Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

OFC/NFOEC 2010 to feature research breakthroughs on the future of broadband internet

16.03.2010
Major research conference to be held in San Diego, March 21-25, on future of optical communication

The world's largest international conference on optical communication and networking convenes this month from March 21-25 at the San Diego Convention Center. Nearly 10,000 attendees are expected at the Optical Fiber Communication Conference and Exposition/National Fiber Optic Engineers Conference (OFC/NFOEC), and journalists are invited to attend the meeting for free.

OFC/NFOEC is the premier meeting where experts from industry and academia intersect and share their results, experiences, and insights on the future of optical communication and the technologies that will enable it. This year's lineup will feature many engaging talks and panels, including:

PLENARY PRESENTATIONS: "Broadband in Africa" by Brian Herlihy, president, SEACOM, Mauritius; "Beyond Today's Broadband Networks" by Philippe Keryer, executive vice president, president, Carrier Product Group, Alcatel-Lucent, USA; and "Challenges for New Generation Networks" by Hideo Miyahara, president, NICT, Japan. To access speaker bios and talk abstracts, see: http://www.ofcnfoec.org/conference_program/Plenary.aspx.

MARKET WATCH, a three-day series of presentations and panel discussions on the applications and business of optical communications, featuring esteemed guest speakers from the industrial, research and investment communities. See: http://www.ofcnfoec.org/conference_program/Market_Watch.aspx.

SERVICE PROVIDER SUMMIT, a dynamic program with topics and speakers of interest to CTOs, network architects, network designers and technologists within the service provider and carrier sector. See: http://www.ofcnfoec.org/conference_program/Service_Provider_Summit.aspx.

SCIENTIFIC HIGHLIGHTS

The conference also features a comprehensive technical program with talks covering the latest research related to all aspects of optical communication. Much of the research being presented in 2010 covers what's in store for the future of broadband Internet. Some of the highlights, outlined below, include:

- An Express-Lane for the Internet
- Piping Wireless into the Home
- Looking into the Future of Data-Routing with IRIS
- A Better Way to Watch YouTube: OpenFlow Opens Up Carrier Networks
Additional research summaries in the areas of green IT, optical interconnects in supercomputers, and an all-optical fast Fourier transform are available online at: http://www.ofcnfoec.org/media_center/ofc_releases/2010/AddnlNews.aspx.

Research news on using LEDs to broadcast data (http://www.ofcnfoec.org/media_center/ofc_releases/2010/DeskLamp.aspx) and cloud computing (http://www.ofcnfoec.org/media_center/ofc_releases/2010/BacktotheFuture.aspx) has also been announced.

AN EXPRESS-LANE FOR THE INTERNET

The Internet is expected to be inundated in the future with billions of gigabytes (or exabytes) of data as high-definition video and other bandwidth-busting downloads become the norm. The cost of upgrading the Internet for this so-called "exaflood" could make Web connections too expensive for most consumers. Internet service providers may be able to keep prices down by opening up an express-lane for large data hauls.

It is estimated that 99 percent of the traffic volume of the Internet is devoted to large downloads—like movies, medical scans and financial data— that are only 1 percent of all data transfer sessions. These huge bundles are currently handled in the same way all data is handled by the Internet: the files are chopped up into little packets and then shuffled through traffic. Although this works fine for e-mail and Web pages, says MIT researcher Vincent Chan, it is very inefficient for large streams of data. An alternative, called optical flow switching (OFS), essentially opens a direct line between users that they can use for a few seconds all to themselves.

To reserve a spot on this express lane, users would send a request over the normal Internet. The most that someone would have to wait is a few seconds before data will start flowing. That's plenty fast for most people, but some users will be willing to pay extra to jump ahead in the queue.

Chan says that OFS can reduce the price per bit by 50 times compared to current electronic packet switching. The savings come from a simplified network architecture that has less overhead devoted to processing data address labels. An OFS test bed has been in operation for the last 10 years, connecting U.S. government sites on the east coast. Chan says there is now a "groundswell" of interest in OFS from Asia and Europe.

Talk OWI6, "Optical Flow Switching" (Wednesday, March 24, 9:30 - 10 a.m.)

PIPING WIRELESS INTO THE HOME

Besides carrying digital data, optical fibers can also transmit radio signals for wireless communication. So-called "radio-over-fiber" technology has been used to provide access to radio dead zones, but new research is looking into using this technology to broadcast wireless closer to home.

Radio over fiber (RoF) modulates an optical wavelength in the fiber with a radio signal. This solves the attenuation problem during transport of the signal, while allowing the centralization of signal generation and processing equipment. A wireless signal can be simply relayed down the fiber to remote antennas that cost relatively little to install and should be immune to upgrades. RoF is already being used to transmit wireless signals into hard to reach areas like tunnels and stadiums.

