Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

The relationship between lawns and allergies and asthma

04.08.2005


"Have you ever driven down the road and seen someone mowing the lawn wearing a mask? This is an example of the relationship between allergies and mold spores in lawns. Dr. Phil Colbaugh, research plant pathologist at the Texas Agricultural Experiment Station in Dallas, cites a common image seen in Texas throughout the warm weather months.



Colbaugh is studying the relationship between landscaping choices and practices, seasonal weather and potential exposure to allergenic mold spores. While his research will eventually include flowering plants, woody ornamentals, trees and herbs, Colbaugh is currently focusing on turfgrasses. His research results are being prepared for peer review, but have not yet been published.

The research began with a goal of determining whether different turfgrasses support different levels of allergenic mold spores. Emily Williams, research associate in plant pathology, said the initial study involved clippings from residential lawns in Richardson and Plano.


High school students participating in Colbaugh’s annual Summer Environmental Research Internship program spent eight weeks collecting turfgrass clippings from St. Augustine and Bermudagrass lawns in these two North Texas communities. Then they counted allergenic mold spores washed from the plant materials.

Sunny Bermudagrass locations had the highest total mold spore counts, Williams said, and both sunny and shady Bermudagrass samples contained more spores than did the St. Augustine samples.

The results also showed a large difference in lawns with full sun versus lawns with full shade. Both the sunny Bermudagrass lawns and the sunny St. Augustine lawns had three times more allergenic mold spores than shady lawns.

"Texas is a really bad area for asthma and allergy sufferers," Colbaugh said. "The potential for exposure to allergens is high, and the exposure to mold spores is just one component in a complicated picture."

The Asthma and Allergy Foundation of America annually ranks allergy capitals. In 2004, Dallas / Fort Worth, Austin, Tulsa and Oklahoma City all ranked within the Top 10 of 100 American allergy capitals.

Allergy is a genetic susceptibility to the IgE anti-body, which is present within the body of an allergy sufferer. When IgE comes into contact with inhaled allergens such as pollen and fungal spores, histamine and other compounds that produce an allergic reaction are released.

According to the National Institute of Allergy and Infectious Diseases, more than 50 million Americans, or one in six, have allergies. That makes allergies the sixth-leading cause of chronic disease in the United States, costing $18 billion dollars annually.

Asthma, a constriction of the muscles lining the lungs is often triggered by rapid allergic reactions and can become life threatening if not treated quickly and properly. Fungal spores, in particular, pose a threat for people with asthma.

According to AsthmaNow.com, 9 million children and 14 million adults have been diagnosed with asthma. The condition also leads to more than 10 million missed school days each year and causes more than 14.5 million missed work days, valued at $2 billion to $3 billion annually.

Sensitization, a heightened reaction to allergens, can be caused by repeated exposure to fungal spores during routine activities, such as mowing the lawn or playing on the grass. Therefore the type of turfgrass may be a key factor in the allergic asthmatic reaction.

The most aggravating types of mold spores for asthma sufferers come from the fungal genus Alternaria, a member of the family Dematiaceae, which are recognized by their dark coloration, Williams said. Fungi reproduce by means of spores, microscopic structures that contain the main allergenic irritant. Dematiaceae and other types of fungal spores dwell on dead vegetation, such as decomposing turfgrass clippings, and in the soil.

Fungi play a vital role in the environment as decomposers. Dr. Harriet Burge of Environmental Microbiology Laboratories Inc., said a fungal-free environment is not possible or desirable. Fungi constitute an integral part of the environment, whether urban or rural.

"What was important to us was that we saw big differences in lawn types and spore counts," Colbaugh said. "Bermudagrass lawns were found to support twice as many spores as St. Augustine grass. It means the type of grass you choose to put down for your lawn or your athletic field may make a difference to those who suffer from allergies and asthma. St. Augustine supports fewer of the fungal spores that trigger allergic or asthmatic reactions."

Should grass clippings be left on a lawn or removed after mowing? Colbaugh and Williams advise leaving them.

"They are a great source of nutrients, including nitrogen, potassium and phosphorus, reducing the need for additional chemical fertilization," Williams said. "They contribute organic matter to the soil over time. Bagging these materials for curbside garbage collection is costly, and it takes up limited landfill space. And there are ways to reduce the potential for spore numbers on established lawns."

In recent related research, Colbaugh and Williams have shown that when a lawnmower with a mulching blade was used, spore numbers were much lower than when a standard blade was used.

Colbaugh and Williams emphasize they are not providing medical advice. Their goal is to provide science-based research in an area that lacks information. Ultimately, they hope this research will help everyone make informed choices about lawns and sports turfs.

