Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Wildfires can burn hot without ruining soil, new study finds

23.04.2013
When scientists torched an entire 22-acre watershed in Portugal in a recent experiment, their research yielded a counterintuitive result: Large, hot fires do not necessarily beget hot, scorched soil.

It’s well known that wildfires can leave surface soil burned and barren, which increases the risk of erosion and hinders a landscape’s ability to recover. But the scientists’ fiery test found that the hotter the fire—and the denser the vegetation feeding the flames—the less the underlying soil heated up, an inverse effect which runs contrary to previous studies and conventional wisdom.

Rather, the soil temperature was most affected by the fire’s speed, the direction of heat travel and the landscape’s initial moisture content. These new findings could help forest managers plan when and where to ignite small controlled burns to reduce dry vegetation and restore the ecosystem in at-risk areas, said Cathelijne Stoof, the soil and water scientist who led this study as part of her PhD research at Wageningen University in the Netherlands.

A report about the experimentby Stoof, who is now at Cornell University in Ithaca, New York, and her colleagueshas been accepted for publication by Geophysical Research Letters, a journal of the American Geophysical Union.

To study the real-world effects of landscape and fire dynamics on soil temperature, the research team mapped the watershed and installed instruments before setting the test area ablaze. During the burn the scientists monitored the fire and the resulting soil temperatures. As expected, the fire was most intense in the heavily vegetated areas, but the topsoil in these regions remained “surprisingly cool” during the duration of the fire, Stoof explained.

“Vegetation is fuel, so the areas with more vegetation had more intense fire,” Stoof said. “But the heavily vegetated regions also were also more moist, which protected the soil.”

The areas with the hottest soil temperatures were in direct sunlight and had sparse, dry vegetation. “Because it’s already dried out, it doesn’t have the moisture shield that more densely vegetated areas have to preserve the soil,” Stoof said.

Other, previously observed behavior of fires could also help explain the new result, Stoof added. “Fires moving fast will quickly burn up all the vegetation and also have little effect on the soil, but slow-moving fires will have much more time to heat up the soil and burn up its organic matter and seeds,” she noted.

Prior to this study, most of the research concerning fire effects on soil “took place in small scale field or laboratory settings, where they only burned small plots,” Stoof said. “But these plots have less variation than a real watershed. If you have homogeneous conditions, you cannot extrapolate those results to the larger scale, where fire, soil and vegetation are heterogeneous.”

Fire researcher Guillermo Rein of the Imperial College, London, called the results from Stoof and her colleagues “thought-provoking.” They “go against the currently prevalent theory of soil heating,” he said. “This paper ought to quickly mobilize the fire science community so that this soil heating theory can be reconfirmed, refuted or reformulated.”

From the new results, Stoof has devised a strategy to minimize soil damage during controlled burns. “You need to burn heterogeneous areas in two stages,” Stoof said. “Burn the driest area first when it has some moisture. The damp area will be too damp, and therefore will not carry fire. Then go back and burn the damp area when it’s dried out enough so that it will burn. This way you end up with minimum soil damage.”

But in order to apply the results of this study universally, soil and fire scientists need to work together and study other types of landscapes, Stoof added. “We just studied one type of environment and one fire. This experiment needs to be replicated so we can understand how different vegetation and soil types are affected. If soil scientists work with fire scientists, they can predict where the damage is going to occur and put up barriers to prevent erosion, or plan prescribed burns strategically to minimize soil depletion.”

A scholarship from the International Association of Wildland Fire and a European Commission contract funded this work.

Notes for Journalists
Journalists and public information officers (PIOs) of educational and scientific institutions who have registered with AGU can download a PDF copy of this accepted article by clicking on this link:
http://onlinelibrary.wiley.com/doi/10.1002/grl.50299/abstract

Or, you may order a copy of the final paper by emailing your request to Sarah Charley at scharley@agu.org. Please provide your name, the name of your publication, and your phone number.

Neither the paper nor this press release are under embargo.

