The 2011 Mineral, Virginia M-5.8 earthquake was felt over an extraordinarily large area. A new study details landslides triggered by the earthquake at distances four times greater and over an area 20 times larger than previously documented for M-5.8 earthquakes worldwide.
The study, to be published in the December issue of the Bulletin of the Seismological Society of America (BSSA), describes physical confirmation of previous observations that ground shaking from earthquakes in the eastern U.S. travels farther than in the western U.S, a plate-boundary region.
U.S. Geological Survey scientists Randall W. Jibson, who is scheduled to present his findings on Nov. 6 at the annual meeting of the Geological Society of America, and co-author Edwin L. Harp painstakingly mapped rock falls to determine the distance limits from the epicenter to compare with previously documented earthquakes.
The 2011 Virginia earthquake was the largest earthquake in the eastern U.S. since 1897. Although it did not produce large, damaging landslides, it did trigger small landslides of rock and soil from steep slopes.
Because landslides can occur without earthquake shaking, Jibson and Harp looked for evidence of recent physical disruption that could be attributed to the quake. From August 25 though September 3, Jibson and Harp made detailed observations by driving outward from the epicentral area in transects; they stopped frequently to get on their hands and knees to overturn rocks to see whether there was green grass underneath – a sign that the rock could have fallen during the quake. As they drove, they inspected highly susceptible slopes until they had reached an apparent limit for a particular area.
"We've been doing this for more than 30 years and have developed a consistent observational standard that isn't dependent on the observers," Jibson said. "We are confident we can accurately compare limits for different earthquakes."
The authors noted that Hurricane Irene passed near the area a few days after the quake, and they identified small rainfall-triggered debris flows that were quite distinct from rock falls triggered by the quake.
Landslide limits were documented along the Blue Ridge Parkway from near Harpers Ferry, West Virginia, southwestward to within 30 km of the Virginia-North Carolina border as well as on transects northwestward through the Appalachian Mountains into West Virginia. The limits to the east and south of the Blue Ridge are less well constrained owing to a lack of susceptible slopes. The authors propose an estimated elliptical area had there been equally susceptible landscape yielding evidence in all areas.
There is sufficient documented evidence, say Jibson and Harp, to suggest the need to revise the established distance limits for the occurrence of landslides in different tectonic environments.
For the eastern U.S., the documented landslides from the 2011 Virginia earthquake suggest that ground motion is stronger and travels farther parallel to the Appalachian Mountains than perpendicular to them, which is consistent with other sources of intensity information such as the U.S. Geological Survey's Did You Feel It? map.
Not all historical post-earthquake landslide investigations have been conducted at the same level of detail, and so they might not be directly comparable with the current study. Also, very few earthquakes in stable continental interiors, where ground motion is known to travel farther than in plate-boundary regions, have had thorough documentations of triggered landslides, noted the authors.
"Even taking differential landslide reporting into account," wrote the authors, "the landslide limits from the 2011 Virginia earthquake are extraordinary."
The paper, "Extraordinary Distance Limits of Landslides Triggered by the 2011 Mineral, Virginia Earthquake," will be published in the December issue, volume 102:6, of BSSA. The journal is published by the Seismological Society of America, which is an international scientific society devoted to the advancement of seismology and the understanding of earthquakes for the benefit of society.
Nan Broadbent | EurekAlert!
Giant see-saw of monsoon rains detected
26.09.2016 | Potsdam-Institut für Klimafolgenforschung
A new 3D viewer for improved digital geoscience mapping
20.09.2016 | Uni Research
Optical quantum computers can revolutionize computer technology. A team of researchers led by scientists from Münster University and KIT now succeeded in putting a quantum optical experimental set-up onto a chip. In doing so, they have met one of the requirements for making it possible to use photonic circuits for optical quantum computers.
Optical quantum computers are what people are pinning their hopes on for tomorrow’s computer technology – whether for tap-proof data encryption, ultrafast...
The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.
“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...
With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.
Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...
For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.
Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...
At AKL’16, the International Laser Technology Congress held in May this year, interest in the topic of process control was greater than expected. Appropriately, the event was also used to launch the Industry Working Group for Process Control in Laser Material Processing. The group provides a forum for representatives from industry and research to initiate pre-competitive projects and discuss issues such as standards, potential cost savings and feasibility.
In the age of industry 4.0, laser technology is firmly established within manufacturing. A wide variety of laser techniques – from USP ablation and additive...
27.09.2016 | Event News
23.09.2016 | Event News
20.09.2016 | Event News
27.09.2016 | Life Sciences
27.09.2016 | Physics and Astronomy
27.09.2016 | Life Sciences