Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Increased capacity and approved accuracy for belt scale system

27.03.2009
Milltronics MSI and MMI Belt scales from Siemens Industry Automation Division are now available for use on systems with flow rates of up to 12000 tons per hour, an increase of 7000 tons per hour.
The MSI and MMI, combined with a Milltronics BW500 Integrator and a speed sensor, now have OIML (International Organization of Legal Metrology) and MID ((Measuring Instruments Directive). These approvals guarantee the MSI and MMI belt scales meet strict requirements for weights and measures applications in accuracy and repeatability.

The Milltronics MSI, a heavy-duty single idler belt scale, is used for rugged applications in process and load-out control. MSI provides instant response to belt loading and overload protection to 300 per cent. The MSI measures only the vertical load applied through the belt and the supporting suspended idler, and is so structurally sound that it can be applied to the most demanding applications. Drop-in installation makes alignment easy and economical.

The Milltronics MMI is a heavy-duty, high accuracy multi-idler belt scale consisting of two or more MSI scales. Used for critical process and load-out control, the two idler MMI-2 offers accuracy up to +/- 0.25 %. For even greater accuracy, the Milltronics MMI-3, a three idler belt scale, can be used on applications requiring accuracy to +/- 0.125%.

The MSI and MMI models can be installed without the use of cranes or other high cost resources.

Gerhard Stauss | Siemens Industry Automation
Further information:
http://www.siemens.com/continuous-weighing

More articles from Machine Engineering:

nachricht Enhanced ball screw drive with increased lifetime through novel double nut design
23.01.2018 | Technologie Lizenz-Büro (TLB) der Baden-Württembergischen Hochschulen GmbH

nachricht Scientists from Hannover develop a novel lightweight production process
27.09.2017 | IPH - Institut für Integrierte Produktion Hannover gGmbH

All articles from Machine Engineering >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Optical Nanoscope Allows Imaging of Quantum Dots

Physicists have developed a technique based on optical microscopy that can be used to create images of atoms on the nanoscale. In particular, the new method allows the imaging of quantum dots in a semiconductor chip. Together with colleagues from the University of Bochum, scientists from the University of Basel’s Department of Physics and the Swiss Nanoscience Institute reported the findings in the journal Nature Photonics.

Microscopes allow us to see structures that are otherwise invisible to the human eye. However, conventional optical microscopes cannot be used to image...

Im Focus: Artificial agent designs quantum experiments

On the way to an intelligent laboratory, physicists from Innsbruck and Vienna present an artificial agent that autonomously designs quantum experiments. In initial experiments, the system has independently (re)discovered experimental techniques that are nowadays standard in modern quantum optical laboratories. This shows how machines could play a more creative role in research in the future.

We carry smartphones in our pockets, the streets are dotted with semi-autonomous cars, but in the research laboratory experiments are still being designed by...

Im Focus: Scientists decipher key principle behind reaction of metalloenzymes

So-called pre-distorted states accelerate photochemical reactions too

What enables electrons to be transferred swiftly, for example during photosynthesis? An interdisciplinary team of researchers has worked out the details of how...

Im Focus: The first precise measurement of a single molecule's effective charge

For the first time, scientists have precisely measured the effective electrical charge of a single molecule in solution. This fundamental insight of an SNSF Professor could also pave the way for future medical diagnostics.

Electrical charge is one of the key properties that allows molecules to interact. Life itself depends on this phenomenon: many biological processes involve...

Im Focus: Paradigm shift in Paris: Encouraging an holistic view of laser machining

At the JEC World Composite Show in Paris in March 2018, the Fraunhofer Institute for Laser Technology ILT will be focusing on the latest trends and innovations in laser machining of composites. Among other things, researchers at the booth shared with the Aachen Center for Integrative Lightweight Production (AZL) will demonstrate how lasers can be used for joining, structuring, cutting and drilling composite materials.

No other industry has attracted as much public attention to composite materials as the automotive industry, which along with the aerospace industry is a driver...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

10th International Symposium: “Advanced Battery Power – Kraftwerk Batterie” Münster, 10-11 April 2018

08.01.2018 | Event News

See, understand and experience the work of the future

11.12.2017 | Event News

Innovative strategies to tackle parasitic worms

08.12.2017 | Event News

 
Latest News

Rutgers scientists discover 'Legos of life'

23.01.2018 | Life Sciences

Seabed mining could destroy ecosystems

23.01.2018 | Earth Sciences

Transportable laser

23.01.2018 | Physics and Astronomy

VideoLinks Science & Research
Overview of more VideoLinks >>>