"We knew there was ice below the surface at high latitudes of Mars, but we find that it extends far closer to the equator than you would think, based on Mars' climate today," said Shane Byrne of the University of Arizona, a member of the High Resolution Imaging Science Experiment, or HiRISE, which runs the high-resolution camera on NASA's Mars Reconnaissance Orbiter.
"The other surprising discovery is that ice exposed at the bottom of these meteorite impact craters is so pure," Byrne said. "The thinking before was that ice accumulates below the surface between soil grains, so there would be a 50-50 mix of dirt and ice. We were able to figure out, given how long it took that ice to fade from view, that the mixture is about one percent dirt and 99 percent ice."
Scientists used several instruments on the Mars Reconnaissance Orbiter, or MRO, in quick succession in detecting and confirming highly pure, bright ice exposed in new craters, ranging from 1.5 feet to 8 feet deep, at five different Martian sites.
In August 2008, the orbiter's Context camera team examined their images for any dark spots or other changes that weren't visible in earlier images of the same area. Meteorites usually leave dark marks when they crash into dust-covered Mars terrain.
The HiRISE team, which bases its operations at the UA Lunar and Planetary Laboratory, followed up in September 2008 by taking high-resolution images of the dark spots."We saw something very unusual when we followed up on the first of these impact craters," Byrne said, "and that was this bright blue material poking up from the bottom of the crater. It looked a lot like water ice.
And sure enough, when we started monitoring this material, it faded away like you'd expect water ice to fade, because water ice is unstable on Mars' surface and turns directly into water vapor in the atmosphere."
A few days later that September, the orbiter's "CRISM" team used their Compact Reconnaissance Imaging Spectrometer for Mars and got the spectral signature of water ice exposed in one of the impact craters, further clinching the discovery.
"All of this had to happen very quickly because 200 days after we first saw the ice, it was gone, it was the color of dirt," Byrne said. "If we had taken HiRISE images just a few months later, we wouldn't have noticed anything unusual. This discovery would have just passed us by."
Byrne and 17 co-authors are reporting the findings in the Sept. 25 edition of the journal Science.
How far water ice extends toward the equator depends largely on how much water has been available in the Martian atmosphere in the recent past, Byrne said: "The ice is a relic of a more humid climate not very long ago, perhaps just several thousand years ago."
The Phoenix Mars Lander mission last year also found clean ice at its landing site on the northern plains of Mars, Byrne noted.
But to find highly pure ice far closer to the equator because of random meteor impacts was unexpected, he said.
There are several theories about how a layer of such pure ice could have formed beneath Mars surface. Byrne said he thinks that one of the most promising ideas is that this ice on Mars formed in the same way that pure ice lenses form beneath the surface of the Earth.
"That's where you have very thin films of liquid water around ice grains and soil grains and they migrate around to form clear ice lenses on top of the ice table, even at temperatures well below zero. This process is called ‘frost heave' on Earth, and it's considered a nuisance in most places because it cracks up roads and tilts walls and destroys foundations of houses.
"But on Mars it would be of great interest if we could discover a process that involved liquid water in today's climate, and not just in some of the warmest areas of the planet but in some of the coldest areas of the planet in the high latitude regions," Byrne said.
In the past decade, researchers from UA's Lunar and Planetary Laboratory have played major roles in piecing together the picture of where water is to be found on Mars:
* Professor Alfred McEwen, a co-author on the Sept. 25 Science paper, is principal investigator for HiRISE, which began imaging Mars in November 2006. At this time, the HiRISE Web site features more than 577processed pictures of Martian water features among thousands of pictures of features on the surface of the planet.
* Professor William Boynton developed the Gamma Ray Spectrometer instrument package on Mars Odyssey that detected water ice near the Martian poles in 2001.
* Phoenix Mars Lander principal investigator Peter Smith headed the mission that used a long robotic arm to uncover and confirm the shallow ice table at its landing site, and other instruments to document snowfall and ground frost at its high polar latitude. The Phoenix Mars Mission began science operations on the northern plains of Mars after landing May 25, 2008, and lasted five months, until winter arrived.
The Mars Reconnaissance Orbiter is managed by the Jet Propulsion Laboratory, a division of the California Institute of Technology, for NASA's Science Mission Directorate in Washington.
The University of Arizona operates the High Resolution Imaging Science Experiment, which operates the HiRISE camera built by Ball Aerospace & Technologies Corp., Boulder, Colo.Lockheed Martin Space Systems, Denver, built the spacecraft. The Context Camera is operated by and was provided by Malin Space Science Systems.
The Johns Hopkins University Applied Physics Laboratory led the effort to build the Compact Reconnaissance Imaging Spectrometer for Mars and operates it in coordination with an international team of researchers.
Shane Byrne (520-626-0407; firstname.lastname@example.org) Alfred McEwen (520-621-4573; email@example.com)
Lori Stiles | University of Arizona
Citizen science campaign to aid disaster response
28.04.2017 | International Institute for Applied Systems Analysis (IIASA)
From volcano's slope, NASA instrument looks sky high and to the future
27.04.2017 | NASA/Goddard Space Flight Center
More and more automobile companies are focusing on body parts made of carbon fiber reinforced plastics (CFRP). However, manufacturing and repair costs must be further reduced in order to make CFRP more economical in use. Together with the Volkswagen AG and five other partners in the project HolQueSt 3D, the Laser Zentrum Hannover e.V. (LZH) has developed laser processes for the automatic trimming, drilling and repair of three-dimensional components.
Automated manufacturing processes are the basis for ultimately establishing the series production of CFRP components. In the project HolQueSt 3D, the LZH has...
Reflecting the structure of composites found in nature and the ancient world, researchers at the University of Illinois at Urbana-Champaign have synthesized thin carbon nanotube (CNT) textiles that exhibit both high electrical conductivity and a level of toughness that is about fifty times higher than copper films, currently used in electronics.
"The structural robustness of thin metal films has significant importance for the reliable operation of smart skin and flexible electronics including...
The nearby, giant radio galaxy M87 hosts a supermassive black hole (BH) and is well-known for its bright jet dominating the spectrum over ten orders of magnitude in frequency. Due to its proximity, jet prominence, and the large black hole mass, M87 is the best laboratory for investigating the formation, acceleration, and collimation of relativistic jets. A research team led by Silke Britzen from the Max Planck Institute for Radio Astronomy in Bonn, Germany, has found strong indication for turbulent processes connecting the accretion disk and the jet of that galaxy providing insights into the longstanding problem of the origin of astrophysical jets.
Supermassive black holes form some of the most enigmatic phenomena in astrophysics. Their enormous energy output is supposed to be generated by the...
The probability to find a certain number of photons inside a laser pulse usually corresponds to a classical distribution of independent events, the so-called...
Microprocessors based on atomically thin materials hold the promise of the evolution of traditional processors as well as new applications in the field of flexible electronics. Now, a TU Wien research team led by Thomas Müller has made a breakthrough in this field as part of an ongoing research project.
Two-dimensional materials, or 2D materials for short, are extremely versatile, although – or often more precisely because – they are made up of just one or a...
28.04.2017 | Event News
20.04.2017 | Event News
18.04.2017 | Event News
28.04.2017 | Life Sciences
28.04.2017 | Life Sciences
28.04.2017 | Life Sciences