Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Saltwater solution to save crops

15.09.2008
Plant-powered desalination utilizes saline groundwater

Technology under development at the University of New South Wales could offer new hope to farmers in drought-affected and marginal areas by enabling crops to grow using salty groundwater.

Associate Professor Greg Leslie, a chemical engineer at UNSW's UNESCO Centre for Membrane Science and Technology, is working with the University of Sydney on technology which uses reverse-osmosis membranes to turn previously useless, brackish groundwater into a valuable agricultural resource.

"We are looking at ways to grow plants on very salty water without damaging soil," Professor Leslie said.

"We're incorporating a reverse osmosis membrane into a sub-surface drip irrigation system."

The irrigation system relies on the roots of the plant drawing salty groundwater through the membrane – in doing so removing the salt which would otherwise degrade the soil and make continued cropping unsustainable.

Desalination such as this requires a pressure gradient to draw clean water through the membrane. Professor Leslie has demonstrated that, by running irrigation lines under the ground beneath the plants, the root systems of the plants provide enough of a pressure gradient to draw up water without the high energy consumption usually required for desalination.

"We're going to provide agriculture with a tool to grow crops in drought years when there is limited access to run-off and surface water," he said.

The membrane technology, developed by Professor Leslie and the University of Sydney's Professor Bruce Sutton, has been patented by UNSW's commercial arm, NewSouth Innovations.

Peter Trute | EurekAlert!
Further information:
http://www.unsw.edu.au

More articles from Agricultural and Forestry Science:

nachricht Microjet generator for highly viscous fluids
13.02.2018 | Tokyo University of Agriculture and Technology

nachricht Sweet route to greater yields
08.02.2018 | Rothamsted Research

All articles from Agricultural and Forestry Science >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Demonstration of a single molecule piezoelectric effect

Breakthrough provides a new concept of the design of molecular motors, sensors and electricity generators at nanoscale

Researchers from the Institute of Organic Chemistry and Biochemistry of the CAS (IOCB Prague), Institute of Physics of the CAS (IP CAS) and Palacký University...

Im Focus: Hybrid optics bring color imaging using ultrathin metalenses into focus

For photographers and scientists, lenses are lifesavers. They reflect and refract light, making possible the imaging systems that drive discovery through the microscope and preserve history through cameras.

But today's glass-based lenses are bulky and resist miniaturization. Next-generation technologies, such as ultrathin cameras or tiny microscopes, require...

Im Focus: Stem cell divisions in the adult brain seen for the first time

Scientists from the University of Zurich have succeeded for the first time in tracking individual stem cells and their neuronal progeny over months within the intact adult brain. This study sheds light on how new neurons are produced throughout life.

The generation of new nerve cells was once thought to taper off at the end of embryonic development. However, recent research has shown that the adult brain...

Im Focus: Interference as a new method for cooling quantum devices

Theoretical physicists propose to use negative interference to control heat flow in quantum devices. Study published in Physical Review Letters

Quantum computer parts are sensitive and need to be cooled to very low temperatures. Their tiny size makes them particularly susceptible to a temperature...

Im Focus: Autonomous 3D scanner supports individual manufacturing processes

Let’s say the armrest is broken in your vintage car. As things stand, you would need a lot of luck and persistence to find the right spare part. But in the world of Industrie 4.0 and production with batch sizes of one, you can simply scan the armrest and print it out. This is made possible by the first ever 3D scanner capable of working autonomously and in real time. The autonomous scanning system will be on display at the Hannover Messe Preview on February 6 and at the Hannover Messe proper from April 23 to 27, 2018 (Hall 6, Booth A30).

Part of the charm of vintage cars is that they stopped making them long ago, so it is special when you do see one out on the roads. If something breaks or...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

VideoLinks
Industry & Economy
Event News

2nd International Conference on High Temperature Shape Memory Alloys (HTSMAs)

15.02.2018 | Event News

Aachen DC Grid Summit 2018

13.02.2018 | Event News

How Global Climate Policy Can Learn from the Energy Transition

12.02.2018 | Event News

 
Latest News

Fingerprints of quantum entanglement

16.02.2018 | Information Technology

'Living bandages': NUST MISIS scientists develop biocompatible anti-burn nanofibers

16.02.2018 | Health and Medicine

Hubble sees Neptune's mysterious shrinking storm

16.02.2018 | Physics and Astronomy

VideoLinks
Science & Research
Overview of more VideoLinks >>>