Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Portable kidney dialysis machine developed

03.02.2004


A Portland company is using an emerging microtechnology from Oregon State University to develop a portable kidney dialysis machine that will make in-home treatment a reality, enabling hundreds of thousands of people afflicted with kidney failure to treat themselves at home instead of traveling to dialysis clinics three days a week.



"Current dialysis machines are based on 30-year-old technology and employ filter systems that are only about 28 percent efficient," said Michael Baker, chief executive officer of Home Dialysis Plus, the firm developing the device.

"By employing the microtechnology being developed at OSU’s College of Engineering, the filter efficiency skyrockets to about 90 percent," Baker said. "And we’re able to reduce the dimensions of a dialysis machine from the size of a refrigerator to the size of a piece of carry-on luggage, which makes treatment portable."


Baker said that more than 600 jobs could be associated with the device when production begins.

OSU researchers and Home Dialysis Plus officials say the reduced size and increased efficiency will improve the lives of dialysis patients because treatments will be done in the home while patients are asleep at night. Many dialysis patients now have to limit travel and other opportunities due to time-consuming treatments that can take up to four hours.

"A growing number of studies indicate that longer and/or more frequent in-home dialysis offers not only superior therapy, but also the opportunity to reduce costs," Baker said. "These revelations are prompting more and more dialysis patients to demand the health benefits, the convenience, and the quality of life that in-home dialysis has to offer. We launched Home Dialysis Plus to give dialysis patients the life-improving technology they’ve been asking for."

Home Dialysis Plus was founded by Altman Browning and Company, a Portland product development firm that has been working closely with researchers at the OSU College of Engineering to develop the new microtechnology for use in the dialysis application. Researchers say the technology, known as multiscale materials and devices, or MMD, could eventually enable development of a wearable dialysis device, or even an implantable version.

"MMD technology is allowing us to reduce a filter that is more than eight inches tall by three inches in diameter to the size of about four sugar cubes," Baker said. "As this technology develops, the possibility of an implantable dialysis device becomes very real."

Jim Curtis, a certified hemodialysis technologist, works as area manager for Fresenius Medical Care North America, a company that operates 11 dialysis clinics throughout Oregon. He said that "MMD technology has the potential to revolutionize the artificial kidney because it enables such good surface area in such a small space. Many studies show that patients are better off dialyzing less rapidly, but over a longer period of time."

Citing a recent Canadian study that compared patients who underwent traditional dialysis treatments (three times a week for approximately four hours) to patients who underwent nocturnal dialysis (eight hours of dialysis nightly), Curtis said recovery time following treatment was reduced from approximately six hours to about seven minutes.

"Nocturnal dialysis gives patients more time in their lives because they spend this time sleeping anyway," Curtis said. "And they don’t have to spend hours every week feeling washed out or nauseous before and after treatments."

The leading causes of kidney failure are diabetes and hypertension, Curtis said. By 2011 the number of people suffering kidney failure is expected to be 600,000 in the U.S. alone.

In addition to being a fraction of the size of current dialysis machines, the Home Dialysis Plus device will operate much more quietly and is designed to not look like a typical piece of medical equipment, but to blend into a home environment, Baker said.

During the 1960s, Dr. Richard Drake developed the Drake Willock dialysis machine, which rapidly became the best selling dialysis system in the world. Drake’s Portland-based company, DWS, Inc., employed 250 employees before it was sold in the 1970s. Drake, now retired, says the use of MMD technology in the Home Dialysis Plus filter is an important advance.

"That is a major breakthrough, because filters have always been a problem," he said. "Reducing the size and increasing the efficiency is very important."

Although other companies, like Hewlett-Packard, are partnering with OSU researchers to employ MMD technology in new devices, Altman Browning is the first company on the brink of commercializing a viable product.

"This is an exciting example of how the MMD technology we’re developing here at Oregon State University, in partnership with other Oregon universities and businesses, will dramatically improve lives," said Ron Adams, dean of engineering at OSU. "It also illustrates how this technology can lead to new companies and new jobs here in Oregon and beyond."

