Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Updated sleep apnea screening recommended for commercial drivers

14.09.2006
Joint recommendations help determine risk of impairment for drivers

New recommendations released today by a joint task force of the American College of Chest Physicians (ACCP), American College of Occupational and Environmental Medicine (ACOEM), and the National Sleep Foundation (NSF) offer an updated and consistent approach to the screening and management of obstructive sleep apnea (OSA) among commercial motor vehicle (CMV) operators.

Published as a supplement to the September issue of the Journal of Occupational and Environmental Medicine, these recommendations include a more thorough screening and evaluation process, modified criteria for returning to work after treatment, and provide follow-up and recertification recommendations.

"Sleepiness and inattention contribute to a significant number of CMV crashes each year and OSA has been shown to significantly increase a driver's risk of driving drowsy. Yet, current CMV screening and treatment procedures for OSA are ambiguous and not reflective of the latest advancements in the diagnosis and management of OSA," said Nancy Collop, MD, FCCP, Sleep Institute, American College of Chest Physicians. "Conflicting approaches to screening and management of OSA have left drivers undiagnosed, which puts the driver and general public at risk. We hope our joint recommendations will assist the Federal Motor Carrier Safety Administration and states to update screening and treatment guidelines for sleep apnea which, in turn, may help identify and treat more CMV drivers who suffer from this serious condition."

Guidelines for the diagnosis and treatment of sleep apnea from the Federal Motor Carrier Safety Administration (FMCSA) are based on a 1991 report sponsored by the Federal Highway Administration. Current FMCSA guidance for certification cites that drivers must have "no established medical history or clinical diagnosis of respiratory dysfunction likely to interfere with the ability to control and drive a commercial motor vehicle."

New recommendations are based on an extensive review of the latest sleep apnea research and existing medical guidelines related to OSA from the US Department of Transportation agencies. Recommendations provide an updated description of sleep apnea, based on how sleep apnea is currently defined by professional organizations and other federal agencies. Patients with sleep apnea include those with repetitive partial or complete obstruction of upper airway tissues during sleep, resulting in sleep disruption, gas exchange abnormalities, and cardiovascular changes. In addition, sleep experts advise that the diagnosis and severity of sleep apnea be established using the apnea-hypopnea index.

The joint task force also suggests a screening process that bases driver certification on severity of sleep apnea. These recommendations suggest certifying a driver at lower risk for sleep apnea for a maximum of 3 months, pending a medical evaluation (in-service evaluations), while drivers with more severe risk factors or a motor vehicle crash likely related to sleep disturbances should be prohibited from returning to work until they receive a medical evaluation (out-of-service evaluations). Furthermore, the task force suggests expanding the screening process to include a more extensive medical and physical history, flagging such risk factors as body mass index, neck circumference, family history of OSA, and history of comorbidities. For those diagnosed with sleep apnea, experts strongly recommend using positive airway pressure for a minimum of 4 hours within a 24-hour period via a machine that is able to measure time on pressure. Current guidelines do not specify minimum use of positive airway pressure.

"Difficulty in identifying those drivers at highest risk of OSA and accidents due to OSA has been a significant challenge for the commercial driver medical examiner. In addition, outdated guidance from the FMCSA has left medical examiners in conflict with current sleep guidelines," said Natalie P. Hartenbaum, MD, MPH, FACOEM, American College of Occupational and Environmental Medicine. "With recommendations based on current literature, and accepted by both occupational medicine and sleep medical organizations, a more consistent process for medical certification of these drivers can occur, decreasing the risk of accidents."

Although the task force recommends more thorough screening, their recommendations suggest a shorter return-to-work time. Under current FMCSA guidelines, CMV operators who are being treated for sleep apnea can return to work a minimum of one month after initiation of treatment. The task force's recommendations include reducing return-to-work time to two weeks after treatment initiation in certain situations. Reevaluation after four weeks to ensure compliance with therapy and improvement in symptoms is also recommended.

"Sleep apnea is a highly treatable disorder. The new return-to-work standards we suggest are more reflective of current clinical knowledge related to the treatment of sleep apnea," said Barbara Phillips, MD, FCCP, National Sleep Foundation. "With appropriate therapy and compliance, drivers who suffer from sleep apnea will be addressing a significant risk for impaired performance on the job."

A study sponsored by the FMCSA and the American Trucking Associations estimated that nearly one in three commercial truck drivers suffers from mild to severe OSA1. The study found that the risk of having sleep apnea depended on two major factors - age and degree of obesity - with prevalence increasing with both. Population projections by FMCSA indicate the number of older drivers will increase by 50% over the next twenty years. Other research demonstrates that drivers with undiagnosed OSA have an increased risk (2 to 7 times) for falling asleep at the wheel. It also increases the possibility of an individual developing significant health problems, such as hypertension, stroke, and ischemic heart disease.

Jennifer Stawarz | EurekAlert!
Further information:
http://www.chestnet.org

More articles from Health and Medicine:

nachricht Antibiotic effective against drug-resistant bacteria in pediatric skin infections
17.02.2017 | University of California - San Diego

nachricht Tiny magnetic implant offers new drug delivery method
14.02.2017 | University of British Columbia

All articles from Health and Medicine >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Breakthrough with a chain of gold atoms

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

Im Focus: DNA repair: a new letter in the cell alphabet

Results reveal how discoveries may be hidden in scientific “blind spots”

Cells need to repair damaged DNA in our genes to prevent the development of cancer and other diseases. Our cells therefore activate and send “repair-proteins”...

Im Focus: Dresdner scientists print tomorrow’s world

The Fraunhofer IWS Dresden and Technische Universität Dresden inaugurated their jointly operated Center for Additive Manufacturing Dresden (AMCD) with a festive ceremony on February 7, 2017. Scientists from various disciplines perform research on materials, additive manufacturing processes and innovative technologies, which build up components in a layer by layer process. This technology opens up new horizons for component design and combinations of functions. For example during fabrication, electrical conductors and sensors are already able to be additively manufactured into components. They provide information about stress conditions of a product during operation.

The 3D-printing technology, or additive manufacturing as it is often called, has long made the step out of scientific research laboratories into industrial...

Im Focus: Mimicking nature's cellular architectures via 3-D printing

Research offers new level of control over the structure of 3-D printed materials

Nature does amazing things with limited design materials. Grass, for example, can support its own weight, resist strong wind loads, and recover after being...

Im Focus: Three Magnetic States for Each Hole

Nanometer-scale magnetic perforated grids could create new possibilities for computing. Together with international colleagues, scientists from the Helmholtz Zentrum Dresden-Rossendorf (HZDR) have shown how a cobalt grid can be reliably programmed at room temperature. In addition they discovered that for every hole ("antidot") three magnetic states can be configured. The results have been published in the journal "Scientific Reports".

Physicist Dr. Rantej Bali from the HZDR, together with scientists from Singapore and Australia, designed a special grid structure in a thin layer of cobalt in...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Booth and panel discussion – The Lindau Nobel Laureate Meetings at the AAAS 2017 Annual Meeting

13.02.2017 | Event News

Complex Loading versus Hidden Reserves

10.02.2017 | Event News

International Conference on Crystal Growth in Freiburg

09.02.2017 | Event News

 
Latest News

Biocompatible 3-D tracking system has potential to improve robot-assisted surgery

17.02.2017 | Medical Engineering

Real-time MRI analysis powered by supercomputers

17.02.2017 | Medical Engineering

Antibiotic effective against drug-resistant bacteria in pediatric skin infections

17.02.2017 | Health and Medicine

VideoLinks
B2B-VideoLinks
More VideoLinks >>>