In his talk, Mikhail Popov of Acreo AB in Sweden reviews options for taking RoF into homes and buildings along the optical access (PON) infrastructure, as part of a general trend toward merging wired and wireless communication. Fiber in this case would already be carrying Internet traffic, but it could also carry cell phone conversations transmitted over a remote antenna installed in the premises. In a multi-user scenario, the radio signals would pass directly onto the fiber without any processing. However, for a single home, it would make more sense to set up a "femtonode" that converts the radio waves from wireless devices into Internet data and uses the home Internet connection to connect to other mobile users. In any case, this network sharing could provide indoor wireless coverage at a fraction of the cost of relying solely on outdoor base stations, Popov says.

In the future, wireless home networks may be built on an RoF skeleton. As of now, most homes and businesses use WiFi to connect to laptops, but soon TVs and other media devices may need a wireless hook-up. One way to get more bandwidth is to trade WiFi for ultra-wideband (UWB), which can support data rates that are 1,000 times faster. The trouble is that UWB can only travel approximately 10 meters and is unable to penetrate walls, so there needs to be a way to distribute the signal throughout a house or building.

One solution is to use optical fibers. In a separate talk, Benoit Charbonnier of R&D Orange FT Group in France will describe a UWB RoF network that he and his colleagues have built. Their design calls for the UWB signal being transmitted and received by access points in each room. These access points simply relay the wireless signal over the fiber network to a central hub that down-converts the radio frequency to facilitate processing. This network architecture allows all the hardware to be transparent to whatever wireless products are being used in the home. Charbonnier will present recent test results that show his team's RoF network can distribute a 3 Gbit/s signal with good fidelity.

Talk OWQ6, "The Convergence of Wired and Wireless Services Delivery in Access and In-Home Networks" (Wednesday, March 24, 2:30 - 3 p.m.)

Talk OThO3, "Ultra-Wideband Radio over Fiber Techniques and Networks" (Thursday, March 25, 1:30 - 2 p.m.)

LOOKING INTO THE FUTURE OF DATA-ROUTING WITH IRIS

The Internet is on the verge of overheating, as big network routers are forced to sort through more and more data packets. One solution is to install photonic routers that leave data in the form of light, thereby avoiding unnecessary electronic processing. Researchers at Alcatel-Lucent Bell Labs and LGS Innovations, both in New Jersey, have built an operational photonic router prototype that could conceivably manage hundreds of terabits of data per second.

The DARPA-funded IRIS project is unique among other photonic routers in that it separates the two main jobs of a router: switching where packets go and managing when packets leave. This division of labor makes it easy to scale the design up for higher data rates. Like a traditional router, IRIS is connected to multiple optical fibers as input and output. Each fiber carries several wavelengths of light that encode their own separate stream of data packets. IRIS only reads and electronically processes the address header of each incoming data packet. The actual information contained in the packet is held temporarily inside a small integrated optical buffer until its time of departure. "The packet does not get converted into an electronic signal at any point," says Jurgen Gripp of Bell Labs, Alcatel-Lucent. This can provide power savings over electronic routers in many but not all cases.

Gripp and his team members designed and built IRIS in such a way that light packets travel on photonic integrated circuits. "The level of integration of optical components is a breakthrough," Gripp says. The researchers have tested the IRIS prototype on a network testbed and are now preparing to hook it up to commercial routers so that real Internet traffic can flow through it.

Talk OThP3, "Photonic Terabit Routers: The IRIS Project" (Thursday, March 25, 1:30 – 2 p.m.)

A BETTER WAY TO WATCH YOUTUBE: OPENFLOW OPENS UP CARRIER NETWORKS

To ensure that we can all watch YouTube without interruption, major Internet service providers must manage two very different switching technologies. Wide area "IP" networks made up of packet switches are interconnected over long distances by circuit-switched "transport" networks.

A typical service provider operates and manages these two networks independently, leading to a duplication of functionality and resources as well as to higher operating costs. Additionally, the two networks do not dynamically interact. For example, in response to long-term changes in demand, IP network controllers must contact circuit-switch network controllers, who adjust the long-distance pipelines by manually plugging in new circuits that increase or decrease the bandwidth.

"This is a long, drawn-out process that can take days or week to accomplish," said Guru Parulkar. He and his team at Stanford University have developed a way to merge the two network architectures that could allow Internet service providers to cut costs and to respond more flexibly to the needs of their users.

Past efforts to bridge packet-based and circuit-based technologies have approached the problem with the assumption that the two networks, which have very different architectures, must remain distinct. As a result, trying to span the two networks has resulted in very complex solutions. The transformation of circuit-based technology to IP has vastly changed this equation as both packet-based and circuit-based applications run on the same IP platform. But little has been done to show the possibility and consistency of a uniform solution. The OpenFlow project takes advantage of this architectural evolution in the direction of true convergence. It merges the two types of networks by blurring the distinction between packet switches and circuit switches, presenting them both as "data-plane" flow switch abstractions (that switch at different granularities) to an external, decoupled "control plane." Such an abstraction is achieved between the controller and the switches via the OpenFlow protocol. This then enables new capabilities that can exploit the mix of switching technologies dynamically.