This summer the researchers are measuring the differences among a number of turfgrass types under test plot conditions. They are tracking maintenance items such as fertility, mowing height, mowing frequency and irrigation, all of which affect the number of fungal spores within the turfgrass. They are also monitoring daily weather patterns to understand the influences of rain, dry weather, high winds, or high and low humidity.

"Preliminary results are confirming what we learned last year about Bermudagrass," Williams said. "Bermuda supports much higher numbers of allergenic mold spores than do the other types of grasses tested."

Those include St. Augustine, Zoysia and Reveille Hybrid Bluegrass, which was developed here at the Dallas center by Dr. James Read."

The next step in their research is to conduct air sampling during and immediately after mowing events, to determine exposure risk to the mower, Williams said. They would also like to determine whether the number of spores within the turfgrass clippings affects the number of spores in the air within the home landscape. No date has been set for that research effort, due to the high cost of the sampling equipment needed to conduct the test.

Until they can perform these aerobiological tests, Colbaugh and Williams plan to study other landscape materials, such as compost piles and mulching materials.

This summer, interns have explored the abilities of inorganic and organic mulching materials to support the growth of Alternaria.

"Preliminary experiments have shown some organic mulching materials do support fungal growth while others do not," Williams said. "These are preliminary experiments and we look forward to furthering this research in an effort to provide even more information for clinicians and homeowners."

Janet Gregg | EurekAlert!
Further information:
http://www.tamu.edu

More articles from Agricultural and Forestry Science:

nachricht Ammonium nitrogen input increases the synthesis of anticarcinogenic compounds in broccoli
26.04.2017 | University of the Basque Country

nachricht New data unearths pesticide peril in beehives
21.04.2017 | Cornell University

All articles from Agricultural and Forestry Science >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Making lightweight construction suitable for series production

More and more automobile companies are focusing on body parts made of carbon fiber reinforced plastics (CFRP). However, manufacturing and repair costs must be further reduced in order to make CFRP more economical in use. Together with the Volkswagen AG and five other partners in the project HolQueSt 3D, the Laser Zentrum Hannover e.V. (LZH) has developed laser processes for the automatic trimming, drilling and repair of three-dimensional components.

Automated manufacturing processes are the basis for ultimately establishing the series production of CFRP components. In the project HolQueSt 3D, the LZH has...

Im Focus: Wonder material? Novel nanotube structure strengthens thin films for flexible electronics

Reflecting the structure of composites found in nature and the ancient world, researchers at the University of Illinois at Urbana-Champaign have synthesized thin carbon nanotube (CNT) textiles that exhibit both high electrical conductivity and a level of toughness that is about fifty times higher than copper films, currently used in electronics.

"The structural robustness of thin metal films has significant importance for the reliable operation of smart skin and flexible electronics including...

Im Focus: Deep inside Galaxy M87

The nearby, giant radio galaxy M87 hosts a supermassive black hole (BH) and is well-known for its bright jet dominating the spectrum over ten orders of magnitude in frequency. Due to its proximity, jet prominence, and the large black hole mass, M87 is the best laboratory for investigating the formation, acceleration, and collimation of relativistic jets. A research team led by Silke Britzen from the Max Planck Institute for Radio Astronomy in Bonn, Germany, has found strong indication for turbulent processes connecting the accretion disk and the jet of that galaxy providing insights into the longstanding problem of the origin of astrophysical jets.

Supermassive black holes form some of the most enigmatic phenomena in astrophysics. Their enormous energy output is supposed to be generated by the...

Im Focus: A Quantum Low Pass for Photons

Physicists in Garching observe novel quantum effect that limits the number of emitted photons.

The probability to find a certain number of photons inside a laser pulse usually corresponds to a classical distribution of independent events, the so-called...

Im Focus: Microprocessors based on a layer of just three atoms

Microprocessors based on atomically thin materials hold the promise of the evolution of traditional processors as well as new applications in the field of flexible electronics. Now, a TU Wien research team led by Thomas Müller has made a breakthrough in this field as part of an ongoing research project.

Two-dimensional materials, or 2D materials for short, are extremely versatile, although – or often more precisely because – they are made up of just one or a...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Fighting drug resistant tuberculosis – InfectoGnostics meets MYCO-NET² partners in Peru

28.04.2017 | Event News

Expert meeting “Health Business Connect” will connect international medical technology companies

20.04.2017 | Event News

Wenn der Computer das Gehirn austrickst

18.04.2017 | Event News

 
Latest News

Wireless power can drive tiny electronic devices in the GI tract

28.04.2017 | Medical Engineering

Ice cave in Transylvania yields window into region's past

28.04.2017 | Earth Sciences

Nose2Brain – Better Therapy for Multiple Sclerosis

28.04.2017 | Life Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>