A highly dexterous, bio-inspired artificial hand and sensory system that could provide patients with active feeling, is being developed by a European project.
Funded by the Future and Emerging Technologies initiative of the IST programme, the CYBERHAND project aims to hard wire this hand into the nervous system, allowing sensory feedback from the hand to reach the brain, and instructions to come from the brain to control the hand, at least in part.
Coordinated by Professor Paolo Dario with Professor Maria Chiara Carrozza leading the development of the hand, the project united researchers from Germany, Spain, Italy and Denmark.
So far, the project is racking up an impressive list of achievements. It has a complete, fully sensitised five-fingered hand. The CYBERHAND prototype has 16 Degrees of Freedom (DoFs) made possible by the work of six tiny motors.
Each of the five fingers is articulated and has one motor dedicated to its joint flexing for autonomous control. It features that miracle of evolution, the opposable thumb, so the device can perform different grasping actions.
Taking inspiration from the real hand, where a muscle pulls a tendon inside a synovial sheath, CYBERHANDs finger cables run through a Teflon sheath pulled by a DC motor. So the proximal, medial and distal phalanges, those bones between your finger knuckles, are all driven by the same tendon. This approach is called underactuation as there are more Degrees of Freedom than Degrees of Movement (motors); it means the prosthesis has a self-adaptive grasp.
"This is a fundamental feature of the CYBERHAND prosthesis because only a limited number of control signals are available for user’s voluntary control," says project manager, Dr Lucia Beccai. Importantly, it also means less user effort is required to control the hand during daylong use.
The CYBERHAND prototype integrates the two types of human senses. One senses where parts of the body are relative to other parts, whether our fingers are open or closed, for example. The other relates to taste, touch, sound, hearing and sight that tell us about the external world. CYBERHAND includes sensors for tension, force, joint angle, end stroke and contact in the final prototype.
This prototype uses Longitudinal IntraFascicular Electrodes (LIFEs) to connect the hand to the nervous system. Within the CYBERHAND project, in addition to traditional wire LIFEs, a new type of electrode has been developed to improve performance and make them less invasive in humans: the Thin Film LIFE (tfLIFE).
So far, the project has produced excellent science and engineering to create an impressive prototype. The next step is to test the device in humans.
Currently researchers are addressing all necessary medical and ethical issues for implantation in human volunteers. A clinical partner has been identified and the Local Ethical Committee has given the approval for the clinical validation of CYBERHAND system, which should begin in 2006.
Some companies have expressed interest in commercialising the system. Nevertheless, it could be five to eight years before the device clears all the tests necessary to prove its safety, usability, and robustness.
More articles from Health and Medicine:
Artificial Sweetener a Potential Treatment for Parkinson's Disease
18.06.2013 | American Friends of Tel Aviv University
Preventing eggs' death from chemotherapy
18.06.2013 | Northwestern University
... two engines aircraft project “Elektro E6”.
The countdown has been started for opening the gates again for the worldwide leading aviation and space event in Le Bourget, Paris from June 17th - 23rd, 2013.
EADCO & PC-Aero will present at the Paris Air Show in Hall H4 booth F-7 their new future aircraft and innovative project: ...
Siemens scientists have developed new kinds of ceramics in which they can embed transformers.
The new development allows power supply transformers to be reduced to one fifth of their current size so that the normally separate switched-mode power supply units of light-emitting diodes can be integrated into the module's heat sink.
The new technology was developed in cooperation with industrial and research partners who ...
Cheaper clean-energy technologies could be made possible thanks to a new discovery.
Led by Raymond Schaak, a professor of chemistry at Penn State University, research team members have found that an important chemical reaction that generates hydrogen from water is effectively triggered -- or catalyzed -- by a nanoparticle composed of nickel and phosphorus, two inexpensive elements that are abundant on Earth. ...
The Fraunhofer Institute for Laser Technology ILT generated a lot of interest at the LASER World of Photonics 2013 trade fair with its numerous industrial laser technology innovations.
Its highlights included beam sources and manufacturing processes for ultrashort laser pulses as well as ways to systematically optimize machining processes using computer simulations. There was even a specialist booth at the fair dedicated to the revolutionary technological potential of digital photonic production.
Now in its fortieth year, LASER World ...
It's not reruns of "The Jetsons", but researchers working at the National Institute of Standards and Technology (NIST) have developed a new microscopy technique that uses a process similar to how an old tube television produces a picture—cathodoluminescence—to image nanoscale features.
Combining the best features of optical and scanning electron microscopy, the fast, versatile, and high-resolution technique allows scientists to view surface and subsurface features potentially as small as 10 nanometers in size.
The new microscopy technique, described in the journal AIP Advances,* uses a beam of electrons to excite a specially ...
18.06.2013 | Materials Sciences
18.06.2013 | Health and Medicine
18.06.2013 | Life Sciences
14.06.2013 | Event News
13.06.2013 | Event News
10.06.2013 | Event News