With increasing numbers of information-based interactions among humans, machines and objects, especially as new services, new terminals and new needs emerge, the networks are required to provide flexible, energy-efficient, safe and broadband access services anywhere at any time, and therefore wideband and ubiquitous information access has become the great demand of the modern information society.
However, it is difficult to meet the growing demand with the existing technologies, so new solutions must be explored as a matter of urgency. The intelligent radio-over-fiber (I-ROF) system, which combines the advantages of flexible wireless access and fiber-optic broadband transmission, uses the methods of microwave photonics to realize the generation of multi-band, multi-standard microwave signals in the optical domain, along with broadband processing, large dynamic transmission, fast access and reconfigurable networking, and can thus provide an effective way to achieve broadband and ubiquitous access.
With the support of the National Program for Key Basic Research Project of China (973 Program, Grant No. 2012CB315705) and the National High-Tech R&D Program of China (863 Program, Grant No. 2011AA010306), a research group led by Professor Ji YueFeng, who is with Beijing University of Posts and Telecommunications and who is also the Chief Scientist of the National 973 Program, have focused on I-ROF systems and have studied the fundamental principles, network architecture and enabling technologies of I-ROF systems from the viewpoints of the required modules, system applications and networking. Also, a broadband access and ubiquitous sensing oriented, large dynamic, reconfigurable, and distributed I-ROF system experimental platform has been built to realize broadband wireless access applications. The group's work, entitled "Large dynamic, reconfigurable, distributed intelligent radio-over-fiber (I-ROF) system", was published in SCIENCE CHINA Information Sciences, 2012, vol. 42 (10).
The research group focused on the large demand for broadband access and for ubiquitous sensing for the Internet of Things and other applications, and proposed a large dynamic and reconfigurable distributed I-ROF system, which can meet this great demand. Also, the fundamental principles, network architecture and enabling technologies for these I-ROF systems in terms of modules, system applications and networking have also been studied. From the viewpoint of the modules, broadband and multi-standard microwave/millimeter-wave band vector signal generation, instantaneous photonic microwave frequency measurements, broadband and tunable microwave photonic filters based on photonic crystals, and broadband, high efficiency electromagnetic band gap structured antennas were investigated. For system applications, a large dynamic ROF system, a cognitive, collaborative and power efficient ROF system, and an optical and wireless resources joint management I-ROF system were covered. For networking, the network architecture of the I-ROF and the media access control (MAC) protocol for the distributed ROF network were studied. Based on the results of these studies, a broadband access and ubiquitous sensing oriented, large dynamic, reconfigurable, and distributed I-ROF system experimental platform was built to realize broadband processing of multi-band, multi-standard microwave signals in the optical domain, large-scale dynamic transmission and reconfigurable networking.
This new generation of I-ROF systems is typically representative of microwave photonics, which is broadband and oriented toward ubiquitous information access, and has the advantages of broadband operation over the full frequency band, a reconfigurable architecture and easy scalability. It also allows low operational energy consumption. I-ROF is therefore an appropriate direction for future development and has broad application prospects.
See the article: Ji Y. F., Xu K., Tian H. P., Wang H. X. Large dynamic, reconfigurable, distributed intelligent radio-over-fiber (I-ROF) system [J]. Scientia Sinica Informationis, 2012, 42(10): 1204-1216.
Yan Bei | EurekAlert!
Further reports about: > Broadband > Energy-efficient > I-ROF > Large Hadron Collider > ROF > broadband processing > enabling technologies > fiber-optic broadband transmission > information access > intelligent radio-over-fiber (I-ROF) system > large-scale dynamic transmission > microwave signals > multi-standard microwave signals > photonic crystal > tunable microwave photonic filters
Optical fiber transmits one terabit per second – Novel modulation approach
16.09.2016 | Technische Universität München
Researchers prototype system for reading closed books
09.09.2016 | Massachusetts Institute of Technology
The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.
“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...
With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.
Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...
For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.
Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...
At AKL’16, the International Laser Technology Congress held in May this year, interest in the topic of process control was greater than expected. Appropriately, the event was also used to launch the Industry Working Group for Process Control in Laser Material Processing. The group provides a forum for representatives from industry and research to initiate pre-competitive projects and discuss issues such as standards, potential cost savings and feasibility.
In the age of industry 4.0, laser technology is firmly established within manufacturing. A wide variety of laser techniques – from USP ablation and additive...
Every three years, the plastics industry gathers at K, the international trade fair for plastics and rubber in Düsseldorf. The Fraunhofer Institute for Laser Technology ILT will also be attending again and presenting many innovative technologies, such as for joining plastics and metals using ultrashort pulse lasers. From October 19 to 26, you can find the Fraunhofer ILT at the joint Fraunhofer booth SC01 in Hall 7.
K is the world’s largest trade fair for the plastics and rubber industry. As in previous years, the organizers are expecting 3,000 exhibitors and more than...
23.09.2016 | Event News
20.09.2016 | Event News
16.09.2016 | Event News
23.09.2016 | Life Sciences
23.09.2016 | Health and Medicine
23.09.2016 | Life Sciences