The Ebola fever and other diseases are highly dangerous and transferred by sick people or contaminated objects. In our global world airplanes are one way to export this virus all over the world.
Africa for instance has around 60 airports so it’s an important international challenge to prevent sick people flying. For this purpose you can use Optris’s fever inspection system.
Virus epidemics like the Swine influenza in 2009/2010 and the Ebola virus disease in 2014 created a worldwide demand for suitable screening techniques allowing a fast non contact detection of travellers with potential fever.
The installation of the whole system including the infrared camera and its extensive software package is very easy. Also it can be re-located and set up in minimum time. The system is password-protected to prevent unauthorised changes.
Because of a reference radiator built into the infrared camera there’s an automatic and constant IR calibration of the camera itself. The temperature resolution of 0.1°C detects the smallest of temperature variances.
The system works discreetly. The software singles out the people whose skin temperature exceeds the predefined value. The visual alarm gives airport employees the possibility to identify and isolate suspects from their co-travellers so that a medical examination can be done discreetly.
If necessary the software offers the possibility to take automatically IR image snapshots when a person trips the alarm.
The system is available ex stock and can be delivered within one week. Scope of supply: USB camera incl. 1 lens, USB cable (1 m), table tripod,software package optris PI Connect, aluminum case. Price from 2,690 Euro including software.
Dipl.-Ing. Buelent Franke
+49 30 500 197-42
Matthias Rauch | Optris GmbH
Artificial intelligence may help diagnose tuberculosis in remote areas
25.04.2017 | Radiological Society of North America
Pharmacoscpy: Next-Generation Microscopy
25.04.2017 | CeMM Forschungszentrum für Molekulare Medizin der Österreichischen Akademie der Wissenschaften
More and more automobile companies are focusing on body parts made of carbon fiber reinforced plastics (CFRP). However, manufacturing and repair costs must be further reduced in order to make CFRP more economical in use. Together with the Volkswagen AG and five other partners in the project HolQueSt 3D, the Laser Zentrum Hannover e.V. (LZH) has developed laser processes for the automatic trimming, drilling and repair of three-dimensional components.
Automated manufacturing processes are the basis for ultimately establishing the series production of CFRP components. In the project HolQueSt 3D, the LZH has...
Reflecting the structure of composites found in nature and the ancient world, researchers at the University of Illinois at Urbana-Champaign have synthesized thin carbon nanotube (CNT) textiles that exhibit both high electrical conductivity and a level of toughness that is about fifty times higher than copper films, currently used in electronics.
"The structural robustness of thin metal films has significant importance for the reliable operation of smart skin and flexible electronics including...
The nearby, giant radio galaxy M87 hosts a supermassive black hole (BH) and is well-known for its bright jet dominating the spectrum over ten orders of magnitude in frequency. Due to its proximity, jet prominence, and the large black hole mass, M87 is the best laboratory for investigating the formation, acceleration, and collimation of relativistic jets. A research team led by Silke Britzen from the Max Planck Institute for Radio Astronomy in Bonn, Germany, has found strong indication for turbulent processes connecting the accretion disk and the jet of that galaxy providing insights into the longstanding problem of the origin of astrophysical jets.
Supermassive black holes form some of the most enigmatic phenomena in astrophysics. Their enormous energy output is supposed to be generated by the...
The probability to find a certain number of photons inside a laser pulse usually corresponds to a classical distribution of independent events, the so-called...
Microprocessors based on atomically thin materials hold the promise of the evolution of traditional processors as well as new applications in the field of flexible electronics. Now, a TU Wien research team led by Thomas Müller has made a breakthrough in this field as part of an ongoing research project.
Two-dimensional materials, or 2D materials for short, are extremely versatile, although – or often more precisely because – they are made up of just one or a...
20.04.2017 | Event News
18.04.2017 | Event News
03.04.2017 | Event News
25.04.2017 | Physics and Astronomy
25.04.2017 | Materials Sciences
25.04.2017 | Life Sciences