Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:


High-Voltage Vacuum Power Switch for Smart Power Grids

World’s First Successful Power Switch Using a Diamond Semiconductor. In the future, this technology may contribute to a new energy strategy in Japan through offshore wind energy, efficient power transmission across the Japanese archipelago, and more.
As part of problem solving-oriented basic research sponsored by the Japan Science and Technology Agency (JST), a group headed by Dr. Daisuke Takeuchi, a Senior Research Scientist of the National Institute of Advanced Industrial Science and Technology (AIST) and Dr. Satoshi Koizumi, a Principal Researcher of the National Institute for Materials Science (NIMS), succeeded for the first time in the world in fabricating a vacuum-based high withstand-voltage power switch and demonstrating its operation. This result was achieved by utilizing the features of a diamond semiconductor.

In order to introduce renewable energy in power grids and realize the “smart grid” concept, compact power conversion devices (devices that combine multiple power switches) that make it possible to convert and control voltage, current, and frequency are necessary. However, for the power switches developed to date using silicon and similar materials, an extremely large-scale power conversion device had been necessary to withstand high voltages, and this had a been a problem for practical application. Because the withstand voltage (dielectric voltage) of a vacuum is superior to that of semiconductors, which are solids, the development of an innovative vacuum-based power switch that offers an ultra-high withstand voltage, high efficiency, and compact size has been expected.

In order to use a vacuum in a switch, an electron emission device that passes a current through a vacuum when the switch is “on” is necessary. This research group clarified the fact that electrons can be freely emissioned into vacuum when a diamond surface is covered with hydrogen atoms. Therefore, the group developed a vacuum power switch in which a diamond semiconductor is used as the electron emission source. In verification of switch operation, the group confirmed that the device functions as a power switch at a voltage of 10kV. Based on these experimental results, if a vacuum power switch that can withstand voltages as large as 100kV can be fabricated, high power conversion devices with a size 1/10 that of conventional devices are theoretically possible.

In the future, the use of this technology is expected to contribute to realizing a new energy strategy in Japan through introduction of offshore wind energy in the seas surrounding Japan, efficient power transmission across the Japanese archipelago, and similar efforts.

These research results were introduced online as one of the highlights of the 2012 International Electron Devices Meeting (IEDM 2012), and was announced at IEDM 2012 on December 10, 2012 (US Eastern Time).

For more details:

AIST Public Relations Department
TEL: +81-29-862-6216
FAX: +81-29-862-6212

NIMS Public Relations Office
TEL: +81-29-859-2026
FAX: +81-29-859-2017

Inquiry of JST projects

Miyabi Hayama
Akitsugu Koga
Advanced Low Carbon Technology Research and Development Program
Japan Science and Technology Agency (JST)
TEL: +81-3-3512-3543
FAX: +81-3-3512-3533
(Please change "=" to "@")

Mikiko Tanifuji | Research asia research news
Further information:

More articles from Materials Sciences:

nachricht Study explains strength gap between graphene, carbon fiber
20.10.2016 | Rice University

nachricht Scientists develop a semiconductor nanocomposite material that moves in response to light
18.10.2016 | Worcester Polytechnic Institute

All articles from Materials Sciences >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: New 3-D wiring technique brings scalable quantum computers closer to reality

Researchers from the Institute for Quantum Computing (IQC) at the University of Waterloo led the development of a new extensible wiring technique capable of controlling superconducting quantum bits, representing a significant step towards to the realization of a scalable quantum computer.

"The quantum socket is a wiring method that uses three-dimensional wires based on spring-loaded pins to address individual qubits," said Jeremy Béjanin, a PhD...

Im Focus: Scientists develop a semiconductor nanocomposite material that moves in response to light

In a paper in Scientific Reports, a research team at Worcester Polytechnic Institute describes a novel light-activated phenomenon that could become the basis for applications as diverse as microscopic robotic grippers and more efficient solar cells.

A research team at Worcester Polytechnic Institute (WPI) has developed a revolutionary, light-activated semiconductor nanocomposite material that can be used...

Im Focus: Diamonds aren't forever: Sandia, Harvard team create first quantum computer bridge

By forcefully embedding two silicon atoms in a diamond matrix, Sandia researchers have demonstrated for the first time on a single chip all the components needed to create a quantum bridge to link quantum computers together.

"People have already built small quantum computers," says Sandia researcher Ryan Camacho. "Maybe the first useful one won't be a single giant quantum computer...

Im Focus: New Products - Highlights of COMPAMED 2016

COMPAMED has become the leading international marketplace for suppliers of medical manufacturing. The trade fair, which takes place every November and is co-located to MEDICA in Dusseldorf, has been steadily growing over the past years and shows that medical technology remains a rapidly growing market.

In 2016, the joint pavilion by the IVAM Microtechnology Network, the Product Market “High-tech for Medical Devices”, will be located in Hall 8a again and will...

Im Focus: Ultra-thin ferroelectric material for next-generation electronics

'Ferroelectric' materials can switch between different states of electrical polarization in response to an external electric field. This flexibility means they show promise for many applications, for example in electronic devices and computer memory. Current ferroelectric materials are highly valued for their thermal and chemical stability and rapid electro-mechanical responses, but creating a material that is scalable down to the tiny sizes needed for technologies like silicon-based semiconductors (Si-based CMOS) has proven challenging.

Now, Hiroshi Funakubo and co-workers at the Tokyo Institute of Technology, in collaboration with researchers across Japan, have conducted experiments to...

All Focus news of the innovation-report >>>



Event News

#IC2S2: When Social Science meets Computer Science - GESIS will host the IC2S2 conference 2017

14.10.2016 | Event News

Agricultural Trade Developments and Potentials in Central Asia and the South Caucasus

14.10.2016 | Event News

World Health Summit – Day Three: A Call to Action

12.10.2016 | Event News

Latest News

Innovative technique for shaping light could solve bandwidth crunch

20.10.2016 | Physics and Astronomy

Finding the lightest superdeformed triaxial atomic nucleus

20.10.2016 | Physics and Astronomy

NASA's MAVEN mission observes ups and downs of water escape from Mars

20.10.2016 | Physics and Astronomy

More VideoLinks >>>