For example, the "controller can configure a circuit in seconds instead of days or weeks," said Vinesh Gudla, one of the students working on the project. Gudla will present a set-up of two packet switches connected by a circuit switch that uses OpenFlow to stream video.

Talk OtuG2, "Experimental Demonstration of OpenFlow Control of Packet and Circuit Switches" (Tuesday, March 23, 2:30 - 2:45 p.m.)

MORE MEETING INFORMATION

The OFC/NFOEC Web site is http://www.ofcnfoec.org/. In addition to comprehensive technical programming information, the site includes details on the trade show and exposition, where the latest in optical technology from more than 500 of the industry's key companies will be on display.

JOURNALIST REGISTRATION

Members of the press who wish to attend the meeting should contact Angela Stark at astark@osa.org. More information can be found online at the OFC/NFOEC media center: http://www.ofcnfoec.org/media_center/index.aspx.

ABOUT OFC/NFOEC

Since 1979, the Optical Fiber Communication Conference and Exposition (OFC) has provided an annual backdrop for the optical communications field to network and share research and innovations. In 2004, OFC joined forces with the National Fiber Optic Engineers Conference (NFOEC), creating the largest and most comprehensive international event for optical communications. By combining an exposition of approximately 500 companies with a unique program of peer-reviewed technical programming and special focused educational sessions, OFC/NFOEC provides an unparalleled opportunity, reaching every audience from service providers to optical equipment manufacturers and beyond. OFC/NFOEC is managed by the Optical Society (OSA) and co-sponsored by OSA, the Institute of Electrical and Electronics Engineers/Communications Society (IEEE/ComSoc) and the IEEE Photonics Society. Acting as non-financial technical co-sponsor is Telcordia Technologies, Inc.

Angela Stark | EurekAlert!
Further information:
http://www.osa.org

More articles from Information Technology:

nachricht Terahertz spectroscopy goes nano
20.10.2017 | Brown University

nachricht New software speeds origami structure designs
12.10.2017 | Georgia Institute of Technology

All articles from Information Technology >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Neutron star merger directly observed for the first time

University of Maryland researchers contribute to historic detection of gravitational waves and light created by event

On August 17, 2017, at 12:41:04 UTC, scientists made the first direct observation of a merger between two neutron stars--the dense, collapsed cores that remain...

Im Focus: Breaking: the first light from two neutron stars merging

Seven new papers describe the first-ever detection of light from a gravitational wave source. The event, caused by two neutron stars colliding and merging together, was dubbed GW170817 because it sent ripples through space-time that reached Earth on 2017 August 17. Around the world, hundreds of excited astronomers mobilized quickly and were able to observe the event using numerous telescopes, providing a wealth of new data.

Previous detections of gravitational waves have all involved the merger of two black holes, a feat that won the 2017 Nobel Prize in Physics earlier this month....

Im Focus: Smart sensors for efficient processes

Material defects in end products can quickly result in failures in many areas of industry, and have a massive impact on the safe use of their products. This is why, in the field of quality assurance, intelligent, nondestructive sensor systems play a key role. They allow testing components and parts in a rapid and cost-efficient manner without destroying the actual product or changing its surface. Experts from the Fraunhofer IZFP in Saarbrücken will be presenting two exhibits at the Blechexpo in Stuttgart from 7–10 November 2017 that allow fast, reliable, and automated characterization of materials and detection of defects (Hall 5, Booth 5306).

When quality testing uses time-consuming destructive test methods, it can result in enormous costs due to damaging or destroying the products. And given that...

Im Focus: Cold molecules on collision course

Using a new cooling technique MPQ scientists succeed at observing collisions in a dense beam of cold and slow dipolar molecules.

How do chemical reactions proceed at extremely low temperatures? The answer requires the investigation of molecular samples that are cold, dense, and slow at...

Im Focus: Shrinking the proton again!

Scientists from the Max Planck Institute of Quantum Optics, using high precision laser spectroscopy of atomic hydrogen, confirm the surprisingly small value of the proton radius determined from muonic hydrogen.

It was one of the breakthroughs of the year 2010: Laser spectroscopy of muonic hydrogen resulted in a value for the proton charge radius that was significantly...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

ASEAN Member States discuss the future role of renewable energy

17.10.2017 | Event News

World Health Summit 2017: International experts set the course for the future of Global Health

10.10.2017 | Event News

Climate Engineering Conference 2017 Opens in Berlin

10.10.2017 | Event News

 
Latest News

Terahertz spectroscopy goes nano

20.10.2017 | Information Technology

Strange but true: Turning a material upside down can sometimes make it softer

20.10.2017 | Materials Sciences

NRL clarifies valley polarization for electronic and optoelectronic technologies

20.10.2017 | Interdisciplinary Research

VideoLinks
B2B-VideoLinks
More VideoLinks >>>