Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Disease Not a Factor in Tassie Tiger Extinction

01.02.2013
Humans alone were responsible for the demise of Australia’s iconic extinct native predator, the Tasmanian Tiger or thylacine, a new study led by the University of Adelaide has concluded.

Using a new population modelling approach, the study contradicts the widespread belief that disease must have been a factor in the thylacine’s extinction.

The thylacine was a unique marsupial carnivore found throughout most of Tasmania before European settlement in 1803. Between 1886 and 1909, the Tasmanian government encouraged people to hunt thylacines and paid bounties on over 2000 thylacine carcasses. Only a handful of animals were located after the bounty was lifted and the last known thylacine was captured from the wild in 1933.

“Many people, however, believe that bounty hunting alone could not have driven the thylacine extinct and therefore claim that an unknown disease epidemic must have been responsible,” says the project leader, Research Associate Dr Thomas Prowse, School of Earth and Environmental Sciences and the Environment Institute.

“We tested this claim by developing a ‘metamodel’ – a network of linked species models – that evaluated whether the combined impacts of Europeans could have exterminated the thylacine, without any disease.”

The mathematical models used by conservation biologists to simulate the fate of threatened species under different management strategies (called population viability analysis or PVA) traditionally neglect important interactions between species. The researchers designed a new approach to PVA that included species interactions.

“The new model simulated the directs effects of bounty hunting and habitat loss and, importantly, also considered the indirect effects of a reduction in the thylacine’s prey (kangaroos and wallabies) due to human harvesting and competition from millions of introduced sheep,” Dr Prowse says.

“We found we could simulate the thylacine extinction, including the observed rapid population crash after 1905, without the need to invoke a mystery disease.

“We showed that the negative impacts of European settlement were powerful enough that, even without any disease epidemic, the species couldn’t escape extinction.”

The study ‘No need for disease: testing extinction hypotheses for the thylacine using multi-species metamodels’, which also involved Professors Corey Bradshaw and Barry Brook from the University of Adelaide’s Environment Institute, Professor Chris Johnson from the University of Tasmania, and Dr Bob Lacy, Chicago Zoological Society, has been published online in the Journal of Animal Ecology.

1) Dr Thomas Prowse
Research Associate
School of Earth and Environmental Sciences Environment Institute
The University of Adelaide
Phone: +61 8 8313 6070
Mobile: +61 431 480 729
2)Professor Corey Bradshaw
Director, Ecological Modelling
School of Earth and Environmental Sciences
Environment Institute
The University of Adelaide
Mobile: +61 400 697 665
corey.bradshaw@adelaide.edu.au

| Newswise
Further information:
http://www.adelaide.edu.au

More articles from Ecology, The Environment and Conservation:

nachricht Malaysia's unique freshwater mussels in danger
27.09.2016 | The University of Nottingham Malaysia Campus

nachricht How to detect water contamination in situ?
22.09.2016 | Tomsk Polytechnic University (TPU)

All articles from Ecology, The Environment and Conservation >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: First quantum photonic circuit with electrically driven light source

Optical quantum computers can revolutionize computer technology. A team of researchers led by scientists from Münster University and KIT now succeeded in putting a quantum optical experimental set-up onto a chip. In doing so, they have met one of the requirements for making it possible to use photonic circuits for optical quantum computers.

Optical quantum computers are what people are pinning their hopes on for tomorrow’s computer technology – whether for tap-proof data encryption, ultrafast...

Im Focus: OLED microdisplays in data glasses for improved human-machine interaction

The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.

“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...

Im Focus: Artificial Intelligence Helps in the Discovery of New Materials

With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.

Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...

Im Focus: Complex hardmetal tools out of the 3D printer

For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.

Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...

Im Focus: Launch of New Industry Working Group for Process Control in Laser Material Processing

At AKL’16, the International Laser Technology Congress held in May this year, interest in the topic of process control was greater than expected. Appropriately, the event was also used to launch the Industry Working Group for Process Control in Laser Material Processing. The group provides a forum for representatives from industry and research to initiate pre-competitive projects and discuss issues such as standards, potential cost savings and feasibility.

In the age of industry 4.0, laser technology is firmly established within manufacturing. A wide variety of laser techniques – from USP ablation and additive...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Laser use for neurosurgery and biofabrication - LaserForum 2016 focuses on medical technology

27.09.2016 | Event News

Experts from industry and academia discuss the future mobile telecommunications standard 5G

23.09.2016 | Event News

ICPE in Graz for the seventh time

20.09.2016 | Event News

 
Latest News

New switch decides between genome repair and death of cells

27.09.2016 | Life Sciences

Nanotechnology for energy materials: Electrodes like leaf veins

27.09.2016 | Physics and Astronomy

‘Missing link’ found in the development of bioelectronic medicines

27.09.2016 | Life Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>