Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Wandering heat: Anomalous heat distribution in one-dimensional systems

12.02.2014
According to Fourier’s law, heat spreads evenly throughout a system. For two- and one-dimensional objects such as films or the finest of wires, however, other rules seem to apply. NIM scientists have now pinned these down.

Just as ember spreads through a piece of coal, heat principally diffuses at a constant rate. The corresponding physical law known as Fourier’s law was already established 200 years ago.


Uniform spreading of heat ceases in low dimensions

Later, scientists came to the conclusion that other rules must apply to the distribution of heat in two- or one-dimensional objects such as films or very fine wires. Respective evidence was provided, for example, by experiments with carbon nanotubes or organic molecular chains, where thermal conductivity was not only dependent on the object’s material but also on its size, or rather its length.

This means that in some materials thermal conductivity increases with the object’s length, while in others it decreases. However, no one has so far been able to derive a physical law similar to Fourier’s law from these observations.

Together with international colleagues, NIM physicist Prof. Peter Hänggi (University of Augsburg) and his team have now gone one step further in the quest for such a law. The scientists have for the first time established a universally valid mathematical connection between object-size-dependent thermal conductivity and the corresponding anomalous rate of heat diffusion.

The insights thus gained allow scientists to devise hybrid materials which display entirely new thermal properties in one- or two-dimensional form. They exploit the fact that in these cases the rate of heat diffusion can be very high in some material compositions and extremely low in others. This is to say that one material allows heat to travel through it very quickly, while another functions as thermal insulator. The theoretical calculations are of particular interest for objects at nanoscale, whose thermal behavior is hard to measure in experiments. Currently, nanostructures composed of carbon materials which are to serve as phononic diodes or heat storage systems (memory) are simulated by computer models. Analogous to electronic components, these elements can then be used to conduct information processing.

“The exploration of heat diffusion in low-scale dimensions is only just beginning and certainly holds many surprises – as well as a huge potential”, explains Peter Hänggi. “The ubiquitous detrimental thermal losses, for example, can be used to beneficial effect for functional materials or phononic information processing. Maybe, in the distant future, the dream of a computer functioning with waste heat will come true.”

Publication:

Anomalous Heat Diffusion by Sha Liu, Peter Hänggi, Nianbei Li, Jie Ren, and Baowen Li. Phys. Rev. Lett. 112: 040601 (2014)

http://prl.aps.org/abstract/PRL/v112/i4/e040601

Contact person:

Prof. Peter Hänggi
Chair of Theoretical Physics I
Institute of Physics
University of Augsburg
86135 Augsburg, Germany
Tel: +49 821 598-3250
Hanggi@physik.uni-augsburg.de

Klaus P. Prem | idw
Further information:
http://www.nano-initiative-munich.de
http://www.uni-augsburg.de

More articles from Physics and Astronomy:

nachricht Artificial Intelligence Helps in the Discovery of New Materials
21.09.2016 | Universität Basel

nachricht Magnetic polaron imaged for the first time
19.09.2016 | Aalto University

All articles from Physics and Astronomy >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: OLED microdisplays in data glasses for improved human-machine interaction

The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.

“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...

Im Focus: Artificial Intelligence Helps in the Discovery of New Materials

With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.

Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...

Im Focus: Complex hardmetal tools out of the 3D printer

For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.

Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...

Im Focus: Launch of New Industry Working Group for Process Control in Laser Material Processing

At AKL’16, the International Laser Technology Congress held in May this year, interest in the topic of process control was greater than expected. Appropriately, the event was also used to launch the Industry Working Group for Process Control in Laser Material Processing. The group provides a forum for representatives from industry and research to initiate pre-competitive projects and discuss issues such as standards, potential cost savings and feasibility.

In the age of industry 4.0, laser technology is firmly established within manufacturing. A wide variety of laser techniques – from USP ablation and additive...

Im Focus: New laser joining technologies at ‘K 2016’ trade fair

Every three years, the plastics industry gathers at K, the international trade fair for plastics and rubber in Düsseldorf. The Fraunhofer Institute for Laser Technology ILT will also be attending again and presenting many innovative technologies, such as for joining plastics and metals using ultrashort pulse lasers. From October 19 to 26, you can find the Fraunhofer ILT at the joint Fraunhofer booth SC01 in Hall 7.

K is the world’s largest trade fair for the plastics and rubber industry. As in previous years, the organizers are expecting 3,000 exhibitors and more than...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Experts from industry and academia discuss the future mobile telecommunications standard 5G

23.09.2016 | Event News

ICPE in Graz for the seventh time

20.09.2016 | Event News

Using mathematical models to understand our brain

16.09.2016 | Event News

 
Latest News

Chains of nanogold – forged with atomic precision

23.09.2016 | Life Sciences

New leukemia treatment offers hope

23.09.2016 | Health and Medicine

Self-assembled nanostructures hit their target

23.09.2016 | Life Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>