Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Lehigh group reports best threshold values for near-infrared range InGaAsN lasers

16.12.2003


The ink was hardly dry on his new contract as assistant professor of electrical and computer engineering at Lehigh, when Nelson Tansu announced a breakthrough in his research into high-performance lasers.




In two recent issues of Applied Physics Letters (APL) - on July 7 and Sept. 29, Tansu and other collaborating researchers reported the best threshold values to date for near-infrared-range (with an emission wavelength of 1300-nm), indium-gallium-arsenide-nitride (InGaAsN) lasers emitting from a quantum well.

Tansu’s group also achieved the best threshold values yet for near-infrared-range quantum-well (QW) lasers operating under continuous-wave conditions at temperatures up to 100 degrees C.


The work of Tansu’s group was featured in the September issue of LaserFocusWorld, a photonics and optoelectronics industry journal.

One month later, on Oct. 10, Tansu was featured in the cover article of GATRA, the second-most widely circulated weekly news magazine in Indonesia (population 250 million), where Tansu was born and raised. The article described five Indonesians who are employed as university professors outside Indonesia.

The first APL article, titled "High-performance and high-temperature continuous-wave-operation 1300-nm InGaAsN quantum well lasers by organometallic vapor phase epitaxy," is one of eleven journal and conference papers Tansu has published since joining the Lehigh faculty.

The other articles have appeared in several APLs, IEEE’s Journal of Quantum Electronics, IEEE’s Journal of Selected Topics in Quantum Electronics, the Proceedings of the 16th IEEE Laser and Electro Optics Society Annual Meeting (2003), and other journals and conference proceedings. Tansu has also been invited to write a review paper on the physics and devices of dilute nitride lasers for an issue of the IOP’s Journal of Physics: Condensed Matter Physics in 2004.

The general goal of Tansu’s work is to use metal organic chemical vapor deposition (MOCVD) to develop lasers and advanced compound semiconductor nanostructures for optoelectronic devices. His research interests are also related to combining these semiconductor nanostructures with photonic crystals (artificial structures with periodicity of certain optical properties), to realize novel optoelectronic devices. His work has applications in optical communications, mid-infrared devices, free-space communications, visible light sources, information sciences, and biochemical detection.

Tansu says the criteria for high-performance lasers include low operating current, high efficiency, the ability to operate at high speeds at a range of temperatures (from room temperature to 100 degrees C.), and the ability to operate at high temperatures without the need for costly additional electronics to maintain thermal stability.

One type of laser with which Tansu works is high-performance VCSELs, or vertical cavity surface-emitting lasers, which are cheap to produce and operate at a low current. VCSELs are used in short-haul communications systems, which operate with an 850-nm wavelength, allow a transmission range of about 200-500 meters and are typically used in university campuses, offices, residential complexes, and similar venues.

The accomplishments by Tansu’s group have the potential to lead to the realization of low-cost and high-performance 1300-nm VCSELs, capable of a transmission rate of 10 gigabytes per second. Tansu’s group is one of the first to realize high-performance near-infrared range InGaAsN quantum wells by using MOCVD technology, which is the technology of choice to realize VCSELs in manufacturing. Near-infrared range lasers, which operate with a 1300-nm wavelength, allow a transmission range of 20 to 100 kilometers and are also called metropolitan optical networks because they can connect cities that are in close proximity.

The group achieved its breakthrough using InGaAsN, a new lasing material also known as dilute-nitride, on a gallium-arsenide substrate, instead of the conventional approach based on indium-phosphide technology.

"Using dilute-nitride grown on a gallium-arsenide base," says Tansu, "it is much easier to make the high-performance reflectors that are critical to achieving high-performance VCSELs. We accomplished this by using MOCVD, which is also known as MOVPE [Metal-Organic Vapor Phase Epitaxy]."

Tansu’s works represent the first realization of MOCVD-grown high-performance 1300-nm dilute-nitride lasers under continuous-wave (CW) operations rather than pulsed conditions, and with a better performance than that achieved with molecular beam epitaxy. (A German research group previously demonstrated that type of high-performance laser with molecular beam epitaxy.) CW is a virtual prerequisite for lasers to be used in real-world applications; pulsed conditions are typically used in the early stages of experimentation.

The lasers in Tansu’s system emit from a 6-nm-thick quantum well that is grown on a dilute-nitride semiconductor nanostructure layer using a strained-compensated technique.

Tansu earned his bachelor’s and Ph.D. degrees in 1998 and 2003, respectively, from the University of Wisconsin-Madison, where he also won the 2003 Harold A. Peterson Best Research Paper Award.


Kurt Pfitzer | Lehigh University
Further information:
http://www3.lehigh.edu/engineering/news/tansuvaluesforinfraredrange.asp

More articles from Physics and Astronomy:

nachricht Streamlining accelerated computing for industry
24.08.2016 | DOE/Oak Ridge National Laboratory

nachricht Lehigh engineer discovers a high-speed nano-avalanche
24.08.2016 | Lehigh University

All articles from Physics and Astronomy >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Streamlining accelerated computing for industry

PyFR code combines high accuracy with flexibility to resolve unsteady turbulence problems

Scientists and engineers striving to create the next machine-age marvel--whether it be a more aerodynamic rocket, a faster race car, or a higher-efficiency jet...

Im Focus: X-ray optics on a chip

Waveguides are widely used for filtering, confining, guiding, coupling or splitting beams of visible light. However, creating waveguides that could do the same for X-rays has posed tremendous challenges in fabrication, so they are still only in an early stage of development.

In the latest issue of Acta Crystallographica Section A: Foundations and Advances , Sarah Hoffmann-Urlaub and Tim Salditt report the fabrication and testing of...

Im Focus: Piggyback battery for microchips: TU Graz researchers develop new battery concept

Electrochemists at TU Graz have managed to use monocrystalline semiconductor silicon as an active storage electrode in lithium batteries. This enables an integrated power supply to be made for microchips with a rechargeable battery.

Small electrical gadgets, such as mobile phones, tablets or notebooks, are indispensable accompaniments of everyday life. Integrated circuits in the interiors...

Im Focus: UCI physicists confirm possible discovery of fifth force of nature

Light particle could be key to understanding dark matter in universe

Recent findings indicating the possible discovery of a previously unknown subatomic particle may be evidence of a fifth fundamental force of nature, according...

Im Focus: Wi-fi from lasers

White light from lasers demonstrates data speeds of up to 2 GB/s

A nanocrystalline material that rapidly makes white light out of blue light has been developed by KAUST researchers.

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

The energy transition is not possible without Geotechnics

25.08.2016 | Event News

New Ideas for the Shipping Industry

24.08.2016 | Event News

A week of excellence: 22 of the world’s best computer scientists and mathematicians in Heidelberg

12.08.2016 | Event News

 
Latest News

3-D-printed structures 'remember' their shapes

29.08.2016 | Materials Sciences

From rigid to flexible

29.08.2016 | Life Sciences

Sensor systems identify senior citizens at risk of falling within 3 weeks

29.08.2016 | Medical Engineering

VideoLinks
B2B-VideoLinks
More VideoLinks >>>