have numerous means of fine-tuning the manufacturing process and tailoring the process parameters to meet application requirements.

The research projects, some of which are funded the European Regional Development Fund, are often collaborative in nature, with Dirk Bähre and his research group working closely with partners from business and industry.

Contact: Prof. Dr.-Ing. Dirk Bähre, Department of Production Engineering:
Tel.: +49 (0)681 302-3075; Email: d.baehre@mx.uni-saarland.de
http://www.lft.uni-saarland.de/de/home.html

More Press photographs are available at https://www.uni-saarland.de/universitaet/aktuell/artikel/nr/21918.html and can be used at no charge.

Wissenschaftliche Ansprechpartner:

Prof. Dr.-Ing. Dirk Bähre, Department of Production Engineering:
Tel.: +49 (0)681 302-3075; Email: d.baehre@mx.uni-saarland.de

Claudia Ehrlich | Universität des Saarlandes
Further information:
http://www.uni-saarland.de

More articles from Power and Electrical Engineering:

nachricht Understanding the love-hate relationship of halide perovskites with the sun
13.07.2020 | Eindhoven University of Technology

nachricht Wanted: The best Storage Battery
13.07.2020 | Empa - Eidgenössische Materialprüfungs- und Forschungsanstalt

All articles from Power and Electrical Engineering >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Electron cryo-microscopy: Using inexpensive technology to produce high-resolution images

Biochemists at Martin Luther University Halle-Wittenberg (MLU) have used a standard electron cryo-microscope to achieve surprisingly good images that are on par with those taken by far more sophisticated equipment. They have succeeded in determining the structure of ferritin almost at the atomic level. Their results were published in the journal "PLOS ONE".

Electron cryo-microscopy has become increasingly important in recent years, especially in shedding light on protein structures. The developers of the new...

Im Focus: The spin state story: Observation of the quantum spin liquid state in novel material

New insight into the spin behavior in an exotic state of matter puts us closer to next-generation spintronic devices

Aside from the deep understanding of the natural world that quantum physics theory offers, scientists worldwide are working tirelessly to bring forth a...

Im Focus: Excitation of robust materials

Kiel physics team observed extremely fast electronic changes in real time in a special material class

In physics, they are currently the subject of intensive research; in electronics, they could enable completely new functions. So-called topological materials...

Im Focus: Electrons in the fast lane

Solar cells based on perovskite compounds could soon make electricity generation from sunlight even more efficient and cheaper. The laboratory efficiency of these perovskite solar cells already exceeds that of the well-known silicon solar cells. An international team led by Stefan Weber from the Max Planck Institute for Polymer Research (MPI-P) in Mainz has found microscopic structures in perovskite crystals that can guide the charge transport in the solar cell. Clever alignment of these "electron highways" could make perovskite solar cells even more powerful.

Solar cells convert sunlight into electricity. During this process, the electrons of the material inside the cell absorb the energy of the light....

Im Focus: The lightest electromagnetic shielding material in the world

Empa researchers have succeeded in applying aerogels to microelectronics: Aerogels based on cellulose nanofibers can effectively shield electromagnetic radiation over a wide frequency range – and they are unrivalled in terms of weight.

Electric motors and electronic devices generate electromagnetic fields that sometimes have to be shielded in order not to affect neighboring electronic...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

VideoLinks
Industry & Economy
Event News

Contact Tracing Apps against COVID-19: German National Academy Leopoldina hosts international virtual panel discussion

07.07.2020 | Event News

International conference QuApps shows status quo of quantum technology

02.07.2020 | Event News

Dresden Nexus Conference 2020: Same Time, Virtual Format, Registration Opened

19.05.2020 | Event News

 
Latest News

Black phosphorus-based van der Waals heterostructures for mid-infrared light-emission applications

13.07.2020 | Physics and Astronomy

Polarization of Br2 molecule in vanadium oxide cluster cavity and new alkane bromination

13.07.2020 | Life Sciences

Researchers present concept for a new technique to study superheavy elements

13.07.2020 | Life Sciences

VideoLinks
Science & Research
Overview of more VideoLinks >>>