Title:

“Hot Fire, Cool Soil”
Authors:
Cathelijne R. Stoof Department of Biological and Environmental Engineering, Cornell University, Ithaca, NY, USA, Land Degradation and Development Group, Wageningen University, Wageningen, The Netherlands, and Centro de Estudos de Recursos Naturais, Ambiente e Sociedade, Escola Superior Agrária de Coimbra. Bencanta, Coimbra, Portugal;Demie Moore Land Degradation and Development Group, Wageningen University, Wageningen, The Netherlands;Paulo M. Fernandes Centro de Investigação e de Tecnologias Agro-Ambientais e Biológicas, Universidade de Trás-os-Montes e Alto Douro. Vila Real, Portugal;Jetse J. Stoorvogel Land Dynamics Group, Wageningen University, Wageningen, The Netherlands;Ricardo E.S. Fernandes Gabinete Técnico Florestal, Câmara Municipal da Lousã, Rua Dr. João Santos, Lousã, Portugal;António J.D. Ferreira Centro de Estudos de Recursos Naturais, Ambiente e Sociedade, Escola Superior Agrária de Coimbra. Bencanta, Coimbra, Portugal;Coen J. Ritsema Land Degradation and Development Group, Wageningen University, Wageningen, The Netherlands, and Soil Physics and Land Use Team, Alterra Green World Research, Wageningen UR, Wageningen, The Netherlands.
Contact information for the author:
Cathelijne Stoof, Email: Cathelijne.Stoof@cornell.edu, Phone: +1 (607)255-4992
A video is now available to accompany the press release
http://www.youtube.com/watch?v=14xhUA45a_o&feature=youtu.be
in stories about these new findings.
AGU Contacts:
Sarah Charley
+1 (202) 777-7516
scharley@agu.org
Peter Weiss
+1 (202) 777-7507
pweiss@agu.org
Cornell University Press Relations Office Contact
John Carberry
+1 (607) 255-5353
jjc338@cornell.edu

Peter Weiss | American Geophysical Union
Further information:
http://www.agu.org

More articles from Earth Sciences:

nachricht How much biomass grows in the savannah?
16.02.2017 | Friedrich-Schiller-Universität Jena

nachricht Canadian glaciers now major contributor to sea level change, UCI study shows
15.02.2017 | University of California - Irvine

All articles from Earth Sciences >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Breakthrough with a chain of gold atoms

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

Im Focus: DNA repair: a new letter in the cell alphabet

Results reveal how discoveries may be hidden in scientific “blind spots”

Cells need to repair damaged DNA in our genes to prevent the development of cancer and other diseases. Our cells therefore activate and send “repair-proteins”...

Im Focus: Dresdner scientists print tomorrow’s world

The Fraunhofer IWS Dresden and Technische Universität Dresden inaugurated their jointly operated Center for Additive Manufacturing Dresden (AMCD) with a festive ceremony on February 7, 2017. Scientists from various disciplines perform research on materials, additive manufacturing processes and innovative technologies, which build up components in a layer by layer process. This technology opens up new horizons for component design and combinations of functions. For example during fabrication, electrical conductors and sensors are already able to be additively manufactured into components. They provide information about stress conditions of a product during operation.

The 3D-printing technology, or additive manufacturing as it is often called, has long made the step out of scientific research laboratories into industrial...

Im Focus: Mimicking nature's cellular architectures via 3-D printing

Research offers new level of control over the structure of 3-D printed materials

Nature does amazing things with limited design materials. Grass, for example, can support its own weight, resist strong wind loads, and recover after being...

Im Focus: Three Magnetic States for Each Hole

Nanometer-scale magnetic perforated grids could create new possibilities for computing. Together with international colleagues, scientists from the Helmholtz Zentrum Dresden-Rossendorf (HZDR) have shown how a cobalt grid can be reliably programmed at room temperature. In addition they discovered that for every hole ("antidot") three magnetic states can be configured. The results have been published in the journal "Scientific Reports".

Physicist Dr. Rantej Bali from the HZDR, together with scientists from Singapore and Australia, designed a special grid structure in a thin layer of cobalt in...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Booth and panel discussion – The Lindau Nobel Laureate Meetings at the AAAS 2017 Annual Meeting

13.02.2017 | Event News

Complex Loading versus Hidden Reserves

10.02.2017 | Event News

International Conference on Crystal Growth in Freiburg

09.02.2017 | Event News

 
Latest News

Biocompatible 3-D tracking system has potential to improve robot-assisted surgery

17.02.2017 | Medical Engineering

Real-time MRI analysis powered by supercomputers

17.02.2017 | Medical Engineering

Antibiotic effective against drug-resistant bacteria in pediatric skin infections

17.02.2017 | Health and Medicine

VideoLinks
B2B-VideoLinks
More VideoLinks >>>