Mathematicians at the University of California, Merced created a model of penguin huddles that assumes each penguin aims solely to minimize its own heat loss. Surprisingly, the model reveals that such self-centered behavior results in an equitable sharing of heat. The results are published in the online journal PLOS ONE and the researchers will discuss their findings at the annual meeting of the American Physical Society's (APS) Division of Fluid Dynamics (DFD), held Nov. 18 – 20 in San Diego, Calif.
Penguins aren't a typical study subject for Francois Blanchette, an applied mathematician at UC Merced who focuses on fluid dynamics. However, after seeing penguin huddles in the movie "The March of the Penguins" Blanchette realized that the important factors that shaped the huddle, including wind and heat flow, fell within his area of expertise.
Blanchette and his fellow researchers, Arnold Kim and Aaron Waters, modeled huddles packed so tightly that only the penguins on the outside could move. Each penguin in the huddle generated heat that the wind blew away. By considering such factors as the number of penguins in the huddle and the strength and turbulence of the wind, the model calculated which penguin on the outside of the huddle was coldest. The coldest penguin moved to the most sheltered spot available, usually relocating from a windward to a leeward position, and then the heat distribution around the huddle was recalculated. Repeated iterations showed the huddle gradually elongating and creeping downwind over time.
At first the model assumed perfectly steady wind patterns and identical penguins, but produced huddle shapes that were longer and thinner than those observed in nature. When the researchers added uncertainty, which could represent irregular wind eddies and natural differences in the size and cold tolerance of individual penguins, the modeled huddles closely matched real huddles.
The researchers were surprised the model showed the penguins shared warmth nearly equally among themselves. "Even if penguins are only selfish, only trying to find the best spot for themselves and not thinking about their community, there is still equality in the amount of time that each penguin spends exposed to the wind," says Blanchette. Not all instances of selfish behavior result in such fair outcomes, he notes. "A penguin huddle is a self-sufficient system in which the animals rely on each other for shelter, and I think that is what makes it fair. If you have some kind of obstacle, like a wall, then I think it would stop being fair," Blanchette says.
Currently the researchers would like feedback from biologists before they further refine the model. Gathering experimental data, however, is difficult. "Penguins huddle during blizzards, when the conditions are horrible, and if you're going to collect data you're also going to be in a blizzard in horrible conditions," Blanchette points out. The mathematicians hope their work might serve as a guide for scientists in the field, helping them to know which observations to make to test the model.
Blanchette says his group may also investigate how to adapt the model to describe other biological organisms, such as certain bacteria, that move as a group in response to an outside stimulus like food or the presence of a toxin. Eventually, concepts from the model may guide the design of swarming robots that shelter each other in harsh conditions. But for now Blanchette is enjoying a more immediate side benefit of the research: "Nearly everybody seems to love penguins and not enough people love math," he says. "If we use math to study penguins we could potentially teach more people to love math too!"
Paper: "Modeling huddling penguins" is published in PLOS ONE at 5:00 p.m. on Friday, Nov. 16. Link: http://dx.plos.org/10.1371/journal.pone.0050277
Presentation: "Modeling huddling penguins" is at 10:56 a.m. on Monday, Nov. 19 in room 28A. Abstract: http://meeting.aps.org/Meeting/DFD12/Event/178234MORE MEETING INFORMATION
Selected entries from the Gallery of Fluid Motion will be hosted as part of the Fluid Dynamics Virtual Press Room. In mid-November, when the Virtual Press Room is launched, another announcement will be sent out.
This release was prepared by the American Institute of Physics (AIP) on behalf of the American Physical Society's (APS) Division of Fluid Dynamics (DFD).ABOUT THE APS DIVISION OF FLUID DYNAMICS
Charles Blue | EurekAlert!
Australian technology installed on world’s largest single-dish radio telescope
26.09.2016 | International Centre for Radio Astronomy Research (ICRAR)
How to merge two black holes in a simple way
26.09.2016 | Plataforma SINC
The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.
“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...
With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.
Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...
For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.
Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...
At AKL’16, the International Laser Technology Congress held in May this year, interest in the topic of process control was greater than expected. Appropriately, the event was also used to launch the Industry Working Group for Process Control in Laser Material Processing. The group provides a forum for representatives from industry and research to initiate pre-competitive projects and discuss issues such as standards, potential cost savings and feasibility.
In the age of industry 4.0, laser technology is firmly established within manufacturing. A wide variety of laser techniques – from USP ablation and additive...
Every three years, the plastics industry gathers at K, the international trade fair for plastics and rubber in Düsseldorf. The Fraunhofer Institute for Laser Technology ILT will also be attending again and presenting many innovative technologies, such as for joining plastics and metals using ultrashort pulse lasers. From October 19 to 26, you can find the Fraunhofer ILT at the joint Fraunhofer booth SC01 in Hall 7.
K is the world’s largest trade fair for the plastics and rubber industry. As in previous years, the organizers are expecting 3,000 exhibitors and more than...
23.09.2016 | Event News
20.09.2016 | Event News
16.09.2016 | Event News
26.09.2016 | Physics and Astronomy
26.09.2016 | Physics and Astronomy
26.09.2016 | Life Sciences