Researchers at OSU are partnering with researchers at the University of Oregon, Portland State University, Pacific Northwest National Laboratory and other institutions to develop MMD technology, which U.S. Senator Ron Wyden has predicted will be an "economic sparkplug" for the Pacific Northwest.

"MMD technology has the potential to spawn an entire industry, one that could rival the microelectronics boom of the 1950s and 60s," Adams said. "The Home Dialysis Plus product is just the tip of a very large iceberg."

MMD technology includes the use of microchannels, which enable high rates of heat and mass transfer and are the reason for the high rates of efficiency in the Home Dialysis Plus filter.

OSU researchers are also developing an MMD technology-based portable cooling system for the U.S. military that will be used by soldiers, firefighters, and emergency personnel working in hot or hazardous conditions.


More information on this and related advances can be found on the web: OSU College of Engineering, http://engr.oregonstate.edu and Altman Browning and Company, http://www.altmanbrowning.com

By Gregg Kleiner, 541-737-9684
SOURCES: Ron Adams, 541-737-3101
Michael Baker: 503-233-7789, Ext. 118

Ron Adams | EurekAlert!
Further information:
http://engr.oregonstate.edu
http://www.altmanbrowning.com

More articles from Health and Medicine:

nachricht Indications of Psychosis Appear in Cortical Folding
26.04.2018 | Universität Basel

nachricht GLUT5 fluorescent probe fingerprints cancer cells
20.04.2018 | Michigan Technological University

All articles from Health and Medicine >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Why we need erasable MRI scans

New technology could allow an MRI contrast agent to 'blink off,' helping doctors diagnose disease

Magnetic resonance imaging, or MRI, is a widely used medical tool for taking pictures of the insides of our body. One way to make MRI scans easier to read is...

Im Focus: BAM@Hannover Messe: innovative 3D printing method for space flight

At the Hannover Messe 2018, the Bundesanstalt für Materialforschung und-prüfung (BAM) will show how, in the future, astronauts could produce their own tools or spare parts in zero gravity using 3D printing. This will reduce, weight and transport costs for space missions. Visitors can experience the innovative additive manufacturing process live at the fair.

Powder-based additive manufacturing in zero gravity is the name of the project in which a component is produced by applying metallic powder layers and then...

Im Focus: Molecules Brilliantly Illuminated

Physicists at the Laboratory for Attosecond Physics, which is jointly run by Ludwig-Maximilians-Universität and the Max Planck Institute of Quantum Optics, have developed a high-power laser system that generates ultrashort pulses of light covering a large share of the mid-infrared spectrum. The researchers envisage a wide range of applications for the technology – in the early diagnosis of cancer, for instance.

Molecules are the building blocks of life. Like all other organisms, we are made of them. They control our biorhythm, and they can also reflect our state of...

Im Focus: Spider silk key to new bone-fixing composite

University of Connecticut researchers have created a biodegradable composite made of silk fibers that can be used to repair broken load-bearing bones without the complications sometimes presented by other materials.

Repairing major load-bearing bones such as those in the leg can be a long and uncomfortable process.

Im Focus: Writing and deleting magnets with lasers

Study published in the journal ACS Applied Materials & Interfaces is the outcome of an international effort that included teams from Dresden and Berlin in Germany, and the US.

Scientists at the Helmholtz-Zentrum Dresden-Rossendorf (HZDR) together with colleagues from the Helmholtz-Zentrum Berlin (HZB) and the University of Virginia...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

VideoLinks
Industry & Economy
Event News

Invitation to the upcoming "Current Topics in Bioinformatics: Big Data in Genomics and Medicine"

13.04.2018 | Event News

Unique scope of UV LED technologies and applications presented in Berlin: ICULTA-2018

12.04.2018 | Event News

IWOLIA: A conference bringing together German Industrie 4.0 and French Industrie du Futur

09.04.2018 | Event News

 
Latest News

World's smallest optical implantable biodevice

26.04.2018 | Power and Electrical Engineering

Molecular evolution: How the building blocks of life may form in space

26.04.2018 | Life Sciences

First Li-Fi-product with technology from Fraunhofer HHI launched in Japan

26.04.2018 | Power and Electrical Engineering

VideoLinks
Science & Research
Overview of more VideoLinks >>>