First there was McSleepyTM. Now it’s time to introduce the first intubation robot operated by remote control. This robotic system named The Kepler Intubation System (KIS), and developed by Dr. Thomas M. Hemmerling, McGill University Health Centre (MUHC) specialist and McGill University Professor of Anesthesia and his team, may facilitate the intubation procedure and reduce some complications associated with airway management. The world’s first robotic intubation in a patient was performed at the Montreal General Hospital earlier this month by Dr. Hemmerling.
“The KIS allows us to operate a robotically mounted video-laryngoscope using a joystick from a remote workstation,” says Dr. Hemmerling who is also a neuroscience researcher at the Research Institute of the MUHC. “This robotic system enables the anaesthesiologist to insert an endotracheal tube safely into the patient’s trachea with precision.”
The insertion of an endotracheal tube allows artificial ventilation, which is used in almost all cases of general anesthesia. Correct insertion of this tube into patients’ airways is a complex manoeuvre that requires considerable experience and practice to master. “Difficulties arise because of patient characteristics but there is no doubt that there are also differences in individual airway management skills that can influence the performance of safe airway management,” says Dr. Hemmerling. “These influences may be greatly reduced when the KIS is used.”
After successfully performing extensive tests in the airways of medical simulation mannequins, which closely resemble intubation conditions in humans, clinical testing in patients has now begun.
“High tech equipment has revolutionized the way surgery is done, allowing the surgeon to perform with higher precision and with almost no physical effort - I believe that the KIS can do for anesthesia what these systems have done for surgery”, says Dr. Armen Aprikian, Director of MUHC’s Department of Urology who performed surgery on the first patient treated using the KIS.
”We think that The Kepler Intubation System can assist the anesthesiologist’s arms and hands to perform manual tasks with less force, higher precision and safety. One day, it might actually be the standard practice of airway management," concludes Dr. Hemmerling, whose laboratory developed the world's first anesthesia robot, nicknamed McSleepyTM, in 2008, which provides automated anesthesia delivery.
About the McGill University Health Centre (MUHC) One of the world’s foremost academic health centres, the MUHC offers exceptional and integrated patient-centric care, research and teaching. Highly committed to the continuum of care in its community and affiliated with the Faculty of Medicine of McGill University, The Montreal Children's Hospital, the Montreal General Hospital, the Royal Victoria Hospital, the Montreal Neurological Hospital, the Montreal Chest Institute and the Lachine Hospital of the MUHC value multidisciplinary service throughout the lifespan, innovative technologies and practices, strategic partnerships and leadership in knowledge transfer. The MUHC is currently carrying out a $2.25-billion Redevelopment Project on three campuses—the Mountain, the Glen and Lachine—designed to provide healthcare professionals with an effective environment in which to ensure patients and their families benefit from The Best Care for Life. The campuses are also anchored in best sustainable-development practices, including LEED® and BOMA BESt guidelines.www.muhc.ca www.muhc.ca/construction
Julie Robert | EurekAlert!
Termination of lethal arrhythmia with light
13.09.2016 | Rheinische Friedrich-Wilhelms-Universität Bonn
Sensor systems identify senior citizens at risk of falling within 3 weeks
29.08.2016 | University of Missouri-Columbia
The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.
“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...
With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.
Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...
For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.
Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...
At AKL’16, the International Laser Technology Congress held in May this year, interest in the topic of process control was greater than expected. Appropriately, the event was also used to launch the Industry Working Group for Process Control in Laser Material Processing. The group provides a forum for representatives from industry and research to initiate pre-competitive projects and discuss issues such as standards, potential cost savings and feasibility.
In the age of industry 4.0, laser technology is firmly established within manufacturing. A wide variety of laser techniques – from USP ablation and additive...
Every three years, the plastics industry gathers at K, the international trade fair for plastics and rubber in Düsseldorf. The Fraunhofer Institute for Laser Technology ILT will also be attending again and presenting many innovative technologies, such as for joining plastics and metals using ultrashort pulse lasers. From October 19 to 26, you can find the Fraunhofer ILT at the joint Fraunhofer booth SC01 in Hall 7.
K is the world’s largest trade fair for the plastics and rubber industry. As in previous years, the organizers are expecting 3,000 exhibitors and more than...
23.09.2016 | Event News
20.09.2016 | Event News
16.09.2016 | Event News
23.09.2016 | Life Sciences
23.09.2016 | Health and Medicine
23.09.2016 | Life Sciences