Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Unexpected microbes fighting harmful greenhouse gas

21.11.2012
Nature has a larger army than previously thought combating nitrous oxide -- according to a study by Frank Loeffler, University of Tennessee, Knoxville -- Oak Ridge National Laboratory Governor's Chair for Microbiology, and his colleagues

The environment has a more formidable opponent than carbon dioxide. Another greenhouse gas, nitrous oxide, is 300 times more potent and also destroys the ozone layer each time it is released into the atmosphere through agricultural practices, sewage treatment and fossil fuel combustion.

Luckily, nature has a larger army than previously thought combating this greenhouse gas—according to a study by Frank Loeffler, University of Tennessee, Knoxville–Oak Ridge National Laboratory Governor's Chair for Microbiology, and his colleagues.

The findings are published in the Nov. 12 edition of the Proceedings of the National Academy of Sciences.

Scientists have long known about naturally occurring microorganisms called denitrifiers, which fight nitrous oxide by transforming it into harmless nitrogen gas. Loeffler and his team have now discovered that this ability also exists in many other groups of microorganisms, all of which consume nitrous oxide and potentially mitigate emissions.

The research team screened available microbial genomes encoding the enzyme systems that catalyze the reduction of the nitrous oxide to harmless nitrogen gas.

They discovered an unexpected broad distribution of this class of enzymes across different groups of microbes with the power to transform nitrous oxide to innocuous nitrogen gas. Within these groups, the enzymes were related yet evolutionarily distinct from those of the known denitrifiers. Microbes with this capability can be found in most, if not all, soils and sediments, indicating that a much larger microbial army contributes to nitrous oxide consumption.

"Before we did this study, there was an inconsistency in nitrous oxide emission predictions based on the known processes contributing to nitrous oxide consumption, suggesting the existence of an unaccounted nitrous oxide sink," said Loeffler. "The new findings potentially reconcile this discrepancy."

According to Loeffler, the discovery of this microbial diversity and its contributions to nitrous oxide consumption will allow the scientific community to advance its understanding of the ecological controls on global nitrous oxide emissions and to refine greenhouse gas cycle models.

"This will allow us to better describe and predict the consequences of human activities on ozone layer destruction and global warming," said Loeffler. "Our results imply that the analysis of the typical denitrifier populations provides an incomplete picture and is insufficient to account for or accurately predict the true nitrous oxide emissions."

Loeffler collaborated with researchers from the University of Illinois in Urbana-Champaign; the Georgia Institute of Technology; the U.S. Department of Agriculture in Urbana, Ill.; the University of Puerto Rico; and the National Institute of Abiotic Stress Management in Pune, India.

Whitney Heins | EurekAlert!
Further information:
http://www.utk.edu

More articles from Ecology, The Environment and Conservation:

nachricht How to detect water contamination in situ?
22.09.2016 | Tomsk Polytechnic University (TPU)

nachricht Quantifying the chemical effects of air pollutants on oxidative stress and human health
12.09.2016 | Max-Planck-Institut für Chemie

All articles from Ecology, The Environment and Conservation >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: OLED microdisplays in data glasses for improved human-machine interaction

The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.

“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...

Im Focus: Artificial Intelligence Helps in the Discovery of New Materials

With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.

Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...

Im Focus: Complex hardmetal tools out of the 3D printer

For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.

Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...

Im Focus: Launch of New Industry Working Group for Process Control in Laser Material Processing

At AKL’16, the International Laser Technology Congress held in May this year, interest in the topic of process control was greater than expected. Appropriately, the event was also used to launch the Industry Working Group for Process Control in Laser Material Processing. The group provides a forum for representatives from industry and research to initiate pre-competitive projects and discuss issues such as standards, potential cost savings and feasibility.

In the age of industry 4.0, laser technology is firmly established within manufacturing. A wide variety of laser techniques – from USP ablation and additive...

Im Focus: New laser joining technologies at ‘K 2016’ trade fair

Every three years, the plastics industry gathers at K, the international trade fair for plastics and rubber in Düsseldorf. The Fraunhofer Institute for Laser Technology ILT will also be attending again and presenting many innovative technologies, such as for joining plastics and metals using ultrashort pulse lasers. From October 19 to 26, you can find the Fraunhofer ILT at the joint Fraunhofer booth SC01 in Hall 7.

K is the world’s largest trade fair for the plastics and rubber industry. As in previous years, the organizers are expecting 3,000 exhibitors and more than...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Experts from industry and academia discuss the future mobile telecommunications standard 5G

23.09.2016 | Event News

ICPE in Graz for the seventh time

20.09.2016 | Event News

Using mathematical models to understand our brain

16.09.2016 | Event News

 
Latest News

Stronger turbine blades with molybdenum silicides

26.09.2016 | Materials Sciences

Scientists Find Twisting 3-D Raceway for Electrons in Nanoscale Crystal Slices

26.09.2016 | Materials Sciences

Lowering the Heat Makes New Materials Possible While Saving Energy

26.09.2016 | Materials Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>